LIQUID EARS AUM14136 Wireless Speaker Delivering The Ultimate User Manual
- June 1, 2024
- Liquid Ears
Table of Contents
LIQUID EARS AUM14136 Wireless Speaker Delivering The Ultimate
Product Overview
- Tap for the previous song, press and hold to reduce the volume
- Tap for the next song, press and hold to increase volume
- Tap for play and pause, press and hold for mode change(Wireless/FM/AUX/TF Card/USB)
- TF card slot (support 32G max). TF card not included.
- AUX in slot
- USB slot
- Micro USB charging port
- OFF/ON button
Charging The Speaker
- Insert the supplied Micro USB charging cable into the charging port ⑦ on the back of the speaker.
- Insert the USB-A Cable into a suitable USB charger. It is recommended to use a product with a 5V charger (not included).
- A red LED indicator will remain on while charging and the LED will switch off when fully charged.
Wireless Connection
- Switch on the speaker ⑧.
- Open the wireless menu on your wireless device and find “AUM14136” for pairing.
- The speaker will beep once successfully paired to a device. If a new device needs to connect to the speaker, please remove the wireless connection from the paired device.
FM Radio
- Press the M button ③ on the speaker to switch to FM radio mode.
- Press ③ to search for radio stations. The available channels will be stored after the search is completed.
- Press ①② buttons to select radio stations.
- For an improved FM radio signal, plug the supplied Micro USB charging cable into the charging port ⑦.
Hands-Free Calling
When a phone call comes in on your connected device, press button ③ on the
speaker to answer or end the call. Press button ③ twice to re-dial or reject
the phone call.
Wired Connection
- Use the supplied 3.5mm audio cable to plug into the AUX port ⑤ on the speaker. The speaker will automatically switch to AUX mode.
- Connect the other end of the 3.5mm audio cable to your device. You can now play audio content through the speaker.
TF Card
- Insert TF card (not included) with music into TF card slot ④ on speaker.
- The speaker will automatically switch to the TF Card mode and will start playing audio content after card reading.
- Supported music file formats: MP3, WAV
- TF card supports a maximum capacity: of 32G
USB – Port
Insert a USB-A flash drive (not included) into USB-A port ⑥ on the back of the
speaker. The speaker will automatically switch to USB music mode and will
start playing audio content after reading the USB flash drive.
Specifications
- Speaker Output: 3W
- Wireless Operating Distance: 10m
- Battery Capacity: 1200mAh
- Input: DC 5V 0.5A
Contents
- 1 x Wireless Speaker
- 1 x Micro USB Charging Cable
- 1 x 3.5mm Audio Cable
- 1 x User Guide
Liquid Ears
PO Box 5658 Brendale QLD Australia 4500
Customer Support 1800 812 261 www.liquidears.com
DESIGNED IN AUSTRALIA
WARNING: The included charging cable is for use with this product only.
Charging cable maximum load: 5V/0.5A
WARNING
- Do not dispose of the unit in fire or water.
- Never attempt to disassemble and reassemble.
- Waste electrical products should not be disposed of with household waste, please recycle where facilities exist.
- Check with your local authority for recycling advice. Keep your device and all accessories out of the reach of children and animals.
- Small parts may cause choking or serious injury if swallowed.
- Avoid exposing your device to very cold or very hot temperatures (below 0˚C or above 45˚C).
- Extreme temperatures can cause the deformation of the device and reduce the charging capacity and life of your device.
- Do not allow your device to get wet — liquids can cause serious damage.
- Do not handle your device with wet hands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>