EFGBIKE ES07 5600W Electric Scooter User Manual
- June 1, 2024
- EFGBIKE
Table of Contents
EFGBIKE ES07 5600W Electric Scooter
Check Before Riding
- The seat must be adjusted to a comfortable and safe position.
- The display must function correctly, and the lamp and horn should be working properly.
- The brake handle must be sensitive and reliable, ensuring that the motor cuts off power during braking.
- The speed switch must be flexible, reliable, and have no clearance or loose motion.
- The front and rear tyres must have adequate air pressure, and wear should be normal.
- The rotating parts should be flexible without any blocking phenomenon.
- Check whether the battery has sufficient charge before riding.
- The safety bolt at the pole fold must be fastened securely in place.
Safety Instruction for Use
- This product is an electric scooter for adults, limited to one person only, and should not be ridden with others at the same time.
- Please wear safety helmets and other protective equipment when riding this product.
- Please use this product for local traffic regulations.
- Please do not ride this product in unsafe or illegal places such as motorways.
- Please practice in the open space first, and drive after skillfully controlling.
- Please do not do dangerous actions or ride with one hand while the scooter is driving. Keep your feet on the pedal.
- Do not ride in bad weather such as rain, snow and strong winds, so as not to cause unnecessary injuries due to unnecessary factors.
- Check that the safety lock is fastened before riding the scooter.
Charging Precautions
- When charging, please place it in a safe location that is out of reach of children, and ensure that someone is present to manage it.
- please use the charger provided by our company for the scooter. Avoid using chargers from other sources to prevent safety issues.
- Failure to store or recharge it correctly may result in battery damage and the inability to charge.
- Always insert the charger into the battery charging port first, and then connect the charger to the power supply.
- The red light indicates charging, and the green light indicates that charging is complete.
- Do not operate the motor while it is charging.
- Avoid accidental contact with any leaked material from the battery.
- Please try to charge it in an open area. If the charger’s temperature becomes too high, please stop charging.
- If you don’t use this product for an extended period, please charge it at least once within 30 days. Keep the charging port clean and dry.
The Main Technical Parameters
Parameters
Specifications| Maximum Load| 150kg（330LBS）
Tire Size| 11-inch
Assembly unit
| Motor| 2800W*2
Battery| Lithium-ion Battery
Instrument| Multifunctional LCD Display
Headlight| Dual LED Headlights
Brake| Hydraulic Disc Brake
Break handgrip| Power Brake
Handlebar
Grip|
Silicone
Front and rear wheels| Vacuum tire
Main material| Iron and Aluminium Alloy
The Operating Instructions
- When installing the handlebars, please align them middle scale.
Opening operation
Step 1: Press the folding button down by hand.
Step 2: Push the lever upwards while pressing the folding button and
listen for the sound of the click. This will lock the security lock locked,
completing the operation.
Folding operation
Step 1: Gently pull out the safety lock, then turn it outward, and place
it on the screw at the edge.
Step 2: Press down the folding button in the locked position. Atthe same
time, pull down the Scooter Pole.
Step 3: Fold the Pole.
Scooter Operating Instructions
- ECO switch and single/dual switch used only for double motors scooters ECO is speed limit, dual is dual driving switching.
- The functional area consists of an accelerator lever, a start switch, speed adjustment buttons, a single/dual drive button, a light switch, and a display screen.
- The acceleration lever is as shown. Pull down to accelerate and release to slow down. Please avoid excessive force during operations to prevent accidents.
- Press the MODEL button, which is the speed adjustment button, to set the speed of the scooter. There are three options available: high-speed, medium speed, and low speed. You can adjust it according to your requirements. Below the SPEED display, it shows the status of the gears, where ‘1’ indicates low speed, ‘2’ indicates medium speed, and ‘3’ indicates high speed.
- Through the display screen, we can obtain the total mileage of the scooter’s driving, battery power consumption and driving speed.
Note: the power consumption of the display screen can only provide the approximate power range. It is for reference purposes only and cannot accurately measure the power.
Tips for Riding
- Please wear protective equipment when riding and comply with local traffic regulations.
- During acceleration or deceleration, be mindful of the body’s weight distribution to avoid leaning forward. When standing, maintain a position with your feet one after the other, as it leads to a more secure and stable riding experience.
- When making a turn, keep your body parallel to the handlebars. Please ensure that you pay attention to the road conditions before initiating the turn. Make sure it is safe before proceeding with the turn.
- When applying the brakes, the body’s centre of gravity shifts backward. It is important to learn to control the centre of gravity during braking. Failure to do so may result in two situations: the scooter tilted forward and potential damage to the brake and steering systems.
After-sales Maintenance
When the product meets the warranty conditions, we provide free maintenance,
replacement, and return services. The warranty is provided free of charge,
except for delivery and shipping costs.
- We provide 6 months of free warranty service from the date of sale. The company is responsible for repairs within the warranty period. After the warranty period, the company will charge for the cost of repairs.
- Please ensure that the faulty product is properly packed for delivery. Any damage or loss that occurs during transportation is not the company’s responsibility.
- Disclaimer of liability:
- Failure or damage caused by abnormal operation.
- Failure or damage caused by abnormal installation.
- Opening and repairing the product without the company’s authorization.
- Breakage of the product label.
- Other damages are caused by human factors.
The Warranty Reference for Electric Scooter
| Product name | Warranty year | No warranty |
|---|
Battery
| ****
Half year
| Damage and water ingress by
human factors
Motor
| ****
Half year
| Damage and water ingress by
human factors
Meter
| ****
Half year
| Damage and water ingress by
human factors
Controller
| ****
Half year
| Damage and water ingress by
human factors
Frame| Half year| Man-made destruction
Note: Due to product upgrades by the company, some of the displayed
content on the product you receive may differ from the instructions. However,
this will not affect its normal use. If you have any questions, please contact
us
Email: [email protected]