SteelSeries Aerox 3 Ultra Lightweight Gaming Mouse Installation Guide

June 3, 2024
SteelSeries

SteelSeries-logo

SteelSeries Aerox 3 Ultra Lightweight Gaming Mouse

SteelSeries-Aerox-3-Ultra-Lightweight-Gaming-Mouse-product-
image

WELCOME TO AEROX 3

Your new mouse is the result of our unyielding pursuit of perfection for over 20 years. We poured our hearts into creating the best possible ultra lightweight gaming mouse, optimizing it for speed and performance. The SteelSeries Aerox 3 is engineered to get the fastest swipes, so you can beat the competition to the trigger. When milliseconds count, speed matters.

STEELSERIES ENGINE

SteelSeries-Aerox-3-Ultra-Lightweight-Gaming-Mouse-01

To enjoy GameSense integration, program macros, and customize lighting effects and other mouse settings on your new Aerox 3 Wireless mouse, download SteelSeries Engine at steelseries.com/engine

PACKAGE CONTENTS
  • Aerox 3 Wireless Mouse
  • USB Type-C to USB Type-A Super Mesh Data/Charging Cable (5’9”/1,8 m)
  • USB Type-C Wireless Dongle Extension Adapter
  • Product Information Guide

S YSTEM REQUIREMENTS / COMPATIBILITY

  • PC
  • Mac
  • Xbox

STEELSERIES ENGINE SOFTWARE REQUIREMENTS

  • Platforms
    Windows 7+
    Mac OS X 10.13+

160 MB of free hard drive space for installation

PRODUCT OVERVIEW

  1. Left Trigger

  2. Right Trigger

  3. Scroll Wheel

  4. CPI Button

  5. Side Button 1

  6. Side Button 2

  7. Virgin-grade PTFE Feet

  8. Wireless Mode Switch

  9. TrueMove Air Sensor

  10. USB Type-C to USB Type-A
    Super Mesh Data/Charging Cable

  11. USB Type-C Wireless Dongle

  12. Extension A

SETUP

CONNECTING VIA
2.4 GHZ WIRELESS

  1. Connect the Aerox 3 Wireless
    Dongle 11 to an available USB port on your device.

  2. Toggle the Wireless Mode
    Switch 8 to the “2.4 GHz” position.

  3. The mouse and dongle will automatically pair.

  4. To further customize your mouse, or re-pair a Wireless Dongle 11 , download the SteelSeries Engine software from steelseries.com/engine

PAIRING VIA
BLUETOOTH

  1. Initiate Bluetooth pairing mode on your Bluetooth 5.0 or higher enabled device.

  2. Hold the CPI Button 4 and toggle the Wireless Mode
    Switch 8 to the Bluetooth position to turn on your mouse.

  3. The Mouse lighting will start blinking blue when searching for a connection.

  4. Select “Aerox 3 Wireless” on your Bluetooth-enabled device.

BATTERY LEVEL INDICATOR

The mouse lighting will flash yellow to notify you about battery life:

  • 5 minute intervals
  • 2 hours of battery remaining
  • 2 minute intervals
  • 1.5 hours of battery remaining
  • 1 minute interval
  • 1 hour of battery remaining

When charging, the lighting will flash green for 10 seconds, before resuming default lighting.

REGULATORY

Europe – EU Declaration of Conformity

Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: steelseries.com
SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.
Operating Temperature: 0 to + 40°C.
Frequency bands and Powers (Mouse and Transceiver)

  • Frequency band(s) in which the radio equipment operates:
    • WIFI: 2.400 – 2.4835 GHz
  •  Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
    • EIRP(2.4G): л/4-DQPSK: 3.17 dBm (Mouse)
    • EIRP(BT): GFSK: 3.29 dBm (Mouse)
    • EIRP(2.4G): л/4-DQPSK: 0.91 dBm (Transceiver)
  • Firmware Version: V1.5.9 (Mouse); V1.2.7 (Transceiver)

UK Declaration of Conformity
Hereby, SteelSeries ApS. declares that the following equipment which is compliance with Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy.
The full text of the UK declaration of conformity is available at the following internet address: https://steelseries.com/

WEEE
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.

TURKEY ROHS COMPLIANCE
Republic of Turkey: In conformity with the EEE Regulation

Safety Guideline for the Battery

This battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction.
FCC ID: ZHK-M00019 (Mouse)
FCC ID: ZHK-M00019TX(Transceiver)
Frequency bands and Powers (Mouse and Transceiver)

  • Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
  • Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
    • Conducted Average Power/(2.4G): л/4-DQPSK: -1.0 dBm (Mouse)
    • Conducted Average Power/(BT): GFSK: -0.95 dBm (Mouse)
    • Conducted Average Power/(2.4G): л/4-DQPSK: -2.32 dBm (Transceiver)
  • Firmware Version: V1.5.9 (Mouse); V1.2.7 (Transceiver)

Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.

“CAUTION!”
RISK OF EXPLOSION IF BATTERY PACK IS NOT REPLACE BY SAME TYPE AS SPECIFIED BY THE MANUFACTURER.
Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.

  1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
  2. Please keep this battery pack away from fire and high heat sources due to the explosion that might happen. Do not place your battery pack close to any heater or hot location.
  3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
  4. This battery pack shall not be exposed to moisture, dripping or splashing.
  5. If any electrolyte flows out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.

Region           Address    Telephone
Asia
4F.-4, No. 186, Jian 1st Rd., Zhonghe Dist., New Taipei
City 235603, Taiwan
+886 2 8227 1999

Europe
Havneholmen 8, 1st Floor,
2450 Copenhagen SV, Denmark
+45 702 500 75

USA
656 W Randolph St., Suite 3E,
Chicago, IL 60661, USA
+1 312 258 9467

More information and support at steelseries.com

Product Name: Wireless Mouse
Model No: M-00019
Rated: 5 V 400 mA

Accessories information
Product Name: : Transceiver
Model No. : M-00019TX
Rated : 5 V 30 mA
Made in China
Operating Temperature: 0 to + 40 °C

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals