steelseries Aerox 3 Wireless 2022 Edition Ultra Lightweight Gaming Mouse User Guide

Aerox 3 Wireless 2022 Edition Ultra Lightweight Gaming Mouse
User Guide

AEROX 3 WIRELESS
PRODUCT INFORMATION GUIDE

Aerox 3 Wireless 2022 Edition Ultra Lightweight Gaming Mouse

WELCOME TO AEROX 3
Your new mouse is the result of our unyielding pursuit of perfection for over 20 years. We poured our hearts into creating the best possible ultra lightweight gaming mouse, optimizing it for speed and performance. The SteelSeries Aerox 3 is engineered to get the fastest swipes, so you can beat the competition to the trigger. When milliseconds count, speed matters.

STEELSERIES ENGINE

To enjoy GameSense integration, program macros, and customize lighting effects and other mouse settings on your new Aerox 3 Wireless mouse, download SteelSeries Engine at steelseries.com/engine 

PACKAGE CONTENTS

Aerox 3 Wireless Mouse
USB Type-C to USB Type-A Super
Mesh Data/Charging Cable (5’9”/1,8 m)
USB Type-C Wireless Dongle
Extension Adapter
Product Information Guide

SYSTEM REQUIREMENTS / COMPATIBILITY
PC………….
Mac………………..
Xbox…………………..
STEELSERIES ENGINE SOFTWARE REQUIREMENTS
Platforms……………….
Windows 7+…………….
Mac OS X 10.13+……………………
160 MB of free hard drive space for installation

PRODUCT OVERVIEW

1. Left Trigger

2. Right Trigger

3. Scroll Wheel

4. CPI Button

5. Side Button 1

6. Side Button 2
   Find accessories and replacement parts at steelseries.com/gaming- accessories

7. Virgin-grade PTFE Feet

8. Wireless Mode Switch

9. TrueMove Air Sensor

10. USB Type-C to USB Type-A Super Mesh Data/Charging Cable

11. USB Type-C Wireless Dongle

12.  Extension Adapter

SETUP

CONNECTING VIA 2.4 GHZ WIRELESS

1. Connect the Aerox 3 Wireless Dongle 11 to an available USB port on your device.
2. Toggle the Wireless Mode Switch 8 to the “2.4 GHz” position.
3. The mouse and dongle will automatically pair.
4. To further customize your mouse, or re-pair a Wireless Dongle 11 , download the SteelSeries Engine software from steelseries.com/engine

PAIRING VIA BLUETOOTH

1. Initiate Bluetooth pairing mode on your Bluetooth 5.0 or higher enabled device.
2. Hold the CPI Button 4 and toggle the Wireless Mode Switch 8 to the Bluetooth position to turn on your mouse.
3. The Mouse lighting will start blinking blue when searching for a connection.
4. Select “Aerox 3 Wireless” on your Bluetooth-enabled device.

The mouse lighting will flash  yellow to notify you about battery life:

| minute intervals| 2| hours of battery remaining
---|---|---|---
| minute intervals| 1.5| hours of battery remaining
| minute interval| 1| hour of battery remaining

When charging, the lighting will flash green for 10 seconds, before resuming default lighting.

REGULATORY

Europe – EU Declaration of Conformity
Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/ EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: steelseries.com
SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.
Operating Temperature: 0 to + 40° C.
Frequency bands and Powers (Mouse and Transceiver)
a. Frequency band(s) in which the radio equipment operates:

• WIFI: 2.400 – 2.4835 GHz

b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:

• EIRP(2.4G): л/4-DQPSK: 3.17 dBm (Mouse)
• EIRP(BT): GFSK: 3.29 dBm (Mouse)
• EIRP(2.4G): л/4-DQPSK: 0.91 dBm (Transceiver)

c. Firmware Version: V1.5.9 (Mouse); V1.2.7 (Transceiver)

UK Declaration of Conformity
Hereby, SteelSeries ApS. declares that the following equipment which is compliance with Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy.
The full text of the UK declaration of conformity is available at the following internet address: https://steelseries.com/
WEEE
This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
TURKEY ROHS COMPLIANCE
Republic of Turkey: In conformity with the EEE Regulation Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Safety Guideline for the Battery
This battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction.
FCC ID: ZHK-M00019 (Mouse)
FCC ID: ZHK-M00019TX(Transceiver)
Frequency bands and Powers (Mouse and Transceiver)
a. Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
• Conducted Average Power/(2.4G): л/4-DQPSK: -1.0 dBm (Mouse)
• Conducted Average Power/(BT): GFSK: -0.95 dBm (Mouse)
• Conducted Average Power/(2.4G): л/4-DQPSK: -2.32 dBm (Transceiver)
c. Firmware Version: V1.5.9 (Mouse); V1.2.7 (Transceiver)

Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.
The County Code Selection feature is disabled for products marketed in the US/ Canada.
The appliance must not be exposed to splashes or drops of water and it should not be used as a support for any object filled with liquid, such as a vase.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.
“CAUTION!”
RISK OF EXPLOSION IF BATTERY PACK IS NOT REPLACE BY SAME TYPE AS SPECIFIED BY THE MANUFACTURER.
Please keep follow all listed important warnings and cautions below while using this battery pack to avoid any damage or hazard.

1. The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
2. Please keep this battery pack away from fire and high heat sources due to the explosion that might happen. Do not place your battery pack close to any heater or hot location.
3. This battery pack shall not be hit or impacted. This battery pack shall not be dealt with any sharp or keen objects either.
4. This battery pack shall not be exposed to moisture, dripping or splashing.
5. If any electrolyte flows out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.

SteelSeries Products and Australian Consumer Law
Our goods come with guarantees that cannot be excluded under Australian consumer law. You are entitled to a repair, replacement, or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Should your product be defective, you can make a claim under Australian consumer law.
SteelSeries will provide its own remedies equivalent to those remedies in the consumer guarantee provisions of the Australian Consumer Law at any time within 24 months of the date of purchase. For the avoidance of doubt, SteelSeries acknowledges that the Australian Consumer Law may provide for remedies beyond 24 months for a number of its products. Summary of Australian statutory consumer guarantees Consumer guarantees in relation to goods The goods will be of acceptable quality, The goods will be fit for a particular purpose, The goods will match their description, The goods will match the sample or demonstration model, You have title to the goods, You have undisturbed possession of the goods, There are no undisclosed securities on the goods.
Consumer guarantees in relation to services
We will provide the services with due care and skill, The services will be fit for a particular purpose, The services will be provided within a reasonable time.
For SteelSeries-branded goods, in addition to the above, we also guarantee that we will provide repairs or spare parts for a reasonable time. Under Australian consumer law, the remedy you are entitled to if a product fails to meet a consumer guarantee will depend on whether the failure to comply with the guarantee is major or minor.
Minor failures to comply with a consumer guarantee can normally be fixed or resolved in a reasonable amount of time. In this case, the seller can choose to offer you a refund, replacement, repair or, in the case of services, resupply. If the seller does not fix the problem or takes too long, you may be able to get it fixed by someone else and recover the costs from the seller depending on the circumstances.
Remedies for major failure with goods
Return the product and ask for a refund, Return the product and ask for an identical replacement, or one of similar value if reasonably available, Keep the product and ask for compensation for the drop in value caused by the problem.
Remedies for major failure with services
Cancel the contract and pay a reasonable amount for the work done, or seek a refund, For money already paid, keep the contract and negotiate a reduced price for the drop in value of the service — this may mean asking for some of your money back if you have already paid.
For goods, there is a major failure to comply with a consumer guarantee when:

• You would not have purchased the product if you had known about the problem.
• The product is significantly different from the description, sample or demonstration model you were shown.
• The product is substantially unfit for its normal purpose and cannot easily be made fit within a reasonable time.
• The product is substantially unfit for a purpose that you told the supplier about, and cannot easily be made fit within a reasonable time.
• The product is unsafe.

For services, there is a major failure to comply with a consumer guarantee when:

• You would not have engaged the service if you had known the nature and extent of the problem.
• The service does not meet the reasonable expectations for that type of service, and the problem cannot be rectified within a reasonable time.
• You told the supplier that you wanted the service for a specific purpose, which was not fulfilled, and the problem could not be easily rectified within a reasonable time.
• You told the supplier that you wanted a specific result, yet the service and end result failed to meet your specifications and could not be easily rectified within a reasonable time.
• The supply of the service has created an unsafe situation.

For information on Australian consumer laws, please visit Australian consumer law website at www.consumerlaw.gov.au.
Importer Name and Address: Ingram Micro Pty LTD / Level1, 61 Dunning Avenue. Rosebery NSW 2018
Telephone technical support: +61-2-9381-6000
The RoHS test method is based on the standards JIS C 0950 and CNS 15663.

tafAVA: AW34tEict a (): M-00019
Equipment name: Wireless Mouse Type designation: M-00019

Unit| RMIOARIUMMga
Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent
chromium (Cr+6)| Polybrominated
biphenyls (PBB)| Polybrominated
diphenyl ethers (PBDE)
Plastic| 0| 0| 0| 0| 0| 0
PCBA| –| 0| 0| 0| 0| 0
Cables| –| 0| 0| 0| 0| 0
Metal| –| 0| 0| 0| 0| 0

Note 1： “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: O indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3： – indicates that the restricted substance corresponds to the exemption

More information and support at steelseries.com
Product Name……………Wireless Mouse
Model No. ………………M-00019
Rated………………………5 V 400 mA
Made in China……..
Accessories information

Product Name: …………..Transceiver
Model No…………………….M-00019TX
Rated :………………………..5 V 30 mA

New Zealand)
Complies with IMDA Standards DA 106032| Singapore approval (IMDA)
****| Custom Union Compliance.
(Russia / Belarus / Kazakhstan/Armenia/Kyrgyzstan)
| Direct current

learn more at steelseries.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>