steelseries RIVAL 600 Gaming Mouse User Manual

RIVAL 600
PRODUCT INFORMATION GUIDE

RIVAL 600 Gaming Mouse

WELCOME TO RIVAL 600
The Rival 600 gaming mouse combines true 1 to 1 tracking with an advanced dual-optical sensor system that enables precise liftoff distance calibration. Plus, 256 weight combinations enable you to custom-tune the perfect balance. Like you, we are esports pros, pubstars, 5am raiders, 1hp heroes, streamers and dreamers. Your Rival 600 was forged out of our belief that gaming isn’t your way to escape reality, it’s your path to rewrite it.

STEELSERIES ENGINE

To enjoy GameSense integration, custom lighting effects, customization of mouse settings, as well as programming macros on your new Rival 600 mouse, download SteelSeries Engine at steelseries.com/engine

PRODUCT OVERVIEW

1. Removable Cable *

2. Split Trigger Design
   Main Mouse Buttons

3. Scroll Wheel

4. CPI Button /
   Lift Off Calibration

5. Removable Side Panels with Rubber Side Grips *

6. Side Buttons

7. PTFE Feet

8. Dedicated Lift Off Sensor

9. TrueMove3 Sensor

10. Weight Molds

11. Weights Box

12. Weights (8x 3.75 g)
    

SETUP

HARDWARE INSTALLATION

CONFIGURING WEIGHT SYSTEM

1. Remove the side panels 05 to access the weight molds
2. Choose your desired weights 12 and insert them into the dedicated molds 10
3. Re-attach side panels 05 once the desired weight is calibrated. If you find it not to your liking, repeat steps 01 to 03
   

CALIBRATION OF LIFT OFF SENSOR

Your Rival 600 is equipped with a secondary, high precision lift off sensor. To ensure the highest level of accuracy, the lift off sensor must be calibrated to your gaming surface of choice.
By default your Rival 600 is set to a ≤ 1.0 mm lift off distance. SteelSeries Engine offers theability to further tweak the lift off distance. Calibration of the lift off sensor can happen intwo ways: Automatic On every mouse power up (for instance, plugging in the USB cable), your lift off sensorwill automatically calibrate.

Manual
If you change gaming surfaces it is recommended to recalibrate the lift off sensor.
To manually calibrate the lift off sensor, hold down the CPI button 04 for two seconds to force recalibration. Your Rival 600 will flash white three times when lift off calibration is complete.

REGULATORY

Europe – EU Declaration of Conformity
** Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU),
R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/
SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.
UK Declaration of Conformity**
Hereby, SteelSeries ApS. declares that the following equipment which is compliance with Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy.
The full text of the UK declaration of conformity is available at the following internet address: www.steelseries.com

WEEE
** This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Restriction on Hazardous Substances statement (India)
** This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-003.
The RoHS test method is based on the standards JIS C 0950 and CNS 15663

Equipment name: Mouse Type designation: M-00009

Unit| Restricted substances and its chemical symbols
Lead
(Pb)| Mercury
(Hg)| Cadmium
(Cd)| chromium
(Cr+6)| Polybrominated
biphenyls
(PBB)| Polybrominated
diphenyl ethers
(PBDE)
Plastic| 0| 0| 0| 0| 0| 0
PCBA| —| 0| 0| 0| 0| 0
Wheel| —| 0| 0| 0| 0| 0
Internal Cable| —| 0| 0| 0| 0| 0
External Cable| —| 0| 0| 0| 0| 0
Note 1: “Exceeding 0.1 wt 96″ and ‘exceeding 0.01 wt 96” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: 0 indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: — indicates that the restricted substance corresponds to the exemption

Custom Union Compliance.
ACMA Compliance (Australia/ New-Zealand)
Direct Current

1. SteelSeries ApS.
2. Mouse
3. M-00009
4. MSIP-REM-SS4-M-00009
5. SteelSeries ApS./Taiwan

More information and support from https://steelseries.com/
Product Name : Mouse
Model No : M-00009
Rated : 5V 200mA
Made in China
Operating Temperature: 0 to + 40 ° C
Points de collecte sur www.quefairedemesdechets.fr

learn more atsteelseries.com
find help at support.steelseries.com

References

• Official Site - For Glory | SteelSeries
• Official Site - For Glory | SteelSeries
• Engine | SteelSeries
• Gaming Accessories | SteelSeries
• Official Site - For Glory | SteelSeries
• Official Site - For Glory | SteelSeries

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>