IBEX 10010479 Suzuki Side Stand Extension Instruction Manual
- June 1, 2024
- IBEX
Table of Contents
IBEX 10010479 Suzuki Side Stand Extension
Product Information
Specifications
- Color: Schwarz
- Item Number: 10010479
- Mounting Instruction Revision: ./.
- Date of Issue: 19.12.2023
Product Usage Instructions
Preparation
Observe any country-specific regulations by the legislature or homologation
regulations.
Assembling
According to vehicle manufacturers specification all remounted parts and
connections must be reassembled or replaced by the parts and connections
supplied by our company. Secure all threads with a medium-strong liquid screw
protection unless stated otherwise. Tighten all bolts and nuts according to
A4/ISO standards. After assembly, ensure that all parts and connections are
properly remounted.
Function Check
After assembly, ensure the absolute freedom of movement and proper function
of all vehicle parts. Conduct a comprehensive functional check before starting
your journey. After 100 km, recheck the tightness of all parts and connections
demounted during assembly.
Legend
- Left Side: Ansicht von links in Fahrtrichtung
- Right Side: Ansicht von rechts in Fahrtrichtung
- Position Number & Torque: Schraubensicherung verwenden
- Packed By: Konfektionierung durch
- Packaging Date: Datum der Konfektionierung
Frequently Asked Questions (FAQ)
Q: What should I do if I encounter errors or changes in the product?
A: Errors and changes are expected. Please be aware that the product is
subject to technical and design changes. Contact us for any specific concerns.
Email: [email protected]
Tel.: 0351/ 27278100
Fax: 0351/ 27278101
side stand foot kit
attention
- Cornering and ground clearance can be reduced by using this product!
- For your own safty we recommend having installation and/ or servicing carried out by a specialist workshop. We assumes no liability for damage caused by improper installation and/ or maintenance work.
- No torque specifications: Use the torque defined by vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer´s specifications.
8.8| Regelgewinde / coarse thread| M4| M5| M6| M8|
M10| M12| 10.9| Regelgewinde / coarse thread| M4| M5|
M6| M8| M10| M12
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
Anzugsmoment / torque| 2,8| 5,5| 9,6| 23| 46| 79|
Anzugsmoment / torque| 4,1| 8,1| 14| 34| 67| 115
Thank you for choosing this quality product from IBEX!
The assembly and/or maintenance of this product requires a good technical
understanding. For your own safety, we recommend that the assembly and/or
maintenance is carried out by a specialist workshop. Our company assumes no
liability for any damage caused by improper assembly or maintenance. Be sure
to keep in mind all the notes provided in the assembly instructions. Please
also note all the instructions relevant to the assembly in the vehicle manual.
Non- observance can cause damage to the vehicle or danger to the driver!
Please keep the assembly instructions as a reference.
General Notes
Observe any country-specific regulations by the legislature or homologation regulations.
Preparation
Read the assembly instructions carefully and make sure all parts of the list
are available. Make sure that your vehicle stands safely and can´t fall over.
Turn off the engine and pull the ignition key. If necessary, allow the
engine/exhaust to cool down. When working on the electrics disconnect the
vehicle battery. Be sure to use only suitable tools. If necessary get help
with the assembly work by a second person.
Assembling
According to vehicle manufacturers specification all demounted parts and connections must be reassembled or replaced by the parts and connections supplied by our company. If not stated different secure all threads with a medium-strong liquid screw protection. If not stated different by the vehicle manufacturer or our company, all bolts and nuts must be tightened according to A4/ISO. After assembly, make sure that all previously demounted parts and connections have been properly remounted.
Funktion Check:
After assembly, pay attention to the absolute freedom of movement and proper
function of all vehicle parts. Cables, trains and hoses must not scrub or be
clamped. Do a comprehensive functional check before the start of your journey.
After 100 km please check the proper tightness of all parts and connections
demounted during assembly.
RAL Farbton:
__
Color: Item No.:
schwarz 10010479
(Pos.No.)| (drawing number)| (description)|
(quantity)| [Nm]| / (special features)
1| 2961_0_11| | side stand foot| 1| |
2| 2961_0_12| | clamping plate| 1| |
3| DIN 7991 – M5 x 10| | countersunk hexagon socket screw| 3| 6|
Copyright by:
IBEX GmbH Sosaer Straße 35 01257 Dresden
Irrtümer und Änderungen vorbehalten. Technische und Design-Änderungen vorbehalten Errors and changes expected. Subject to technical and design changes.
Email: [email protected]
Tel.: 0351/ 27278100
Fax: 0351/ 27278101