ANKER A1753 Portable Power Station User Guide

ANKER A1753 Portable Power Station

Specifications

• Model: Anker SOLIX C800 Portable Power Station (A1753)
• AC Recharging: 750W Max
• UltraFast Recharging: 1100W Max
• Solar Panel Recharging: 300W Max
• Car Recharging
• UPS Feature: Yes
• SurgePadTM Compatibility: Check with high-wattage devices

Product Overview

• The Anker SOLIX C800 Portable Power Station is a versatile power source that allows you to recharge and power your devices on the go.
• With multiple recharging options and various powering methods, this power station is designed to provide convenience and reliability.

Product Usage Instructions

Recharging Your Power Station

1. AC Recharging (750W Max): Connect the AC charging cable to a wall outlet to recharge the power station.
2. UltraFast Recharging (1100W Max): Activate UltraFast charging from the Anker app when needed for quick recharging. Regular charging is recommended for battery protection.
3. Solar Panel Recharging (300W Max): Connect up to two solar panels using the solar charging cable to recharge the power station with solar energy.
4. Car Recharging: Use the car charging cable to recharge the power station by connecting it to a car’s output port.

Powering On / Off

Press the main power button for 3 seconds to turn the power station on or off. When the Remaining Battery indicator appears on the LCD screen, the power station is ready to charge devices.

Powering Your Devices

• AC Charging: Press the AC outlet button and connect your device to the AC output ports. The outlets can detect if a plug is inserted and automatically turn off after 15 minutes of inactivity.
• USB Charging: Connect your devices to the USB ports for charging.
• Car Socket Charging: Turn on the car socket and connect your devices to start charging.

Uninterruptible Power Supply (UPS)

To use the UPS feature, connect the power station to a wall outlet with the AC charging cable, then connect your devices via the AC output ports for an uninterrupted power supply.

SurgePadTM

To check SurgePadTM compatibility with high-wattage devices, attempt to power them using the power station.

Anker App for Smart Control

1. Download the Anker app from the App Store (iOS) or Google Play (Android) or scan the QR code.
2. Connect your device to a network before using the app and update firmware when prompted.

What’s in the Box?

The Anker SOLIX C800 Portable Power Station comes with an AC charging cable, solar charging cable, car charging cable, and important safety instructions.

What’s in the Box

Overview

Product Overview

1. Ambient Light Button
2. Ambient Light
3. Main Power Button
4. Reset Button
5. IoT Button
6. AC Outlet Button
7. AC Output Ports
8. Car Socket Button
9. Car Socket
10. LCD Screen
11. USB Ports
12. AC Input Port
13. Overload Protection Switch
14. Solar / Car Input Port
15. Storage Compartment

LCD Screen Guide

1. Car Charging
2. USB-C Output
3. IoT:
   • Press the IoT button once to turn on Bluetooth and Wi-Fi, and connect your devices through the app when this icon appears on the screen.
   • Press the IoT button for 2 seconds to turn off Bluetooth and Wi-Fi.
   • Press the IoT button for 7 seconds to reset Bluetooth and Wi-Fi.
4. Low-Temperature Alert: When this icon shows, stop using the power station until the icon disappears.
5. Overload Warning:
   • This icon appears when a port is overloaded. The port will be turned off to avoid any damage. Please remove the device causing overload.
6. High-Temperature Alert:
   • When this icon shows, stop using the power station and let it cool down until the icon disappears.
7. USB-A Output
8. AC Charge and Voltage Frequency
9. Remaining Battery for Power Station
10. Estimated Time to Fully Recharge
11. Estimated Time for Battery to Deplete
12. Current Input Power
13. Current Output Power

Recharging Your Power Station

AC Recharging (750W Max)

Recharge your power station by connecting to a wall outlet with the AC charging cable.

UltraFast Recharging (1100W Max)

• The UltraFast charging needs to be activated from the Anker app home page.
• Regular charging provides the best protection for the battery. We recommend using UltraFast charging when necessary.

Solar Panel Recharging (300W Max)

• Recharge your power station with a maximum solar input of 300W by connecting up to two solar panels, as shown in the figure, with a solar charging cable.

Car Recharging

• Recharge your power station by connecting to a car’s output port with the car charging cable.
• When your portable power station only has 1% battery remaining, the “Remaining Battery” indicator will flicker to remind you to recharge.

Powering On / Off

• Press the main power button for 3 seconds to turn your power station on or off.
• When the “Remaining Battery” indicator shows on the LCD screen, your power station is ready to charge devices.
• When powered on, press the main power button to turn the screen on or off.
• The screen will automatically turn off after 30 seconds of lighting up. The auto-off time can be set in the Anker app.
• The power station will power off automatically if the output buttons are turned off and no power loads are detected for 12 hours. The standby duration can be set in the Anker app.

Powering Your Devices

AC Charging

• Press the AC outlet button and connect your device to the AC output ports.
• The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power waste by automatically turning off the power station if no plug is detected for more than 15 minutes.

USB Charging

• Connect your devices to the USB ports.

Car Socket Charging

• Turn on the car socket and connect your devices to start charging.

Uninterruptible Power Supply (UPS)

• To use the UPS feature, connect your power station to a wall outlet with the AC charging cable, then press the AC outlet button and connect your devices via the AC output ports.

SurgePad™

• Using the SurgePad™ feature, the power station can power high-wattage devices up to 1600W without overload.
• SurgePad™ automatically turns on when the total output exceeds the rated output, allowing the power station to deliver rated power to high-wattage devices.
• SurgePad™ does not function in bypass mode (when the power station is being charged with the AC output on).
• SurgePad™ works better with devices that generate heat but do not support precision instruments and other devices that have voltage protection or strict voltage requirements.
• To see if SurgePad™ works with your high-wattage devices, try powering them with the power station.

Anker App for Smart Control

You can remotely control your power station using the Anker app.

1. Download the Anker app from the App Store (iOS devices) or Google Play (Android devices), or by scanning the QR code.
2. Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your device off-grid.
3. Firmware update: You will be informed once a new firmware version is detected when you connect the power station to the app. During the update, ensure the power station is AC charged and connected to Wi-Fi.

Light

Ambient light

• Press the button once to turn on the ambient light, and press again up to 2 times to switch between brightness levels.

SOS Mode

• Hold the button for 2 seconds to turn on SOS mode.

FAQ

What is the maximum power output of the AC output ports?

The AC output ports can deliver a maximum of 1200W rated power to connected devices.

What should I do when using a solar charger to charge my power station?

The solar input supports an 11-60V solar charger with an XT-60 connector. The supported current is 10A max. We recommend using Anker solar panels (200W or 400W) to get the best compatibility.

Can the USB-C ports charge the power station input only or are they output only?

The USB-C ports support output only.

What should I do when AC recharging fails?

If AC recharging does not work, check if the overload protection switch is turned on. If it is on, press down to reset and then continue recharging.

How do I reset my power station?

If your power station is not working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the power station still doesn’t work, please contact support@anker.com.

Why is the power station not working after it hasn’t been used for a long time?

If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This often leads to poor conductivity and a reduced battery lifespan that causes the battery not to work.

How should I store and maintain the power station?

When storing your power station, please make sure that you:

1. Turn off the main power button.
2. Store the power station in a dry and cool environment.
3. Check the remaining battery capacity each week. If the battery level is below 30%, fully charge the power station. Do not forget to charge it to 100% once every 3 months.

Specifications

Anker SOLIX C800 Portable Power Station

• Scan for online support
• Scan to download the Anker app
• support@anker.com
• support.mea@anker.com
• (For Middle East and Africa Only)
• CED-CN@anker.com
• Attention
  • Not permitted on aircraft.

IMPORTANT SAFETY INSTRUCTIONS

• WARNING – When using this product, basic precautions should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put your fingers or hands into the product.
• Do not expose the product to rain or snow.
• Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric shock, or injury.
• To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product.
• Do not use the product over its output rating. Overloading outputs above the rating may result in a risk of fire or injury.
• Do not use the product or attachment that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not operate the product with a damaged cord, plug, or output cable.
• Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
• Do not expose the product to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause explosions.
• To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
• When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
• Do not clean the product with harmful chemicals or detergents.
• Misuse, dropping, or excessive force may cause product damage.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
• Do not use or store the power station in direct sunlight for a long period, such as in a car, cargo bed, or any other place where it will be exposed to high temperatures. Doing so may cause the product to malfunction, deteriorate, or generate heat.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Risk of Electric Shock. Never use a power pack to supply power tools to cut or access live parts or live wirings, or materials that may contain live parts or live wirings inside, such as building walls, etc.
• CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting off a battery, can result in an explosion.
• Leaving a battery in an extremely high-temperature environment can result in an explosion or leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.
• Unplug the AC power cable to disconnect from the line voltage.
• Do not use this product to charge non-rechargeable batteries.
• This appliance contains batteries that are only replaceable by skilled persons.

WARNING: GROUNDING INSTRUCTIONS

• This product must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock.
• This product is equipped with a cord with an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded by all local codes and ordinances.
• WARNING – Improper connection of the equipment grounding conductor may result in an electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded.
• Do not modify the plug provided with the product. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.

Storage and Maintenance Instructions

1. Store the product between 32°F-104°F (0°C-40°C). Avoid exposing the product to rain or using the product in a humid environment.
2. To preserve the battery lifespan, charge to 100% after use. If you plan to store your power station, recharge it to 100% every 3 months.

Keep the product on a flat surface when using, charging, and storing.

SAVE THESE INSTRUCTIONS

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party.

• Company Name: Fantasia Trading LLC
• Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
• Telephone: +1-800-988-7973

RF Exposure Compliance Statement

• This equipment complies with the FCC/IC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

IC Statement

This device complies with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s) Operation is subject to the following two conditions:

1. This device may not cause interference
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device complies with RF field strength limits. Users can obtain Canadian information on RF exposure and compliance.

• This Class B digital apparatus complies with Canadian ICES-003.
• Anker Innovations Limited I Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong

Waste Electrical and Electronic Equipment (WEEE)

• This symbol (with or without a solid bar) means that, according to local laws and regulations, your product and/or its battery should be disposed of separately from household waste.
• When this product reaches the end of its life, the user has the option of handing it over to a competent recycling organization. Proper recycling of your product will protect human health and the environment.
• The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license.
• Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>