Steelseries ARCTIS 7 Wireless Gaming Headset User Manual
- October 30, 2023
- SteelSeries
Table of Contents
Steelseries ARCTIS 7 Wireless Gaming Headset User Manual
STEELSERIES ENGINE
To enjoy DTS Headphone:X 7.1, and custom audio effects on your new Arctis 7
headset, download SteelSeries Engine at
steelseries.com/engine
WELCOME TO ARCTIS
Your new headset is the result of more than 15 years of gaming expertise and
our unyielding pursuit of perfection. We poured our hearts into making your
new Arctis, giving it the best gaming mic available, 7.1 surround sound and
comfort and style unlike anything you’ve experienced before.
PACKAGE CONTENTS
- Product Information Guide Arctis Card
- Headset
- Wireless Transmitter
- Mobile / Console Cable Micro-USB Charging Cable
SOFTWARE REQUIREMENTS
Platforms:
- Windows 7 – Windows 10
- Mac OS X 10.8 – 10.11
- 120 MB of free hard drive space for installation
SYSTEM COMPATIBILITY
- PC / MAC / MOBILE /
- PS4 / XBOX ONE / VR
DTS Headphone
X 7.1 is available for Windows 7-10 only. Software installation required
PRODUCT OVERVIEW
selected accessories available at steelseries.com
- Ski Goggle Headband
- Mobile / Console Cable
- Wireless Transmitter
- Micro-USB Charging Cable
- Airweave Ear Cushion
- Retractable Microphone
- Microphone Mute Button
- Volume Control
- Mobile Cable Jack
- Headphone Share Jack
- Micro-USB Charging Jack
- ChatMix Dial
- Power Button
SETUP
Find help at support.steelseries.com
CHARGING
To charge the headset connect the micro-USB cable to the charging port on the
headset, and plug the other end into any USB power source.
The color of the power button indicates the battery level.
- Green = 100-50%
- Yellow = 49-20%
- Red = 19-10%
- Red (fast blink) = 9-1%
POWER ON / OFF
find help at support.steelseries.com
- To power on the headset press and hold the power button for at least 3 seconds. You will hear a tone, and the power button will illuminate.
- To power off the headset press and hold the power button for at least 3 seconds
PAIRING
The headset is already paired to the transmitter when it arrives.
-
e -1
Press and hold the transmitter pairing button for 5 seconds until the LED begins blinking rapidly -
e -2
With the headset off, press and hold the power button for 6 seconds.
LINE IN / LINE OUT
find help at support.steelseries.com
When headset is off, audio can be sent to speakers via Line Out. When headset is powered on Line Out is automatically muted.
MICROPHONE
Position the microphone close to the corner of your mouth with the flat surface facing you
SKI GOGGLE HEADBAND
SYSTEM SETTING: WINDOWS
- Go to Sound Settings
- Under ‘Playback’ highlight Arctis 7 Game Audio and select ‘Set Default’
- Under ’Recording’ highlight Arctis 7 Microphone and select ‘Set Default’
- In your VoIP (chat) application select Arctis 7 Chat Audio as the default audio device
SYSTEM SETTING: MAC
- Go to System Preferences > Sound
- Under ‘Output’ select Arctis 7 Game Audio
- Under ‘Input’ select Arctis 7 Microphone
- In your VoIP (chat) application select Arctis 7 Chat Audio as the default audio device
Europe – EU Declaration of Conformity
Products with CE marking complies with the R&TTE Directive (99/5/EC) and R.E.D (2014/53/EU), the EMC Directive (2004/108/EC; 2014/30/EU), and the Low Voltage Directive(2006/95/EC;2014/35/EU) issued by the Commission of the European Community.
Safety of Information Technology Equipment
Assessment of electronic and electrical equipment related to human exposure
restrictions for electromagnetic fields (0 Hz-300 GHz) Electromagnetic
compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using spread
spectrum modulation techniques; Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive Electromagnetic compatibility and
Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 17: Specific conditions for 2,4 GHz
wideband transmission systems and 5 GHz high performance RLAN equipment
Electromagnetic compatibility and Radio Spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements The product is EEE product and contained
in the Li-Ion Battery Cell. This product must not be disposed of with your
other household waste or treat them in compliance with the local regulations
or contact your local city office, your household waste disposal service or
the shop where you purchased the product.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5GHz products are restricted to indoor usage only.
Industry Canada Statement
This device complies with RSS-247 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Taiwan: For better environmental protection, waste batteries should be
collected separately for recycling or special disposal.
This product is compliant with requirements of Circular No. 30/2011/TT-BCT
Regulations “STIPULATING TEMPORARILY THE PERMISSIBLE CONTENT LIMITATION OF
SOME TOXIC CHEMICALS IN THE ELECTRONIC, ELECTRICAL PRODUCTS“ PCBA consisted of
bare printed circuit board, soldering and its surface-mounted elements, such
as resistors, capacitors, arrays, connectors, chips, etc.
NOTE1: The “O“ indicates taht the percentage content of the substance to
be calculated is not exceeding the reference percentage content.
NOTE 2: The “Exempted‘ item means that the specified chemical substance
corresponds to the items exempted by the standard of JIS C 0950.
Coarse
Classificatior,
| Chemical Substance Table
---|---
Pb| Hg| Cd| Cr6+| PBBs| PBDEs
Plastic| | | | | |
PCBA| Exempted| | | | |
Cable| Exempted| | | | |
PCBA consisted of bare printed circuit board, soldering and its surface-
mounted elements, such as resistors, capacitors, arrays, connectors, chips,
etc.
NOTE1: The “O“ indicates taht the percentage content of the substance to be calculated is not exceeding the reference percentage content.
NOTE 2: The “Exempted‘ item means that the specified chemical substance corresponds to the items exempted by the standard of JIS C 0950.
Regions | Coantact Information |
---|
Asia
| 23511 新北市中和區建一路150號16樓|
+886 2 8226 3858
USA
|
656 W Randolph St, Suite 3E Chicago, IL 60661, USA
|
+1 312 258 9467
Europe
|
Dirch Passers Allé 27, 5.Sal 2000 Frederiksberg, Denmark
|
+45 702 500 75
Parts | Substance Name | EC Number | CAS Number | Contained (PPM) |
---|
LED
|
Hexahydromethylphthalic
|
247-094-1
|
25550-51-0
|
181125
‧ Please do not open the product and touch LED directly.
Environmental conditions for transport and storage
- Temperature: -20 ℃ to +60 ℃
- Humidity: 0% to 90% RH
- Altitude: 0 – 3000m
Download PDF:Steelseries ARCTIS 7 Wireless Gaming Headset User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>