nVent 20838-274 Front Panel Kit User Manual
- October 30, 2023
- nVent
Table of Contents
nVent 20838-274 Front Panel Kit
Product Information: Front Panel Bottom-Hinged
The front panel of this product is designed to be bottom-hinged, allowing for easy access to the interior components. The product comes with various screws and bolts, including Torx M 2.5 x 5 and M 2.5 x 12,3, for installation and assembly. The product is compatible with europac PRO, ratiopac PRO, compact PRO, and propac PRO enclosures.
Product Usage Instructions
- Begin by identifying the correct enclosure for your product: europac PRO, ratiopac PRO, compact PRO, or Propac PRO.
- Using the appropriate screws and bolts provided, attach the front panel to the bottom hinge of the enclosure.
- If necessary, use additional screws and bolts to secure the front panel to the sides of the enclosure.
- To access the interior components of the product, simply lift the front panel up from the bottom hinge.
Note: Make sure to follow the torque specifications provided in the user manual when tightening screws and bolts. Also, please note that some components may not be included in the product package. Refer to the user manual for more information.
Package Content
Installation Instructions
Schroff GmbH www.nvent/schroff.com. Langenalber Straße 96 – 100 D-75334 Straubenhardt Telefon: +49(0)70 82 7 94-0 Telefax: +49(0)70 82 7 94 200
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>