Anker X20 Soundcore Sports Instruction Manual
- June 1, 2024
- Anker
Table of Contents
Anker X20 Soundcore Sports
Product Information
Specifications
- Multi-function Button
- Charging Case Button
- USB-C Charging Port
FAQ
- Q: My earbuds are not connecting to the soundcore app. What should I do?
- A: Re-install or update the soundcore app to the latest version from your mobile app store. Ensure your earbuds are fully charged and try pairing again.
- Q: How do I customize controls on the earbuds?
- A: You can customize controls using the soundcore app. Refer to the app settings for detailed instructions on customizing controls.
- Q: How often should I clean my earbuds for optimal performance?
- A: It is recommended to regularly clean your earbuds using a cotton swab slightly moistened with rubbing alcohol to remove dust,earwax, or debris.
APP
- Download the soundcore app to experience adaptive noise cancelling, HearID sound, custom EQ, firmware update, and more exciting features.
- If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.
- Click this link to download: http://dl-soundcore.soundcore.com/qcdl?flow=soundcore
OVERVIEW
- Adjustable & Rotatable Earhook
- Charging Contactors
- Eartip
- Multi-function Button
- Charging Case Button
- USB-C Charging Port
PAIRING AND WEARING
PAIRING
After removing the insulation stickers on the earbuds, return earbuds to the charging case, then activate Bluetooth pairing by closing and reopening the case lid. Subsequently, the earbuds will automatically power on and enter Bluetooth pairing mode. Select “soundcore Sport X20” from your device’s Bluetooth list when connecting for the first time.
- When pairing, the LED light strip will start flashing white. After the pairing is successful, the LED light strip will stay on for 2 seconds and then go off.
- When taken out, the earbuds will automatically power off after 30 minutes if they are not connected. The duration can be set in the soundcore app.
WEARING
- Choose the ear tips that fit your ears best and take a fit test in the soundcore app to ensure you get the best ANC performance.
- Lift and bend the earhooks around your ears for a secure and comfortable fit.
- Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.
Tips: For a more comfortable wearing experience, hold the stems of the
adjustable and rotatable earhooks and stretch them to an appropriate length.
Dust, earwax or other debris can accumulate in the earbuds. To maintain
optimal sound quality, regularly clean your earbuds via using a cotton swab
slightly moistened with rubbing alcohol to gently wipe the metal mesh filter
under the rubber ear tips.
CHARGING
- Place the earbuds in the charging case and close it.
- Fully dry off the earbuds and the USB-C charging port before charging.
- Connect the charging case to a power supply by using the provided USB-C charging cable.
PAIRING WITH ANOTHER DEVICE
- To pair with another device, place the earbuds in the charging case and leave the case open.
- Press and hold the charging case button for 3 seconds until the LED light strip flashes white rapidly.
CONTROLS AND AMBIENT SOUND
CONTROLS
TWS
MONO
| TWS mode | Mono mode |
|---|
| Play / Pause| Press once (L/R)| Press once
Previous track| Press twice (L)| /
Next track| Press twice (R)| Press and hold for 2 seconds
| Answer a call| Press once (L/R)| Press once
Hang up| Press and hold for 2 seconds (L/R)| Press and hold for 2 seconds
Reject a call| Press and hold for 2 seconds (L/R)| Press and hold for 2
seconds
| Switch ambient sound modes (ANC / Transparency)| Press and hold for 2 seconds (L/R)| /
- You can also customize controls in the soundcore app.
AMBIENT SOUND
You can select Noise Cancellation, Normal, or Transparency mode in the soundcore app.
- Adaptive ANC: Optimize noise cancellation by adapting to the surrounding environment.
- Transparency: Stay aware of your surroundings while listening to music.
POWERING ON OR OFF
With the Charging Case
- Once connected successfully in first-time use, the earbuds will automatically reconnect to your device every time you open the charging case, as long as you haven’t deleted the pairing history from your device.
- To power off, return both earbuds to the charging case and close it.
When returning the earbuds to the charging case, make sure that you carefully align the charging contactors between the earbuds and charging case. If either earbud is successfully back into the case, the LED light strip will light up in white and then go off.
Without the Charging Case
- To power on a single earbud, press and hold the multi-function button of the corresponding earbud for 3 seconds.
- To power off a single earbud, press and hold the multi-function button of the corresponding earbud for 10 seconds.
RESET AND INDICATORS
RESET
- You might need to reset the earbuds if you experience any connectivity problems or function issues.
- Place the earbuds in the charging case and leave the case open. Press and hold the charging case button for 10 seconds until the LED light strip flashes white rapidly three times.
LED LIGHT GUIDE
FIRMWARE UPDATE
- You will be informed once a new firmware version is detected when you connect the earbuds to the app.
- Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is complete. During the update, ensure the earbuds are being charged and avoid any usage.
SPECS
Specifications are subject to change without notice.
| Input | 5V 0.45A |
|---|---|
| Output | 5V 0.3A(0.15A per port) |
| Battery capacity | 580mAh / 2.158Wh |
| Playtime (with ANC off) | 12 hours / 48 hours |
| Playtime (with ANC on) | 7 hours/ 28 hours |
| Charging time | Full Charging Time for Earbuds: 1.5 hours |
Full Charging Time for Charging Case: 3 hours
Driver unit| 11mm Dynamic Driver
Frequency response| 20-20KHz
Impedance| 16Ω
Waterproof rating (earbuds)| IP68
Bluetooth version| Bluetooth 5.3
Bluetooth range| 10m
Customer Service
- service@soundcore.com
- support.mea@soundcore.com (For Middle East and Africa Only)
- support@anker.com
- +1 (800) 988 7973 (US/Canada)
- +44 (0) 1604 936200 (UK)
- +49 (0) 69 9579 7960 (DE)
- 03 4455 7823
- +86 400 0550 036
- +82 02-1661-9246
- +971 529750842 (Middle East & Africa)
- +971 8000320817 (UAE)
- +966 8008500030 (KSA)
- +965 22069086 (Kuwait)
- +20 8000000826 (Egypt)
- +61 3 8331 4800 (Australia)
- +90 (850) 460 14 14 (Türkiye)
- +8 (800) 511-86-23 (Russia)
- +91 18003138831 (India)
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages /psti-related.