EFGBIKE ES09 Off Road Adults Electric Scooter User Manual

EFGBIKE ES09 Off Road Adults Electric Scooter User Manual

Check Before Riding

1. The seat must be adjusted to a comfortable and safe position.
2. The display must function correctly, and the lamp andhornshould be working properly.
3. The brake handle must be sensitive and reliable, ensuringthat the motor cuts off power during braking.
4. The speed switch must be flexible, reliable, nonappearance or loose motion.
5. The front and rear tires must have adequate air pressure, andwear should be normal.
6. The rotating parts should be flexible without any blockingphenomenon.
7. Check whether the battery has sufficient charge beforeriding.
8. The safety bolt at the pole fold must be fastened securely in place.

Safety Instruction for Use

1. This product is an electric scooter for adults, limited to one persononly, and should not be ridden with others at the same time.
2. Please wear safety helmets and other protective equipment whenriding this product.
3. Please use this product in accordance with local traffic regulations.
4. Please do not ride this product in unsafe or illegal places suchasmotorways.
5. Please practice in the open space first, and drive after skillfullycontrolling.
6. Please do not do dangerous actions or ride with one hand whilethescooter is driving. Keep your feet on the pedal
7. Do not ride in bad weather such as rain, snow and strong winds, soasnot to cause unnecessary injuries due to unnecessary factors.
8. Check that the safety lock is fastened before riding the scooter.

Charging Precautions

1. When charging, please place it in a safe location that is out of reachof
   children, and ensure that someone is present to manage it.

2. Please use the charger provided by our company for the scooter. Avoid using chargers from other sources to prevent safety issues.

3. Failure to store or recharge it correctly may result in battery damageand the inability to charge.

4. Always insert the charger into the battery charging port first, andthenconnect the charger to the power supply.

5. The red light indicates charging, and the green light indicates that
   charging is complete.

6. Do not operate the motor while it is charging.

7. Avoid accidental contact with any leaked material fromthe battery.

8. Please try to charge it in an open area. If the charger’s temperaturebecomes too high, please stop charging.

9. If you don’t use this product for an extended period, please chargeit at
   least once within 30 days. Keep the charging port clean and dry

The Main Technical Parameters

Parameters

Specifications| Maximum Load| 150kg（330LBS）
Tire Size| 11-inch
Assembly unit| Motor| 2800W*2
Battery| Lithium-ion Battery
Instrument| Multifunctional LCD Display
Brake| Hydraulic Disc Brake
Break handgrip| Power brake
Handlebar Grip| Silicone
Front and rear wheels| Vacuum tire
Main material| Iron and Aluminium Alloy

The Operating Instructions

1. When installing the handlebars, please alignthemiddlescale.
   
   

2. Opening operation:
   Step 1 : Press the folding button down by hand.
   Step 2: Push the lever upwards while press the folding button and listen for the sound of click. This will lock the security lock locked, completing the operation.

3. Folding operation:

4. Step 1 : Gently pull out the safety lock, then turn it outward, and placeit on the screw at the edge.
   Step 2: Press down the folding button that in the locked position. Atthe same time, pull down the Scooter Pole.
   Step 3: Fold the Pole.
   
   

Scooter Operating Instructions

Insert the key, turn it clockwise

1. ECO switch and single/dual switch used only for double motors scooters .ECO is speed limit, dual is dual driving switching.

2. The functional area consists of an accelerator lever, a start switch, speed adjustment buttons, a single/dual drive button, a light switch, and a display screen.

3. The acceleration lever is as shown. Pull down to accelerate to slow down. Please avoid excessive force during operationto prevent accidents.

4. Press the MODEL button, which is the speed adjustment button, toset the speed of the scooter. There are three options available:
   high-speed, medium speed, and low speed. You can adjust itaccording to your own requirements. Below the SPEED display, itshows the status of the gears, where ‘1’ indicates lowspeed, ‘2’ indicates medium speed, and ‘3’ indicates high-speed.

5. Through the display screen, we can obtain the total mileageof
   scooter’s driving, battery power consumption and driving speed.
   Note: the power consumption of the display screen can only providethe approximate power range. It is for reference purposes onlyandcannot accurately measure the power.

Tips for Riding

1. Please wear protective equipment when riding and complywithlocal traffic regulations.
2. During acceleration or deceleration, be mindful of the body’sweight distribution to avoid leaning forward. When standing, maintain a position with your feet one after the other, as it leads toamore secure and stable riding experience.
3. When making a turn, keep your body parallel to the handlebars. Please ensure that you pay attention to the road conditions beforeinitiating the turn. Make sure it is safe before proceeding withtheturn.
4. When applying the brakes, the body’s center of gravityshiftsbackward. It is important to learn to control the center of gravityduring braking. Failure to do so may the result in two situations: thescooter tilted forward and potential damage to the brake andsteeringsystems.

After-sales Maintenance

When the product meets the warranty conditions, we providefreemaintenance, replacement, and return services. The warrantyisprovided free of charge, except for delivery and shipping costs.

1. We provide 6 months of free warranty service fromthe dateof
   sale. The company is responsible for repairs within the warrantyperiod. After the warranty period, the company will charge for thecost of repairs.

2. Please ensure that the faulty product is properly packedfordelivery. Any damage or loss that occurs during transportationisnotthe company’s responsibility.

3. Disclaimer of liability:
   A. Failure or damage caused by abnormal operation.
   B. Failure or damage caused by abnormal installation.
   C. Opening and repairing the product without the company’sauthorization.
   D. Breakage of the product label. E. Other damages caused by human factors

The Warranty Reference for Electric Scooter

Note: Due to product upgrades by the company, some of the displayed content on the product you receive may differ from the instructions. However, this will not affect its normal use.

If you have any questions, pleasecontactus
Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>