IBEX 10008499 Main Stand Honda Instructions
- June 4, 2024
- IBEX
Table of Contents
10008499 Main Stand Honda
Instructions
Montagehinweis
Mounting Instruction
10008499 Main Stand Honda
Rev.: Ausgabedatum:
Date of issue:
./.20.01.2022 center stand kit
Warning
Cornering and ground clearance can be reduced by using this product!
No torque specifications: Use the torque defined by the vehicle manufacturer!
The standard torque in this table can be used as long as it is within the
vehicle manufacturer´s specifications.
For your own safety, we recommend having installation and/ or servicing
carried out by a specialist workshop. We assume no liability for damage caused
by improper installation and/ or maintenance work.
8.8 | M4 | M5 | M6 | M8 | M10 | M12 |
---|---|---|---|---|---|---|
2,8 | 5,5 | 9,6 | 23 | 46 | 79 | |
10.9 | M4 | M5 | M6 | M8 | M10 | M12 |
--- | --- | --- | --- | --- | --- | --- |
4,1 | 8,1 | 14 | 34 | 67 | 115 |
Thank you for choosing this quality product from IBEX!
The assembly and/or maintenance of this product requires a good technical
understanding. For your own safety, we recommend that the assembly and/or
maintenance is carried out by a specialist workshop. Our company assumes no
liability for any damage caused by improper assembly or maintenance. Be sure
to keep in mind all the notes provided in the assembly instructions. Please
also note all the instructions relevant to the assembly in the vehicle manual.
Nonobservance can cause damage to the vehicle or danger to the driver! Please
keep the assembly instructions as a reference.
General Notes:
Observe any country-specific regulations by the legislature or homologation
regulations.
Preparation:
Read the assembly instructions carefully and make sure all parts of the list are available. Make sure that your vehicle stands safely and can´t fall over. Turn off the engine and pull the ignition key. If necessary, allow the engine/exhaust to cool down. When working on the electrics disconnect the vehicle battery. Be sure to use only suitable tools. If necessary get help with the assembly work by a second person.
Assembling:
According to vehicle manufacturers’ specifications, all demounted parts and
connections must be reassembled or replaced by the parts and connections
supplied by our company. If not stated differently secure all threads with
medium-strong liquid screw protection. If not stated differently by the
vehicle manufacturer or our company, all bolts and nuts must be tightened
according to A4/ISO. After assembly, make sure that all previously demounted
parts and connections have been properly remounted.
Funktion Check:
After assembly, pay attention to the absolute freedom of movement and proper
function of all vehicle parts. Cables, trains, and hoses must not scrub or be
clamped. Do a comprehensive functional check before the start of your journey.
After 100 km please check the proper tightness of all parts and connections
demounted during assembly.
Legende:
| | |
---|---|---|---
Ansicht von links in(left side)| Ansicht von rechtsin(right side)|
Positionsnummer &(position number and torque)| Schraubensicherung(use screw
lock)
(Pos.No.)| (drawing number)| (description)| (quantity)| mina| (special
features)
---|---|---|---|---|---
1| 2160_0 11| Hauptstander kompl.| centerstand compl.| 1| |
2| 2160_0_36| Montag eset| mounting kit| 1| |
2.| gn_352-20-10-m6-s-55| Anschlagpuffer Form S M6 20×10| rubber damper| 1| |
2.| 2160_0_33| Federanlenkblech| spring bracket| 1| |
2.| 1277_0_28| Zugfederset 25x120_HK_0°| spring set| 1| |
2.| 2160_0_34| DistanzhUlse_30x20x4-25x20x58| spacer| 2| |
3.| DIN 94_4 x 50_STAHL verzinkt| Splint| pin| 2| |
3.| 2160_0_35| Distanzscheibe 31×25.5×1.5| washer| 2| |
Copyright by:
IBEX GmbH Sosaer Straße 35 01257 Dresden
Irrtümer und Änderungen vorbehalten. Technische und Design-Änderungen
vorbehalten
Errors and changes expected. Subject to technical and design changes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>