KLUS A04195 OLIS-K Profile LED Strips Instructions
- June 1, 2024
- KLUS
Table of Contents
KLUS A04195 OLIS-K Profile LED Strips
Product Specifications
-
OLIS-K Profile (Ref. C4195)
-
OLIS-90Z End cap (Ref. C24482)
-
OLIS-K-L End cap (Ref. C24480)
-
OLIS-K-P End cap (Ref. C24484)
-
OLIS-90W End cap (Ref. C24483)
-
Connecting Strip (Ref. C24009)
-
Cover BENCO-7 (Ref. 17069)
-
Connector JST-BEC (Ref. 42056)
-
Gland*
-
The full range of accessories and electronics is available at www.KlusDesign.eu
NOTE: All LED tapes must be connected to a 12 V or 24 V power supply.
IMPORTANT: Not all possible mounting procedures are presented here. More mounting procedures and related accessories can be found at www.KlusDesign.eu. Drawings in these instructions are simplified and only approximate the actual shapes.
Product Usage Instructions
Installation Steps
- Prepare the OLIS-K Profile and necessary end caps.
- Connect the Connecting Strip to the appropriate end caps as required.
- Attach the Cover BENCO-7 securely over the profile.
- Connect the LED tape to the Connector JST-BEC.
- Ensure proper connection of all components to a 12V or 24V power supply.
Maintenance
- Regularly check the connections for any loose components.
- Clean the profile and end caps with a soft, damp cloth to maintain their appearance.
- Avoid exposing the product to extreme temperatures or moisture.
Troubleshooting
- If the LED tape does not illuminate, check the power supply and connections.
- If there is flickering in the light, ensure all connections are secure and the power supply meets requirements.
FAQ
- Q: Where can I find additional mounting procedures?
- A: Additional mounting procedures and related accessories can be found at www.KlusDesign.eu.
- Q: What power supply should be used for the LED tapes?
- A: All LED tapes must be connected to a 12 V or 24 V power supply.
PARTS AND TOOLS
- OLIS-K Profile (Ref. C4195)
- OLIS-90Z End cap (Ref. C24482)
- OLIS-K-L End cap (Ref. C24480)
- OLIS-K-P End cap (Ref. C24484)
- OLIS-90W End cap (Ref. C24483)
- Connecting Strip (Ref. C24009)
- Cover BENCO-7 (Ref. 17069)
- LED tape*
- Connector JST-BEC (Ref. 42056)
- Gland*
- The full range of accessories and electronics is available at www.KlusDesign.eu
- NOTE! All LED tapes must be connected to a 12 V or 24 V power supply.
- IMPORTANT: Not all possible mounting procedures are presented here.
- More mounting procedures and related accessories can be found at www.KlusDesign.eu.
- Drawings in these instructions are simplified and only approximate the actual shapes.
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>