LUVION PBW-01 Portable Bottle Warmer User Manual
- June 1, 2024
- LUVION
Table of Contents
PORTABLE BOTTLE WARMER
ULTRA
User Manual INSTRUCTION MANUAL
WELCOME
Thank you for purchasing the Luvion Portable Bottle Warmer. With this Quick Start Guide you have all information to quickly start using your Portable Bottlewarmer. Please retain this guide for further reference. To minimize paper waste and limit environmental impact we only add this Quick Start Guide and safety instruction. For further information, download the online user manual at: www.luvion.com/contact.
BOX CONTENT
PRODUCT OVERVIEW
FIRST USE
- Fully charge the battery before using the Luvion Ultra Portable Bottle Warmer.
- Thoroughly clean the device before hearting your first babyfeed.
- Not all bottle brands fit directly onto the Luvion Portable Bottle warmer, some brands require an adapter. You can find all supported bottle brands and adapters in the user manual downloadable on our website: www.luvion.com/contact
INSTRUCTIONS
Pour water or milk into the baby bottle. Install the Portable bottle warmer
upside down on the bottle. Press the on/off button to turn on the Portable
Bottle Warmer. Press the power button again to select the temperature (37 – 40
– 45 – 50). Heat to the selected temperature.
The liquid is kept warm at the
selected temperature.
PLACEMENT OF RING
The silicone ring should be placed in the “u” position.
SAFETY INSTRUCTIONS
Warnings for safe use
- Always use this product with adult supervision. Keep this product out of reach of children.
- Please inspect the product before each use.
- Please clean the product before each use.
- Please use this product under the ambient temperature of 4-50°C.
- Do not use corrosive cleaning agents, anti-bacterial cleaners or high concentration detergents, they may cause plastic components to crack. Should this occur, please replace them immediately.
- Please wash your hands thoroughly before contacting with sterilised components.
- Do not leave the product in sunlight, heat or sterilising solution for a long time, as it may damage the product.
- Do not immerse the product in water or any other liquid.
- Do not expose the product to direct sunshine, heat or a hot environment.
- Do not touch the stainless steel parts during heating to avoid burnings.
- Please clean and dry the product when it cools down after each use.
- It is recommended to use 5V/2A charger or 5V/2A power bank.
- Do not lose the sealing ring when you clean the stainless steel parts.
- There is built-in Li-polymer battery in the bottle warmer. Do not use the product in the strong electric field in case that it will damage the battery protector.
- Please unplug the product when it is not in use. Do not charge for a long time in case of fire or other accidents.
- This product can be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge if only they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children should be supervised to ensure that they do not play with the product.
- Always check the heated liquid temperature before you feed your child. Please contact your doctors if there is any questions about feeding.
- Keep the product housing closed. When opening the housing the product can get damaged and the warranty expires.
- Place the dust cover on top of the Luvion Portable Bottle warmer to prevent dirt and dust from entering the heating area.
Recycling
- Do not dispose this product (and accessories) with normal household waste at the end of its life. Hand in the product at an offcial collection point for recycling or at a shop where you can buy a comparable product.
- The battery should be handed in at an ocial collection point.
CLEANING
Cleaning
- Unplug the USB charger cable
- Close the charging port cover
- Long press the power button to shutdown
- Clean the stainless steel element with hot water
Descaling
- Mix white vinegar with cold water to descale the Luvion Portable Bottle warmer
- Let the appliance heat for 30 minutes and then leave the solution in the Portable Bottle warmer until all scale has dissolved
- Empty the Portable bottle warmer and clean the stainless steel surface thoroughly.
- You can also use citric acid based descalers, do not use any other types of descales as it can damage the Portable bottle warmer.
Warning: Never submerge the Portable bottle warmer in any liquid, or place it in a microwave or steam steriliser this will damage the device permanently.
SPECIFICATIONS
| Product Size: | 81X83X116mm |
|---|---|
| Charging Voltage: | 5V |
| Working Voltage: | 6~7.4V |
| Output: | 35W |
| Netto weight: | 364g |
| Battery capacity: | 9000mAh |
| Adapter: | USB-C |
| Battery specifications: | 7.4V |
ADAPTER
Compatible with
Alvär Baby small neck
Difrax – S-bottle small neck
Kruidvat small neck
Etos small neck
BIBS
Nuby standard neck
Dr. Brown Options+ (Glass) Anti-colic small neck
NUK First Choice+ small neck
Medela mothermilk bottle
Compatible with
Alvär Baby wide neck
Kruidvat wide neck
Etos wide neck
MAM Easy wide neck
We-Too 
Compatible with
Dr. Brown Options+ (Glass) Anti-colic wide neck
Suavinex wide neck
Compatible with
NUK First Choice
Compatible with
Tommee Tippie Closer to Nature
Compatible with
NUK Simply Natural Baby extra wide neckNo adapter required
Philips AVENT Natural
Difrax – S-bottle wide neck
LUVION PREMIUM BABYPRODUCTS
Kleveringweg 7
2616 LZ Delft NL
Luvion Premium Babyproducts
Delft, The Netherlands
Visit us on www.Luvion.com