NETGEAR AXM761 Pro Safe 10GBASE-SR SFP+ LC GBIC Instruction Manual
- June 1, 2024
- NETGEAR
Table of Contents
Installation Guide
ProSafe 10 Gigabit Ethernet SFP+ Module AXM761
Install Your Optical Module
The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-
duplex 10G bps each direction for Ethernet operation on NETGEAR managed
switches.
The switch will automatically detect the AXM761, so you can simply plug it
into an available module slot.
The module can be inserted or removed while the switch is
operational.
Installing a AXM761 Module
Insert the module firmly into the slot that supports the SFP+ interface. Make
sure the optical cable you use is multi mode LC to LC duplex cable.
Removing a AXM761 Module
Release the module latch by pulling down the handle bar across the module, and
pull the module out of the module slot. 
Technical
Specifications
| Standards | IEEE 802.3ae 10GBase-SR |
|---|---|
| Wavelength | 850nm |
| Dimensions (HxWxD) | 0.46” x 0.53” x 2.19” |
(11.9 mm x 13.7 mm x 55.7 mm)
Weight| 17.1g
Operating Temperature| 32 -158º F (0 – 70ºC)
Storage Temperature| 32 -185 ºF (0 – 85ºC)
Operative relative humidity| 85% @ (25ºC)
Operating Distance| 2 – 300 m for 50/125 um MMF
2 – 33 m for 62.5/125 um MMF
Connectors| LC
Power Consumption| <1.0w
MTBF| 4,986,536 hr (569 years)
Safety Certification| UL 1950 CSA 22.2 No. 950
Environmental Compliance| -RoHS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>