ambe RIR3000 Outdoor Radiant Infrared Heater Instructions
- June 3, 2024
- Ambe
Table of Contents
ambe RIR3000 Outdoor Radiant Infrared Heater Instructions
RIR3000 | RIR2000
STEP 1
Download the SunKare Heating App
Scan the QR code to download the app or search ‘SunKare Heating’ on the App
Store (iOS) or Google Play (Android)
STEP 2
Connect your mobile device to your heater
Make sure there is power to your heater but the heater should be off.
There will be a visible blue light on the heater.
Heater light indicators
In your mobile settings, turn your Bluetooth on and search for devices.
While your mobile is searching for devices, Press and Hold the On button on the supplied heater remote. The light on the heater will turn Red. Keep holding the remote On button until the heater ‘ AMBE Heater’ shows up on your mobile. This can take up to 30 seconds.
Once it appears, select the heater from the devices list and pair with your
mobile. The light will then turn Purple. The heater light stays purple when
paired with your phone.
STEP 3
Open the SunKare Heating App
Open the App and select ‘Heaters’ on the bottom right corner.
It may take a few seconds for your heater to appear on the list.
Once it appears, select the heater from the list.
You will be asked to create an 8-digit passcode.
STEP 4
Setup complete
You can now operate the heater from your mobile by turning it off and on, and
adjusting the heat level.
The heater will drop off the heaters list, and heater light turn Blue when you are out of Bluetooth range.
For further information visit the technical section of our website
ambehome.com
Read More About This Manual & Download PDF: