Keeley Mk3-Driver Andy Timmons Full Range Overdrive Padel User Manual

June 1, 2024
KEELEY

Keeley Mk3-Driver Andy Timmons Full Range Overdrive Padel

Keeley-Mk3-Driver-Andy-Timmons-Full-Range-Overdrive-Padel-
product

CONTROLS AND FEATURES

  • UITGANG (OUTPUT)
    • A connection point for the output signal.
  • INGANG (INPUT)
    • A connection point for the input signal.
  • TOONREGELINGSSECTIE (TONE CONTROL SECTION)
    • HIGH PASS
    • FULL RANGE
  • DRIVE
    • A knob to control the amount of drive.
  • LEVEL
    • A knob to control the output level.
  • CLIPPINGSTIJL (CLIPPING STYLE)
    • SILICONEN-LED (SILICON-LED) GERMANIUM
  • TRUE BYPASS / VERBONDEN VOETSCHAKELAAR (CONNECTED FOOTSWITCH)
    • To change modes, hold the footswitch for 2 seconds. The LED will blink twice for true bypass and three times for buffered bypass. Factory setting is buffered bypass.

Specifications

Power Supply 9 – 18 VDC
Current Draw 27 mA
Tone Controls High Pass, Full Range
Clipping Style Silicon-LED, Germanium
Bypass Type True Bypass, Buffered Bypass (Default)

Product Overview

Keeley-Mk3-Driver-Andy-Timmons-Full-Range-Overdrive-Padel-
fig-4

TO CHANGE MODES: HOLD FOOTSWITCH FOR 2 SECONDS LED FLASHES 2X FOR TRUE BYPASS AND 3X FOR BUFFERED BYPASS*

EQ Curve and Clipping Diagrams **

Keeley-Mk3-Driver-Andy-Timmons-Full-
Range-Overdrive-Padel-fig-2Keeley-
Mk3-Driver-Andy-Timmons-Full-Range-Overdrive-Padel-fig-3**

The EQ Curve section shows two graphs demonstrating the tonal differences between the AT (Silicon) and RK (Germanium) settings. The Clipping section shows the electronic diagrams for Silicon (Si) and Germanium (Ge) clipping.

Recommended Settings

The image provides visual representations of knob positions for various settings including “Nocturnal Clean,” “Doctor Robert,” “Outlier Boost,” and “Frank Fuzz.”

FAQ

How do I switch between the true bypass and buffered bypass?

Hold the footswitch for 2 seconds. The LED will indicate the mode by blinking.

What power supply should be used with the Mk3 DRIVER?

A 9 - 18 VDC power supply with a current draw of 27 mA.

Can the clipping style be adjusted?

Yes, you can choose between Silicon-LED and Germanium clipping styles.

What are the factory default settings?

The factory default setting is buffered bypass.

Scan

Keeley-Mk3-Driver-Andy-Timmons-Full-Range-Overdrive-Padel-
fig-1

Documents / Resources

| Keeley Mk3-Driver Andy Timmons Full Range Overdrive Padel [pdf] User Manual
Mk3-Driver Andy Timmons Full Range Overdrive Padel, Mk3-Driver, Andy Timmons Full Range Overdrive Padel, Timmons Full Range Overdrive Padel, Full Range Overdrive Padel, Range Overdrive Padel, Overdrive Padel, Padel
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals