FORNO FBOEL1371-30 Gallico 30 in. Single Electric Convection Installation Guide

FORNO FBOEL1371-30 Gallico 30 in. Single Electric Convection

Specifications

• Model Numbers : FBOEL1371-30, FBOEL1388-30
• Conforms to : UL STD 858 & CSA / ANSI STD Z21.1 Certified to CSA STDs C22.2#61 & CSA STD 1.1
• Electrical Requirement : Standard household electrical outlet
• Warranty : Refer to the warranty section in the manual for details

Product Information

The Forno Single or Double Wall Ovens, models FBOEL1371-30 and FBOEL1388-30, are designed to provide efficient cooking performance. Please read the entire instruction manual before using the appliance for the first time.

Installation Guide

1. Package Contents: Check all items listed in the manual are included.
2. Door Handle Installation: Follow the step-by-step guide provided in the manual for installing the door handle securely.
3. Oven Rack Installation: Place the oven racks in the desired positions following the instructions to ensure proper placement.
4. Electrical Requirement: Ensure the oven is connected to a standard household electrical outlet as per the specifications.
5. Product Dimensions: Refer to the dimensions provided in the manual to plan for installation space.
6. Installation Instructions: Follow the detailed installation guide to set up the oven correctly.

Operating Instructions

Before using the oven, familiarize yourself with the control panel, settings, and cooking modes. Always preheat the oven to the recommended temperature before placing food inside. Follow cooking times and temperatures specified in your recipes for best results.

Care and Maintenance

Regularly clean the oven interior with a mild detergent and water. Remove any spills or food residues promptly to prevent buildup. Refer to the care instructions for specific cleaning recommendations for your oven model.

Troubleshooting

If you encounter any issues with the oven’s operation, refer to the troubleshooting section in the manual. It provides solutions for common problems that you can resolve on your own.

Read these instructions carefully before using your appliance, and keep them carefully.

If you follow the instructions, your appliance will provide you with many years of good service.

SINGLE OR DOUBLE-WALL OVENS

Safety

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is a safety alert symbol. It will alert you to potential personal or property safety hazards. Obey all safety messages to avoid any property damage, personal injury or death.

WARNING indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death.

CAUTION indicates a moderately hazardous situation which, if not avoided, could result in minor or moderate injury. All safety messages will alert you to what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury and tell you what can happen if the instructions are not followed.

STATE OF CALIFORNIA PROPOSITION 65 WARNINGS:

• WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
• WARNING : This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.
• WARNING: Read all safety instructions before using the product. Failure to follow these instructions may result in fire, electrical shock, serious injury or death.

GENERAL SAFETY INSTRUCTIONS

1. Use this appliance for its intended purpose as described in this instruction manual.
2. Have your appliance installed and properly grounded by a qualified installer in accordance with the provided installation instructions. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation, improper use of this appliance, or failure to heed the warnings listed, and the warranty will be voided.  Any adjustment and service should be performed only by a qualified oven installer or service technician. Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this manual.
3.  Plug your oven into a 240-volt grounded outlet only. Do not remove the round grounding prong from the plug. If in doubt about the grounding of the home electrical system, it is your responsibility and obligation to have an ungrounded outlet in accordance with the
4. National Electrical Code. Do not use an extension code with this appliance.
5. Before performing any service, unplug the oven or disconnect the power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.
6. Be sure all packing materials are removed from the oven before operating to prevent ignition of these materials.
7. Avoid scratching or impacting glass displays. Doing so may lead to glass breakage. Do not cook on a product with broken glass. Shock, fire, or cuts may occur.
8. Do not leave children alone or unattended in an area where an appliance is in use. They should never be allowed to climb, sit or stand on any part of the oven.
9. Do not touch the heating elements or the interior surface of the oven. These surfaces may be hot enough to burn even though they are dark in color. During and after use, do not touch, or let clothing or other flammable materials contact any interior area of the oven; allow sufficient time for cooling first. Other surfaces of the appliance may become hot enough to cause burns. Potentially hot surfaces include the oven vent opening, surfaces near the opening, crevices around the oven door, metal trim parts above the door, any back guard, or high shelf surface.
10. Do not heat unopened food containers. Pressure could build up and the container could burst, causing any injury.
11. Stand away from the range when opening the oven door. Escaping hot air or steam can cause burns to hands, face and/or eyes.
12. Never place cooking utensils, pizza or baking stones, or any type of foil or liner on the oven floor. These items can trap heat or melt, resulting in damage to the product and risk of shock, smoke or fire.
13. Place oven racks in desired location while oven is cool. If the rack must be moved while the oven is hot, be careful toavoid touching hot surfaces.
14. Never broil with the door open. Open-door broiling is not advised due to overheating of control knobs.
15. Do not use the oven for storage purposes. Do not leave paper products, cooking utensils, or food in the oven when not being used.
16. Do not store items of interest to children in cabinets above an oven. Children who climb onto the oven to reach items could be seriously injured.
17. Do not allow children to use this appliance unless closely supervised by an adult.

Extremely Heavy

WARNING

Proper equipment and adequate manpower are needed when moving the appliance to avoid personal injury or damage to the unit or the floor. Failure to follow this advice may result in damage or personal injury.

WARNING

Never pour cold water to hot surfaces in a hot oven. The steam created could cause serious burns or scalding and the sudden change in temperature can damage the enamel in the oven.

WARNING Cook food thoroughly using a food thermometer to check temperatures in multiple locations for protection against foodborne illness.

WARNING

KEEP FLAMMABLE MATERIAL AWAY FROM THE RANGE

Failure to do so may result in fire or personal injury. It is important to avoid storing or using flammable materials in an oven, such as paper, plastic,pot holders, linens, wall coverings, curtains, drapes, gasoline or any other flammable vapors and liquids. Loose-fitting or hanging garments should also be avoided while using the appliance, as they may catch fire if they come into contact with hot surfaces, causing serious burns.

Product Contents

Package Contents

Before you begin the installation, follow the required steps.

1. Remove all packing material.
2. Make sure all accessories are present. Contact customer support for damaged or missing parts at 1-866-231-8893 or email info@forno.ca.

Door handle installation

The door handle is not pre-installed. To install the handles, you can refer to the diagram below which will show you how to install them step-by-step.

French Door:

Repeat follow steps 1-3 again for the right door.

Chef Door: Only for FBOEL1388-30: Lower oven

• Step 1: Open the oven door and remove the 2x black rubber caps located at the back of the oven door. Be careful not to scratch the enamel. DO NOT THROW AWAY the cap
• Step 2: To reach the embedded screw, insert the screwdriver into the hole and push the screw forward until the threads appear on the other side.
• Step 3: Position the handle holder correctly to accept the screw bolt on the outside of the oven door, then tighten the screw. Do not over-tighten the screw.
• Step 4 : Repeat steps 1-3 for the other doors, then replace the black rubber cap.

Oven rack installation

1. Open the oven door
2. Pull the rail outwards
3. Make sure the first hinge slides on top of the arm, the second hinge at the bottom, and the two front should be on the top of the arm. Push the rack completely towards the back. This completes the installation.

Oven rack installation

To remove and reposition the rack, lift the front of both rails, then lift and pull the rails towards you. Then lift the back of the rails and reposition the rack on the new level.

Electrical Requirement

• Your appliance must be electrically grounded in accordance with local codes or, in the absence of local codes, in accordance with the National Electrical Code (ANSI/NFPA 70, latest edition). In Canada, electrical grounding must be in accordance with the current CSA C22.1 Canadian Electrical Code Part 1 and/or local codes.
• The power supply must be the correct polarity. Reverse polarity will result in continuous sparking of the electrodes, even after flame ignition. If there is any doubt as to whether the power supply has the correct polarity or is grounded, have it checked by a qualified electrician?
• Performance may be compromised if the electrical supply is less than 240 volts. The oven is supplied with a conduit consisting of two insulated hot lead conductors and a bare ground conductor. The wiring diagram covering the control circuit is provided with the oven.

Product Dimension

INSTALLATION AND SERVICE MUST BE PERFORMED BY QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

United States and Canada

WARNING

FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Your new wall oven has been designed to fit a variety of cutout sizes to make the job of installation easier. The first step of your installation should be to measure your current cutout dimensions and compare them to the cutout dimensions chart below for your model. You may find little or no cabinet work being necessary

Carpentry And Support:

Refer to the dimensions of your appliance and the cabinet cutouts and space needed to fit the oven. The oven support or base surface must be solid plywood, solid wood, or a material verified to meet the temperature and strength requirements needed for your installation. No fiberboard, laminated/coated wood or other material should be used that is not verified to meet temperature and strength requirements.

• All materials used in installation must withstand temperatures of 194 °F (90 °C).
• The support surface must be level and flat from side to side, and from front to rear.If the cabinet does not have a solid floor or support surface, braces may be installed in the cabinet. Bracing may also be used under the cabinet floor for added strength and support. Braces must run front to rear, meet all material and temperature requirements, and be flat and level. The bracing should be 2” (5 cm) minimum width to support the oven side rails. Standard 2” x 4” (5 cm x 10 cm) studs are recommended.

WARNING

Do not remove spacers (if equipped) on the side walls of the built-in oven. These spacers center the oven in the space provided. The oven must be centered to prevent excess heat buildup that may result in heat damage or fire.

NOTES:

1. Allow a minimum of 21” (53.3 cm) clearance in front of unit for the oven door when it is open.
2. Dimension G (cutout depth) is critical to the proper installation of the built-in oven. If the oven trim does not butt against the cabinet, or if noise is heard on convection models, verify dimension G to assure it is according to the required dimension.
3. For a cutout height greater than 49³⁄4” (126.4cm), add a 2”(5 cm) wide wood shim of appropriate height on each side of the opening under the appliance side rails (not included).

WARNING

Do not remove spacers (if equipped) on the side walls of the built-in oven. These spacers center the oven in the space provided. The oven must be centered to prevent excess heat buildup that may result in heat damage or fire.

NOTES:

1.  Allow a minimum of 47” clearance in front of unit for the oven door when it is open.
2. Dimension 24” is critical to the proper installation of the built-in oven. If the oven trim does not butt against the cabinet, or if noise is heard on convection models, verify 24” to assure it is the required depth.
3. For a cutout height greater than 30 1/4” add a 2” wide wood shim of appropriate height on each side of the opening under the appliance side rails (not included).

Installation Instruction

IMPORTANT: This appliance shall be installed only by authorized persons and in accordance with the installation instructions, municipal building codes, and electrical wiring regulations. IT IS RECOMMENDED TO HAVE AT LEAST 2 PEOPLE TO ASSIST WITH THE INSTALLATION PROCESS.

TO INSTALL YOUR WALL OVEN, FOLLOW THESE STEPS CAREFULLY:

Step 1:

Note : Do not use the handle or any portion of the front frame for lifting.

1. Move the packaging to the location where you wish to install and place the cardboard under it to avoid damaging to the floor.
2. Remove all the shipping materials and tapes from the wall oven.
3. Put the literature and hardware packaging aside.
4. Take out the racks and other parts, and place them in a safe location.

Step 2: Remove the oven door (CHEF DOOR ONLY)

IMPORTANT : The oven door is heavy and fragile, and the door front is glass. To avoid oven door glass breakage, use both hands and grasp only the sides of the oven door to remove it.

To remove the oven door:

1. Open the oven door completely.
2. Lift up the hinge latch on each side to open
3. Close the oven door as far as it will shut.
4. While grasping both outside edges of the oven door, lift up on the door.
5. Continue to push the top of the door closed while pulling the bottom of the door out of the hinge receivers in the door frame.

STEP 3: Install oven

1. Using two or more people, grasp the ceiling of the oven cavity and lift the oven onto a table or platform even with the cutout opening.
2. Feed the flexible electrical supply conduit from the oven to the junction box.

NOTE : The platform must be able to support the following weight:

• Single Oven : 178.5 lb (81 kg)
• Double Oven : 295 lb (134 kg)

STEP 4 : Make an electrical connection

WARNING

Electrical Shock Hazard

• Grounding through the neutral conductor is prohibited for new branch-circuit installations (1996 NEC); mobile homes; and recreational vehicles, or in an area where local codes prohibit grounding through the neutral conductor. For installations where grounding through the neutral conductor is prohibited, see the Ungrounded Neutral graphic. Use a grounding terminal or lead-to-ground unit.
• Connect a neutral terminal or lead to branch circuit neutral in the usual manner.
• Failure to do so could result in death, fire or electric shock.

WIRE CABLE FROM HOME POWER SUPPLY

• Connect to the House’s Electrical Supply
• IMPORTANT : Use the 3-wire cable from the home power supply where local codes permit a 3-wire connection.

1. Disconnect power.
2. Connect the 2 black wires together using a UL-listed wire connector.
3. Connect the neutral (white) wire and the ground (green or bare) wire (of the range cable) using a UL-listed wire connector.
4. Connect the 2 red wires together using a UL-listed wire connector.
5. Install junction box cover.

WIRE CABLE FROM HOME POWER SUPPLY

Connect To The House Electrical Supply – U.S.A. Only
IMPORTANT : Use the 4-wire cable from a home power supply in the U.S. where local codes do not allow grounding through neutral, new branch circuit installations (l99e NEC), mobile homes and recreational vehicles, new construction and in Canada.

1. Disconnect power
2. Connect the 2 black wires b together using a UL-listed wire connector.
3. Connect the 2 red wires c together using a UL-listed wire connector.
4. Untwist white wire from green (or bare) ground wire coming from the oven.
5. Connect the 2 neutral (white) wires h together using a UL-listed wire connector.
6. Connect the ground (green or bare) wire f from the oven cable to the ground (green or bare) wire (in the junction box) using a UL-listed wire connector.
7. Install junction box cover

STEP 5: Mount the oven

1. Slide the oven completely into the cabinet until the back surface of the front frame touches the front wall of the cabinet. Center the oven within the cabinet cutout.
   • NOTE : Push against seal area of the oven front frame when pushing the oven into the cabinet. Do not push against the outside edges.
2. There are four holes, two on each side of the front frame that surround the oven cavity. Drill 1/8” (3.18 mm) pilot holes through the holes, and into the front wall of the cabinet.
3. Insert the # 8–14 x 1” screws (provided) through the pilot holes to securely fasten the oven to the cabinet. Do not over-tighten screws.
4. Replace the rack and reconnect the power to the oven.

STEP 6: Replace the door (if necessary)

IMPORTANT : The oven door is heavy and fragile, and the door front is glass. To avoid oven door glass breakage, use both hands and grasp only the sides of the oven door to remove it.

1. Verify that the door hinge latches are forward, and then insert the oven door hinges into the openings.

2. Lower the oven door to engage the hinges.

3. Press the hinge latches down to lock.
   STEP 7: Complete installation

   • 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.
   • 2. Dispose/recycle of all packaging materials.
   • 3. Start using the oven with the operation details in the following chapter

Operating Instructions

Clean

Use the Clean mode to clean the oven interior regularly. The working temperature is 500°F, and the working time is 1 hour. No need to remove the baking racks. Any soil is burned off by the intense heat.

1. Turn the Oven function knob to Clean.
2. Turn the Temperature control knob to the max position, the indicator light will on.
3. The upper heat elements and lower heat elements will turn on and off automatically until turn the knobs to OFF position.
   • Tips : When the cleaning is finished, allow to cool until safe, wipe a damp cloth, then dry. This process softens the soil for faster removal.

Digital Display

When you first plug in the range or power has returned, you will see 88:88 in the display and hear an alarm tone.

Timer

• Press the TIMER to enter the setting. The display will show 03:00. Adjust the hour by pressing the UP or DOWN buttons (00-24), when done, press the TIMER and repeat the steps for the minutes (00-59). To confirm the setting simply press the TIMER again or wait approximately 5 seconds. To stop the TIMER setting, just hold the TIMER for 3 seconds. BSous Vide

• Step 1 : Press the TEMPERATURE to start the sous vide function setting. The display will show 104ºF. Adjust the temperature by pressing the UP or DOWN buttons (104ºF-212ºF), when done, press the TEMPERATURE again or wait approximately 5 seconds to confirm the temperature setting.

• Step 2 : Press the TIMER to set the cooking time. The display will show 03:00. Adjust the hour by pressing the UP or
  DOWN buttons (00-24), when done, press the TIMER and repeat the steps for the minutes (00-59). To confirm the setting simply press the TIMER again or wait approximately 5 seconds.

• Step 3 : Press START to enter the sous vide function. The oven heat element and the fan will work together, with a display showing the left time and oven’s real-time temperature every 5 seconds. When the oven is under sous vide cooking mode, repeat the step 1 and step 2 to adjust the temperature or time if needed. Press START to enter the sous vide function again. To exit the sous vide function, just hold the START for 3 seconds.

  • Note : Always to adjust the temperature in priority in order to use the sous vide function. Adjusting the timer before adjusting the temperature won’t lead the sous vide function to work.

Clock

Press the CLOCK for approximately 3 seconds to enter the setting. The display will show 12:00. Adjust the hour by pressing the UP or DOWN buttons (01-12), when done, press the CLOCK and repeat the steps for the minutes (00-59). To confirm the setting simply press the CLOCK again or wait approximately 5 seconds.

Other Function:

1. Press and hold on the UP or DOWN button can speed up the setting.
2. When proceed with sous vide function, simultaneously press the UP and DOWN buttons together can shift the temperature between ºF and ºC.
3. Press and hold on the POWER button for 3 seconds to enter the child lock function, and hold on the POWER button for another 3 seconds to turn off the child lock function.

Attention

The sous vide cooking can not be worked together with the regular cooking mode. Any knob is turned on, the sous vide function can not be used. The regular cooking also can not be used when the sous vide function is working.

Care and Maintenance

Troubleshooting

Check troubleshooting before you call for service.

Wire Diagram

Warranty

What this limited warranty covers:

The Warranty coverage provided by Forno Appliances in this statement applies exclusively to the original Forno appliance (“Product”) sold to the consumer (“Purchaser”) by  an authorized Forno dealer/distributor/retailer, purchased and installed in the United States or Canada, and which has always remained within the original country of purchase (the United States or Canada). Warranty coverage is activated on the date of the Product’s original retail purchase and has a duration of two (2) years.

Warranty coverage is non-transferable. In the event of the replacement of parts or of the entire product, the replacement Product (or parts) shall assume the remaining original Warranty activated with the original retail purchase document. This Warranty shall not be extended with respect to such replacement. Forno Appliances will repair or replace any component/part which fails or proves defective due to materials and/or workmanship within 2 years of the date ofthe original retail purchase and under conditions of ordinary residential, non-commercial use. Repair or replacement will be free of charge, including labor at standard rates and shipping expenses. The purchaser is responsible for making the product reasonably accessible for service. Repair service must be performed by a Forno Authorized Service company during normal working hours.

Important

Retain proof of original purchase to establish warranty period. Forno’s liability on any claim of any kind, with respect to the goods and/or services provided, shall in no event exceed the value of the goods or service or part there of which has given rise to the claim.

30-Day Cosmetic Warranty

The Purchaser must inspect the product at the time of delivery. Forno warrants that the Product is free from manufacturing defects in materials and workmanship for  a period of thirty (30) days from date of the original retail purchase of the Product.

This coverage includes:

• Paint blemishes
• Chips
• Macroscopic finish defects

Cosmetic warranty does NOT cover:

• Issues resulting from incorrect transport, handling and/ or installation (e.g.: dents, broken, warped or deformed structures or components, cracked or otherwise damaged glass components);
• Slight color variations on painted/enameled components;
• Differences caused by natural or artificial lighting, location or other analogous factors; > stains/corrosion/ discoloration caused by external substances and/ or environmental factors; > labor costs, display, floor, B-stock, out-of-box,“as is” appliances and demo units.

How to receive service

To receive warranty services, the Purchaser must contact the Forno Support department in order to determine the problem and the required service procedures. Troubleshooting with a customer service representative will be necessary before moving forward with the service. The model number, serial number and date of original retail purchase will be requested.

Warranty Exclusions: What Is Not Covered.

• Use of the Product in any non-residential, commercial application.
• Use of the Product for anything other than its intended purpose.
• Repair services provided by anyone other than a Forno Authorized Service agency.
• Damages or repair services to correct services provided by unauthorized parties or the use of unauthorized parts.
• Installation not in accordance with local/state/city/county fire codes, electrical codes, gas codes, plumbing codes, building codes, laws or regulations.
• Defects or damage due to improper storage of the Product.
• Defects, damage or missing parts on products sold out of the original factory packaging or from displays. > Service calls or repairs to correct an incorrect installation of the Product and/or related accessories.
• Replacement of parts/service calls to connect, convert or otherwise repair the electrical wiring and/or gas line in order to properly use the product.
• Replacement of parts/service calls to provide instructions and information on the use of the Product.
• Replacement of parts/service calls to correct issues arising from the product being used in a manner other than what is normal and customary for residential use.
• Replacement of parts/service calls due to wear and tear of components such as seals, knobs, pan supports, shelving, cutlery baskets, buttons, touch displays, and scratched or broken ceramic-glass tops.
• Replacement of parts/service calls for lack of/improper maintenance, including but not limited to : the build-up of residues, stains, scratches, discoloration, and corrosion.
• Defects and damages arising from accidents, alteration, misuse, abuse or improper installation.
• Defects and damages arising from Product transport, logistics and handling. Inspection of the product must be made at the time of delivery. Following receipt and inspection, the selling dealer/delivery company must be notified of any issues arising from handling, transport and logistics.
• Defects and damages arising from external forces beyond the control of Forno Appliances, including but not limited to wind, rain, sand, fires, floods, mudslides, freezing temperatures, excessive moisture or extended exposure to humidity, power surges,
• Lightning, structural failures surrounding the appliance and other acts of God.
• Products whose serial number has been altered/ damaged/tampered with. In no case shall Forno be held liable or responsible for damage to surrounding property, including furniture, cabinetry, flooring, panels, and other structures surrounding the Product. Forno is neither liable nor responsible for the Product if it is located in a remote area or an area where certified trained technicians are not reasonably available. Purchaser must bear any transportation and delivery costs of the
• Product to the nearest Authorized Service Center or the additional travel expenses of a certified trained technician

Warranty

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON FORNO. FORNO SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, TIME AWAY FROM WORK, MEALS, LOSS OF FOOD OR BEVERAGES, TRAVELING OR HOTEL EXPENSES, EXPENSES TO RENT OR PURCHASE APPLIANCES, REMODELING/CONSTRUCTION EXPENSES IN EXCESS OF DIRECT DAMAGES WHICH ARE UNDENIABLY CAUSED EXCLUSIVELY BY FORNO OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF FORNO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OFANY KIND AGAINST FORNO BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY FORNO AND CAUSING THE ALLEGED DAMAGE. WITHOUT PREJUDICE TO THE FOREGOING, THE PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO THE PURCHASER AND THE PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT SOLD BY FORNO THAT IS NOT A DIRECT RESULT OF NEGLIGENCE ON THE PART OF FORNO THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NON-TRANSFERABLE, AND STATES YOUR EXCLUSIVE REMEDY.

WARNING : This product can expose you to chemicals including [Lead & Lead Compounds], which is [are] known to the State of California to cause cancer, birth defects and/or reproductive harm. To minimize exposure to these substances. Always operate this unit according to the Owner’s Manual, and ensure that you provide proper ventilation. For more information go to www.P65Warnings.ca.gov

This symbol on the product or in its packing indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service, or the shop where you purchased the product.

To avoid contamination of food, please respect the following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Clean regular surfaces that can come in contact with food and accessible drainage systems.
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream, and making ice cubes.
• One-, two- and three-star compartments are not suitable for the freezing of fresh food.

Customer Care

Thank you for purchasing a Forno product. Please read the entire instruction manual before operating your new appliance for the first time. Whether you are an occasional user or an expert, it will be beneficial to familiarize yourself with the safety practices, features, operation and care recommendations of your appliance.

Both the model and serial number are listed inside the product. For warranty purposes, you will also need the date of purchase .

Record this information below for future reference.

Product Information

Model Number: ……………

Serial Number: …………….

Date of Purchase: ………………

Purchase Address And Phone: ……………….

Service Information

Use these numbers in any correspondence or service calls concerning your product If you received a damaged product, immediately contact Forno.
Check the troubleshooting guide before you call for service. It lists the causes of minor operation problems that you can correct yourself.

Services in Canada and United States

Keep the instruction manual handy to answer your questions. You can also find all the information you need on-line at www.forno.ca.
If you don’t understand something or need more assistance, please visit our website or email: info@forno.ca
If there is a problem, please contact FORNO customer service. Please note that troubleshooting with a customer service representative will be needed before being able to send a service provider. All warranty work needs to be authorized by FORNO customer service. All our authorized service providers are carefully selected and rigorously trained by us.

FAQS

Q: Where can I find the model and serial number of my oven?

A: The model and serial numbers are located inside the product. Refer to the manual for detailed instructions on locating this information.

Q: What should I do if I receive a damaged product?

A: Immediately contact Forno for assistance. Do not attempt touse a damaged product.

Q: How should I clean the oven?

A: Use a mild detergent and water to clean the oven interior.Avoid using harsh chemicals that may damage the surfaces.

References

• www.ca.gov | California State Portal
• P65Warnings.ca.gov
• FORNO® | A new era of kitchen appliances
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>