Black & Decker FP2500B PowerPro Wide-Mouth 10-Cup Food Processor User Guide

Black & Decker FP2500B PowerPro Wide-Mouth 10-Cup Food Processor

Specifications

• PRODUCT DIMENSIONS: 11 x 9.63 x 16.63 inches
• ITEM WEIGHT: 8 pounds
• SPECIAL FEATURE: Interchangeable Blades
• WATTAGE: 500 watts
• BOWL CAPACITY: 10 Cups
• MATERIAL: Plastic
• VOLTAGE: 240 Volts
• BRAND: BLACK+DECKER

Introduction

This food processor allows you to quickly and arbitrarily slice, chop, shred, grate, or puree as much or as little as you like. It performs as well as it looks, thanks to a strong 500-watt motor operating beneath its svelte and robust exterior.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed, including the following

• Read all instructions.
• To protect against risk of electrical shock, do not put food processor base, cord or plug in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contacting blades and moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. Contact the consumer service number listed in this manual. This appliance has important markings on the plug blade. The attachment plug or entire cordset (if plug is molded onto cord) is not suitable for replacement. If damaged, the appliance shall be replaced.
• The use of attachments not recommended by the appliance manufacturer may cause fire, electric shock or injury.
• Do not use outdoors.
• Do not let cord hang over the edge of table or counter, or touch hot surfaces.
• Keep hands and utensils away from moving blades or discs while processing to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the processor is not running.
• Blades are sharp. Handle carefully.
• To reduce the risk of injury, never place blade or disk on base without first putting workbowl properly in place.
• Be certain the lid is securely locked in place before operating appliance.
• Never feed food by hand. Always use food pusher.
• Unit has a protection system. The unit will not operate unless the work bowl is securely locked
• Onto base and the lid is securely locked onto workbowl.
• Do not attempt to defeat the lid interlock mechanism.
• Do not use appliance for other than intended use.
• This product is designed for household use only.
• Do not open lid until blade or disk stops completely.
• The maximum rated wattage for this product was obtained with the multi-function S blade.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

SAVE THESE INSTRUCTIONS

This product is for household use only.

POLARIZED PLUG (120V Models Only)

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.

ELECTRICAL CORD

The cord of this appliance was selected to reduce the possibility of tangling in or tripping over a longer cord. If more length is needed, only extension cords having an electrical rating not less than the appliance. When using an extension cord, do not let it drape over the working area or dangle where someone could accidentally trip over it. Handle cord carefully for longer life; avoid jerking or straining it at outlet and appliance connections.

Note: If the power cord is damaged, please call our Customer Service line listed in these instructions.

Product may vary slightly from what is illustrated.

1. Food pusher (Part # 07234DZ118 [white] / 07234EZB [black]) †

2. Wide-mouth feed chute (Part # 77788)

3. Lid (Part # 77786)

4. Reversible slice/shred disc (Part # 77792-1)

5. 10-cup workbowl
   (Part # 77841(Only for Models FP2500B/FP2500S)
   Part #77842 (Only for Model FP2500)

6. Multi-function S blade (Part # 77793)

7. Base

8. Touchpad Controls

9. Cord wrap (under base)

10. Non-skid suction feet (Part # 09183-1)

11. Disc stem (Part # 77789) (not shown)

Note
Indicates consumer replaceable/removable parts

CONTROLS

The controls are located on the front of the base. Press PULSE, HIGH or LOW to select a function (see directions below). OFF/PULSE

• Processor should be stored in OFF position and unplugged when not in use.
• Use PULSE for short processing tasks. This lets you control the size and uniformity of foods being chopped.
• The OFF/PULSE button must be pressed and held for the appliance to operate in PULSE mode. When released, the appliance stops.
• The motor of the processor will run as long as the OFF/PULSE button is held down. Press the button and then release to allow the blades to stop running and the food to fall to the bottom of the workbowl.
• Pulsing gives better control when chopping, mincing, mixing and blending foods. You can control the size of the foods, from coarse to fine.

HIGH and LOW

• When either speed is selected, the processor runs continuously until the OFF/PULSE button is pressed.
• Use LOW speed when slicing or shredding.
• Use HIGH speed for chopping, mixing, or blending foods.

How to Use

This product is for household use only.

GETTING STARTED

• Remove all packing material, any stickers, and the plastic band around the power plug.

• Remove and save literature.

• Please visit www.prodprotect.com/applica to register your warranty.

• Wash all removable parts as instructed in CARE AND CLEANING section.

• CAUTION
  Handle blades and disks very carefully. They are very sharp.

• Select a level dry countertop where the appliance is to be used allowing air space on all sides to provide proper ventilation for the motor.

ASSEMBLING THE PROCESSOR Inserting / Removing Center Post

1. Turn the workbowl upside down.
2. To INSERT center post: Place post into smaller opening in bottom of workbowl and turn counterclockwise until tabs lock in place.
3. To REMOVE center post: grasp the white tabs and turn the center post clockwise until the lower tabs are free. Lift the post out.

Locking Work bowl on Base

1. Attach center post to workbowl (see above). Place the work bowl on the base with handle turned to the right of the locking mechanism
   over the unlock symbol.

2. Hold handle and rotate work bowl clockwise toward the lock symbol until it clicks firmly into place.
   Be sure to lock the work bowl in place before attaching the blades and lid.

Locking Lid to Workbowl

1. Place lid over workbowl with the small latch to the right of the workbowl’s handle.

2. Hold feed chute of lid and rotate lid clockwise until lid locks into place.
   Important: For your protection this appliance has an interlock system. The processor will not operate unless the workbowl, cover and wide-mouth feed chute are properly locked in place.

3. Place the wide-mouth feed chute on top of the lid with the small tab to the right of the workbowl’s handle. Turn clockwise until it clicks into position over the handle.

4. Insert the food pusher into the central tube of the wide-mouth feed chute. Turn clockwise to lock in place.

USING THE S BLADE

1. Attach center post to workbowl.

2. Lock workbowl onto base.

3. Hold S blade by center shaft and insert onto center post.
   Caution: Blade attachments are very sharp. Use caution when handling and storing.

4. Place food in workbowl.

5. Place lid on workbowl and lock into place by rotating clockwise.

6. Attach the wide-mouth feed chute and insert food pusher.
   Important: Never use your fingers to direct food through the chute.

7. Select your desired speed (PULSE, HIGH or LOW).
   Note : Process foods for no more than a few seconds at a time. Pulsing produces more precise results and offers greater control of end results.

8. Press the OFF/PULSE button and allow blades to stop revolving before removing lid. Twist lid toward ( ) to remove.

9. Unplug appliance.

10. Unlock workbowl by turning it counterclockwise and lift off base.
    Note: Remove bowl from appliance before removing blade to prevent food from leaking through the center opening of the bowl.

11. Carefully remove S blade.

Important: Be sure S- blade has completely stopped spinning before removing cover from processor.

USING THE SLICE/SHRED DISC

1. Attach center post to workbowl.

2. Lock workbowl into position (C and D).

3. Place disc stem onto center post in workbowl.

4. Carefully place slice/shred disc on stem with appropriate side up (depending on work to be done).

5. Place lid on workbowl and lock into place by rotating clockwise.

6. Place the wide-mouth feed chute and food pusher in place.

7. Fill feed chute with food. Select regular opening or wide-mouth, depending upon size of food to be processed. Position food pusher over food.

8. Select PULSE, HIGH or LOW; press firmly on food pusher to guide food through processor, but do not force it.
   Note
   Heavy pressure on the pusher does not speed the work; use the pusher only as a guide. Let the processor do the work.

9. When finished, press OFF/PULSE and wait for disc to stop rotating before removing lid. Twist lid toward ( ) to remove.

10. Unplug appliance.

11. Carefully remove the slice/shred disc. Unlock workbowl by turning it counterclockwise and lifting it off the base.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified service personnel.

Note: Do not attempt to sharpen the cutting edges of the blades or discs. They are permanently sharpened at the factory and will be ruined if sharpened.

CLEANING

Note: Before cleaning, be sure unit is turned off and cord is unplugged.

• Completely disassemble processor parts before washing.
• Rinse parts immediately after processing for easy cleanup.
• Wipe base and feet with a damp cloth and dry thoroughly. Do not immerse base in liquid.
• All removable parts can be washed by hand or in a dishwasher (top rack only).
• Do not use rough scouring pads or cleansers on any plastic or metal parts to clean.
• Do not allow blades or discs to soak in water for long periods of time.
• Remember to clean the internal shaft of the chopping blade; use a baby bottle brush to remove any clogged food particles.

NEED HELP?

TWO-YEAR LIMITED WARRANTY

(Applies only in the United States and Canada) For service, repair or any questions regarding your appliance, call the appropriate 800 number on cover of this book. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail product back to manufacturer, nor bring it to a service center. You may also want to consult the website listed on this manual.

What does it cover?

• Any defect in material or workmanship provided; however, Spectrum Brands, Inc.’s liability will not exceed the purchase price of product.

For how long?

• Two years from the date of original purchase with proof of such purchase.

What will we do to help you?

• Provide you with a reasonably similar replacement product that is either new or factory refurbished.

How do you get service?

• Save your receipt as proof of date of sale.
• Visit the online service website at
• prodprotect.com/applica, or call toll-fre
  • 1-800-231-9786, for general warranty service.
• If you need parts or accessories, please call
• 800-738-0245.

What does your warranty not cover?

• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province. BLACK+DECKER and the BLACK+DECKER logo are trademarks of  The Black & Decker Corporation and are used under license.  All rights reserved.

Frequently Asked Questions

How well does it chop?****

It does chop. Carrots work wonders with it. This past week, I only used the processor to make a carrot salad.

Does it cut potatoes that are raw well? We enjoy making potato chips, but it can be frustrating to slice them, especially evenly.****

I’m not sure if you’re asking if the slices are even or not, but the answer is yes. If you also need to quickly prepare hash browns.When you’re ready, rinse them in a strainer with warm to hot tap water after shredding them and adding warm tap water to the catch basin. Remove the starch, then cook them in a pan with olive oil for a delicious result.

The product is bpa-free?****

I’m not sure, but since you mostly process raw food, it shouldn’t matter.

Is it loud? Due to hand arthritis, I can’t decide between this one and Hamilton Beach. According to hb reviews, it is noisy.****

It makes noise when it operates because it is a food processor, but I wouldn’t say it is excessively loud for a unit. I do think the Hamilton Beach product is superior in terms of quality, functionality, and durability.

It kneads bread dough, right?****

In the food processor’s packaging, there is a dough blade. The dough blade cannot incorporate flour when processing very small amounts of flour because it does not reach the workbowl’s outer rim.

Is the pusher required to use this?****

We suggest placing the food pusher inside the feed chute to prevent any food from reentering the chute while being cut, shredded, or chopped.

Is there a dough blade on it?****

This blade has two. One is used for slicing and dicing, and the other is the actual blade used for cutting. A dough blade is something I have never seen, so I am unsure what it is.

Will the size of the potato slices be suitable for scalloped potatoes?****

Food processor made by Black + Decker. There is a reversible disc for slicing or shredding in this food processor. You might need to cut the potato into slightly smaller pieces, depending on the size of the slices you intend to make.

Does this have a “s” blade for chopping?****

Yes, it does; excellent device.

Does it blend similarly to a standard blender?****

It’s a food processor, though. This is not the same as a blender because they are designed differently and work better with liquids.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>