steelseries Arctis 1 Wireless Headphone User Manual
- June 3, 2024
- SteelSeries
Table of Contents
ARCTIC 1
WIRELESS
PRODUCT INFORMATION GUIDE
WELCOME TO ARCTIC
Your new headset is the result of our unyielding pursuit of perfection for over 15 years. We poured our hearts into creating the best possible gaming headset by pushing the boundaries of sound quality, mic clarity, comfort, and style. The Arctic is our glory; now go chase yours.
STEELSERIES ENGINE
Download SteelSeries Engine to customize your audio settings and to integrate
with Engine Apps (like Discord):
steelseries.com/engine
find help atsupport.steelseries.com
PACKAGE CONTENTS
Arctis 1 Wireless Headset
USB-C Wireless Dongle
USB Charging Cable
USB-C to USB-A Adapter Cable
ClearCast Microphone
SYSTEM REQUIREMENTS //
COMPATIBILITY
PC
Playstation 4
Nintendo Switch
Android (with USB-C)
PRODUCT OVERVIEW
- ClearCast Microphone
- Airweave Ear Cushions*
- Volume Wheel
- Microphone Mute Switch
- 3.5 mm Audio Jack
- Power Button
- Power LED
- Micro-USB Jack for charging and firmware updates
- Microphone Jack
- USB-C Wireless Dongle
- Micro-USB charging Cable
- USB-C to USB-A Adapter Cable
- 3.5 mm Audio Cable
* Find accessories and replacement parts atsteelseries.com/gaming-
accessories
SETUP
WIRELESS SETUP
Connection to USB-A
PS4 SETTING > DEVICES > AUDIO DEVICES
Output to Headphones All Audio
WIRED SETUP
CHARGING
To charge the headset, connect the micro-USB charging cable 11 to the micro-
USB jack 08 on the headset, and plug the other end into any USB power source.
The color of the power LED 07 indicates the battery level.
| Green | 100–50 % |
|---|---|
| Yellow | 49–15 % |
| Red | 14–5 % |
| Red (fast blink) | 4–1 % |
POWER ON/OFF
ON
To power on the headset press and hold the power button 06 for at least 2
seconds. You will hear a tone, and the power LED 07 will illuminate.
OFF To power off the headset press and hold the power 06 buttons for at least
3 seconds
PAIRING
Note: The headset is already paired with the transmitter out of the box
- Connect the USB-C wireless dongle 10 to a Windows PC with SteelSeries Engine installed
- Initiate wireless dongle pairing from Engine
- With the headset off, press and hold the power button 06 for 6 seconds
- You will hear a tone when the pairing is completed
MICROPHONE
Microphone attachment
Position the microphone close to the corner of your mouth with the flat surface facing you
MULTIMEDIA CONTROL
Answer/end voice call
single · press Power Button 06
Play/pause music
single · press Power Button 06
Next track
double · · press Power Button 06
Previous track
triple · · · press Power Button 06
REGULATORY
Europe – EU Declaration of Conformity
Hereby, SteelSeries ApS. declares that the equipment which is in compliance
with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC
Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the
Commission of the European Community.
The full text of the EU declaration of conformity is available at the
following internet address: https://steelseries.com/
Operating Temperature: 0 to + 40 °C
SteelSeries ApS. hereby confirms, to date, based on the feedback from our
suppliers indicates that the shipping of our products to the EU territory
complies with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals – (EC) 1907/2006) compliance program. We are fully
committed to offering REACH compliance on the products and posting accurate
REACH compliance status for the all of products.
Frequency bands and Powers (Headset and Transceiver)
a. Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
b. Maximum radio-frequency power transmitted in the frequency band(s) in which
the radio equipment operates:
- EIRP: л/4-DQPSK: 5.35 dBm (Headset ANT 1)
- EIRP: л/4-DQPSK: 4.26 dBm (Headset ANT 2)
- EIRP: л/4-DQPSK: 9.32 dBm (Transceiver)
c. Software Version: V1.06
UK Declaration of Conformity
Hereby, SteelSeries ApS. declares that the following equipment which is in
compliance with Electromagnetic Compatibility Regulations 2016, Electrical
Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment Regulations
2012 issued by the Department for Business, Energy& Industrial Strategy.
The full text of the UK declaration of conformity is available at the
following internet address: www.steelseries.com
TURKEY ROHS COMPLIANCE
Republic of Turkey: In conformity with the EEE Regulation
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
WEEE
**** This product must not be disposed of with your other household waste or
treated in compliance with the local regulations or contact your local
city office, your household waste disposal service, or the shop where you
purchased the product.
Safety Guideline for Lithium Battery
**** This battery must not be disposed of with your other household waste or
treated in compliance with local regulations contact your local city office,
your household waste disposal service, or the shop where you purchased the
product.
“CAUTION!” Risk of explosion if the battery pack is not replaced by the
same type as specified by the manufacturer.
Please keep following all listed important warnings and cautions below while
using this battery pack to avoid any damage or hazard.
- The battery polarity (+) and (-) shall not be connected and charged reversely. Risk of explosion if the battery polarity (+) and (-) is reversed.
- Please keep this battery pack away from fire and high heat sources due to explosion might happen. Do not place your battery pack close to any heater or hot location.
- This battery pack shall not be hit or impacted. This battery pack shall not be dealt with with any sharp or keen objects either.
- This battery pack shall not be exposed to moisture, dripping, or splashing.
- If any electrolyte flows out of this battery pack when touching the user’s eyes and skin, please seek medical advice immediately.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements, the
device can be used in portable exposure conditions without restriction.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Headset FCC ID: ZHK-HS00021
Transceiver FCC ID: ZHK-HS00021TX
Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built-in
radios.
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en
conjonction avec une autre antenne ou un autre émetteur, exception faites
The County Code Selection feature is disabled for products marketed in the US/
Canada.
The appliance must not be exposed to splashes or drops of water and it should
not be used as a support for any object filled with liquid, such as a vase.
Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements, The
device can be used in portable exposure conditions without restriction.
Headset IC: 9638A-HS00021
Transceiver IC: 9638A-HS00021TXX
SteelSeries ApS.
Wireless Headset/ Transceiver
HS-00021/HS-00021TX
R-R-SS4-HS-00021/ R-R-SS4-HS-00021TX
SteelSeries ApS./China
Wireless Headset *Il.P. (fit): H5-00021
Equipment name Type designation (Type)
Unit| Restricted substances and their chemical symbols
Lead
(Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent
chromium
(Cr+6)| Polybrominated
biphenyls
(PBDE)| Polybrominated
diphenyl ethers
(PBDE)
Plastic| 0| 0| 0| 0| 0| 0
PCBA| X| 0| 0| 0| 0| 0
Cables| X| 0| 0| 0| 0| 0
Metal| X| 0| 0| 0| 0| 0
Note 1: “Exceeding 0.1 WI %” and “exceeding 0.01 wt %” indicates that the
percentage content of the
restricted substance exceeds the reference percentage value of the present
condition.
Note 2: 0 indicates that the percentage content of the restricted substance
does not exceed the percentage of the reference value of presence.
Note 3: X Indicates that the restricted substance corresponds to the exemption
Region| Address| Telephone
---|---|---
Asia| 4F.-4, No. 186, Jian 1st Rd., Zhonghe Dist., New Taipei City 235603,
Taiwan| +886 2 8227 1999
Europe| Havneholmen 8, 1 st
Floor,
2450 Copenhagen SV, Denmark| +45 702 500 75
USA| 656 W Randolph St., Suite 3E,
Chicago, IL 60661, USA| +1 312 258 9467
More information and support fromhttps://steelseries.com/
Product Name Wireless Headset
Model No. HS-00021
Rated 5 V 600 mA
Custom Union Compliance.
Accessories information (
Product Name: Transceiver
Model No. HS-00021TX
Rated: 5 V 100 mA
Made in China
Operating Temperature: 0 to + 40 ° C
Direct Current
ACMA Compliance
(Australia/New Zealand)
Complies with Singapore approval (IMDA)
IMDA Standards
DA 106032
Malaysia Approval (SIRIM)
learn more atsteelseries.com
References
- Official Site - For Glory | SteelSeries
- Official Site - For Glory | SteelSeries
- Engine | SteelSeries
- Gaming Accessories | SteelSeries
- Official Site - For Glory | SteelSeries
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>