KLUS OLIS-K Profile Aluminium Profiles for LED Strips Installation Guide
- June 1, 2024
- KLUS
Table of Contents
OLIS-K Profile Mounting Instructions
OLIS-K Profile Aluminium Profiles for LED Strips
- OLIS-K Profile (Ref. C4195)
- OLIS-90Z End cap (Ref. C24482)
- OLIS-K-L End cap (Ref. C24480)
- OLIS-K-P End cap (Ref. C24484)
- OLIS-90W End cap (Ref. C24483)
- Connecting Strip (Ref. C24009)
- Cover BENCO-7 (Ref. 17069)
- LED tape*
- Connector JST-BEC (Ref. 42056)
- Gland*
- The full range of accessories and electronics is available at www.KlusDesign.eu
NOTE! ! All LED tapes must be connected to a 12 V or 24 V power supply.
IMPORTANT: Not all possible mounting procedures are presented here.
More mounting procedures and related accessories can be found at www.KlusDesign.eu.
Drawings in these instructions are simplified and only approximate the actual shapes.
Documents / Resources
| KLUS
OLIS-K Profile Aluminium Profiles for LED
Strips
[pdf] Installation Guide
OLIS-K, OLIS-K Profile Aluminium Profiles for LED Strips, Profile Aluminium
Profiles for LED Strips, Aluminium Profiles for LED Strips, Profiles for LED
Strips, LED Strips, Strips
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>