IBEX 10009943 Crashbar Kit Instruction Manual

: October 30, 2023
: IBEX

Table of Contents

IBEX 10009943 Crashbar Kit
Product Information
Product Usage Instructions
Mounting Instruction
Legende
crash bar kit
Documents / Resources

IBEX 10009943 Crashbar Kit

IBEX-10009943-Crashbar-Kit-product

Product Information

RAL Farbton: 9005
Color: Tiefschwarz / Jet Black
Item Number: 10009943
Mounting Instruction Revision: /.
Date of Issue: 13.03.2023
No torque specification provided: Use the torque specified by the vehicle manufacturer! The standard torque from the table can be used if it complies with the vehicle manufacturer’s specifications.
Cornering and ground clearance can be reduced by using this product!
For your own safety, we recommend having installation and/or servicing carried out by a specialist workshop.
We assume no liability for damage caused by improper installation and/or maintenance work.

Product Usage Instructions

General Notes

Observe any country-specific regulations by the legislature or homologation regulations.

Preparation

According to the vehicle manufacturer’s specifications, all demounted parts and connections must be reassembled or replaced by the parts and connections supplied by our company. If not stated differently, secure all threads with medium-strong liquid screw protection. If not stated differently by the vehicle manufacturer or our company, all bolts and nuts must be tightened according to A4/ISO. After assembly, make sure that all previously remounted parts and connections have been properly remounted.

Assembling

After assembly, pay attention to the absolute freedom of movement and proper function of all vehicle parts. Cables, trains, and hoses must not scrub or be clamped. Do a comprehensive functional check before the start of your journey. After 100 km, please check the proper tightness of all parts and connections demounted during assembly.

Legend:

Left Side: Ansicht von links in Fahrtrichtung
Right Side: Ansicht von rechts in Fahrtrichtung
Position Number and Torque: Positionsnummer & Anzugsmoment
Screw Lock: Schraubensicherung verwenden
Packed By: Konfektionierung durch
Packaging Date: Datum der Konfektionierung
Please keep the assembly instructions as a reference.
Email: info@ibex-parts.de Tel.: 0351/ 27278100 Fax: 0351/ 27278101
Errors and changes are expected. Subject to technical and design changes.

Mounting Instruction

crash bar kit

IBEX-10009943-Crashbar-Kit-fig-1

attention

Cornering and ground clearance can be reduced by using this product!
For your own safety, we recommend having installation and/ or servicing carried out by a specialist workshop. We assume no liability for damage caused by improper installation and/ or maintenance work.
No torque specifications: Use the torque defined by the vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer’s specifications.

Thank you for choosing this quality product from IBEX!

The assembly and/or maintenance of this product requires a good technical understanding. For your own safety, we recommend that the assembly and/or maintenance is carried out by a specialist workshop. Our company assumes no liability for any damage caused by improper assembly or maintenance. Be sure to keep in mind all the notes provided in the assembly instructions. Please also note all the instructions relevant to the assembly in the vehicle manual. Nonobservance can cause damage to the vehicle or danger to the driver! Please keep the assembly instructions as a reference.

General Notes:

Observe any country-specific regulations by the legislature or homologation regulations.

Preparation:

Read the assembly instructions carefully and make sure all parts of the list are available. Make sure that your vehicle stands safely and can´t fall over. Turn off the engine and pull the ignition key. If necessary, allow the engine/exhaust to cool down. When working on the electrics disconnect the vehicle battery. Be sure to use only suitable tools. If necessary get help with the assembly work by a second person.

Assembling:

According to the vehicle manufacturer’s specifications, all demounted parts and connections must be reassembled or replaced by the parts and connections supplied by our company. If not stated differently secure all threads with a medium-strong liquid screw protection. If not stated differently by the vehicle manufacturer or our company, all bolts and nuts must be tightened according to A4/ISO. After assembly, make sure that all previously demounted parts and connections have been properly remounted.

Funktion Check:

After assembly, pay attention to the absolute freedom of movement and proper function of all vehicle parts. Cables, trains, and hoses must not scrub or be clamped. Do a comprehensive functional check before the start of your journey. After 100 km please check the proper tightness of all parts and connections demounted during assembly.