IBEX 10008378 Centerstand Kit Instruction Manual
- June 4, 2024
- IBEX
Table of Contents
IBEX 10008378 Centerstand Kit
center
stand kit
Attention
Cornering and ground clearance can be reduced by using this product! For your
own safety we recommend having installation and/ or servicing carried out by a
specialist workshop. We assumes no liability for damage caused by improper
installation and/ or maintenance work. No torque specifications: Use the
torque defined by vehicle manufacturer! The standard torque in this table can
be used as long as it is within the vehicle manufacturer´s specifications.
max. load : k.E. kg (n.R. lbs)
max .speed: k.E. km/h (n.R. mp/h)
8.8| Regelgewinde / coarse thread| M4| M5| M6| M8|
M10| M12| 10.9| Regelgewinde / coarse thread| M4| M5|
M6| M8| M10| M12
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
Anzugsmoment / torque| 2,8| 5,5| 9,6| 23| 46| 79|
Anzugsmoment / torque| 4,1| 8,1| 14| 34| 67| 115
Thank you for choosing this quality product from IBEX!
The assembly and/or maintenance of this product requires a good technical
understanding. For your own safety, we recommend that the assembly and/or
maintenance is carried out by a specialist workshop. Our company assumes no
liability for any damage caused by improper assembly or maintenance. Be sure
to keep in mind all the notes provided in the assembly instructions. Please
also note all the instructions relevant to the assembly in the vehicle manual.
Non- observance can cause damage to the vehicle or danger to the driver!
Please keep the assembly instructions as a reference.
General Notes:
Observe any country-specific regulations by the legislature or homologation
regulations.
Preparation:
Read the assembly instructions carefully and make sure all parts of the list are available. Make sure that your vehicle stands safely and can´t fall over. Turn off the engine and pull the ignition key. If necessary, allow the engine/exhaust to cool down. When working on the electrics disconnect the vehicle battery. Be sure to use only suitable tools. If necessary get help with the assembly work by a second person.
Assembling:
According to vehicle manufacturers specification all demounted parts and
connections must be reassembled or replaced by the parts and connections
supplied by our company. If not stated different secure all threads with a
medium-strong liquid screw protection. If not stated different by the vehicle
manufacturer or our company, all bolts and nuts must be tightened according to
A4/ISO. After assembly, make sure that all previously demounted parts and
connections have been properly remounted.
Funktion Check:
After assembly, pay attention to the absolute freedom of movement and proper
function of all vehicle parts. Cables, trains and hoses must not scrub or be
clamped. Do a comprehensive functional check before the start of your journey.
After 100 km please check the proper tightness of all parts and connections
demounted during assembly.
(legend)
-
(left side)
-
(right side)
-
(position number and torque)
-
(use screw lock)
|
RAL Farbton:
Color:
| Artikelnummer:
---|---|---
Item No.:
9005
( jet black)
| 10008378
Mounting Instruction
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>