Kruger and Matz KM0858 Foldable Fast Wireless Charger Stand Owner’s Manual
- August 12, 2024
- Kruger and Matz
Table of Contents
Kruger and Matz KM0858 Foldable Fast Wireless Charger Stand
OWNER’S MANUAL
MODEL: KM0858
Read this instruction manual and keep it for future reference. Follow the guidelines from this manual.
1. Producer does not claim responsibility for damages caused by inappropriate
handling and use of the product.
2. Before connecting, make sure the voltage of the power supply socket and
the charger corresponds as well as the voltage of the charger and external
device.
3. Protect the cable from sharp edges and other factors which could lead to
their damage.
4. Protect this device from water, humidity and other liquids (also while
storing).
5. Disconnect the charger after finished charging.
6. This appliance may be used by children who are above 8 years old and by
persons with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, if they are supervised and guided by a person who
is responsible for their safety in a cautious manner for all the safety
precautions being understood and followed. Children should be supervised to
ensure that they do not play with the appliance. Children should not perform
cleaning and servicing of the device unsupervised.
7. Do NOT connect the charger to damaged external devices.
8. Do not disassemble nor repair this device yourself. The device has no user
serviceable parts inside. In case of damage, contact authorized service point
for check-up or repair.
Do not use this device if it has been damaged.
9. Manufacturer does not guarantee compatibility with all external devices
that support wireless charging.
10. Protective case of the phone may have negative effect on the charging
process. If charging has not started after putting the phone onto the charger,
try again with the case taken out.
PRODUCT DESCRIPTION
1. Wireless charging area
2. Phone stand
3. LED indicator
4. USB-C socket
OPERATION
1. Before the first use, remove the protective films from the anti-slip feet
and the phone stand
2. Connect the stand to the power supply adapter with provided USB cable. The
LED will glow red, indicating that it is ready to start charging.
3. Put your phone (or other external device) on the wireless charging panel.
The LED will glow blue.
After finished charging the LED will go off.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other
European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.
Specifications
- Brand: Foldable fast wireless charger stand KM0858
- Input: USB-C
- Wireless Charging Compatibility
- LED Indicator: Red for standby, Blue for charging
Product Usage Instructions
Safety Instructions
Read and follow the safety instructions provided in the manual.
Ensure proper handling and usage of the product to prevent any accidents or
damage.
Operation
- Before the first use, remove the protective films from the anti-slip feet and phone stand.
- Connect the stand to a power supply adapter using the included USB cable. The LED will turn red, indicating readiness for charging.
- Place your phone or external device on the wireless charging panel. The LED will turn blue, indicating charging is in progress.
Once charging is complete, the LED will turn off.
FAQ
Q: What should I do if the LED indicator does not turn on?
A: Make sure the charger is properly connected to a power source and that the device is correctly placed on the charging panel. If the issue persists, check the power source and connections.
Q: Can this charger be used with all types of smartphones?
A: The charger is compatible with devices that support wireless charging. Check your device’s specifications to ensure compatibility.
Q: Is it safe to leave my phone charging on the stand overnight?
A: It is generally safe to leave your phone on the stand forcharging overnight. The charger is designed to stop charging once the device is fully charged, but it’s recommended to avoid prolonged charging periods.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>