dellonda DH26 Adjustable Single Monitor Arm User Guide
- June 1, 2024
- dellonda
Table of Contents
dellonda DH26 Adjustable Single Monitor Arm
Product Information
Specifications:
- Supported VESA: Quick Release Vesa Plate For 17-36 Screens
- Supported Screen Size: 17-36 inches
- Load Capacity: Not specified
- Tilt Range: Adjustable
- Installation: Clamp or Bolt
Product Usage Instructions
Safety Instructions:
Ensure the spring in the upper arm is adjusted properly each month.
Installation With Clamp:
Use the plastic cover/cable tidy to cover the clamp and manage the cables.
Installation With Bolt:
Follow the instructions in Fig.3 for installation.
Attaching The VESA Plate:
Refer to Fig.4 for proper attachment.
Attaching The Monitor:
Follow the guidelines in Fig.5 for attaching the monitor securely.
Attaching And Using The Inbuilt Cord Management:
Refer to the product manual for instructions on using the inbuilt cord
management feature.
FAQ:
-
Q: What is the load capacity of the monitor arm?
A: The load capacity is not specified in the provided information. Please refer to the product manual or contact Dellonda support for specific details. -
Q: How do I dispose of the product in an environmentally friendly way?
A: When disposing of the product, recycle unwanted packaging materials and follow local waste regulations for disposal. Drain any fluids into approved containers if applicable.
Important Information
Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.
Contents
About the Product
Adjustable single monitor arm creates a more ergonomic workspace. Features
quick release VESA plate making the mounting process quick and simple. Monitor
arm easily adjusts using gas spring system. Features 360° rotation enabling
you to convert your display orientation from landscape to portrait. Features
cable management system ensuring a tidy desk.
Safety Instructions
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from small children.
- Ensure instructions are read and completely understood before attempting installation. If unsure contact a professional installer for assistance.
- The desk/mounting surface must be capable of supporting the combined weight of the mount and the display. Otherwise the structure must be reinforced.
- Never exceed the max. load of 9kg.
- Safety gear (safety shoes) and proper tools must be used.
- A minimum of 2 people are required for this installation. Failure to use safety equipment can result in property damage, serious injury or death.
- Check fixings for tightness every 2 months.
- Note: this product is intended for indoor use only.
- WARNING! This product contains high pressure gas spring parts. Do not put into a fire, high temperature or disassemble it.
- To ensure the sealing performance of the gas spring the upper arm (with the spring) should adjusted properly each month.
Preparation Before Assembly
- Make sure the VESA holes 100 x 100 mm or 75 x 75 mm in the monitor (fig.1).
- Remove the original fixed base of monitor.
ASSEMBLY INSTRUCTION
Installation With Clamp (Fig.2)
- For table thickness: 20-100mm.
- Select right holes according to the thickness of the desk.
- If using the clamp to attach to the desktop. Use the plastic cover/cable tidy to cover the clamp and manage the cables.
Installation With Bolt (Fig.3)
- For table thickness: 25-90mm
Attaching The VESA Plate
- Use the correct size washers (fig.4.D) for your monitor.
- The VESA plate must be orientated correctly to work, see fig.4.
Attaching The Monitor (Fig.5)
- Once you have attached the VESA plate to the screen (fig.4). Slide the screen into place on the monitor arm making sure not to let the monitor drop onto the desktop.
- To adjust the monitor use the supplied 5×5 Allen key (F)
- Adjust the monitor height after installing. If the monitor keeps dropping, use the supplied 5×5 Allen key to adjust the screw on the arm in “-” direction.
- If the monitor cannot be lowered use the supplied 5×5 Allen key to adjust the screw on the arm in “+” direction.
- Make the resistance of the arm equal to the weight of the monitor.
Attaching And Using The Inbuilt Cord Management
- Fig.7 Remove cover from top arm by gently pulling until it comes away.
- Fig.6.8 use cable tie to secure cables in the arm.
- To remove the cable tidy from the lower arm remove the screw.
Specifications
- Supported VESA: 75 x 75, 100 x 100mm
- Supported Screen Size: 17-36”
- Load Capacity: 3-12kg
- Tilt Range: -90 – 15°
- Installation: Clamp & Grommet
Environment Protection and Waste Protection and Electrical Equipment
Regulations (WEEE)
Recycle unwanted packaging materials. When this product is no longer required,
or has reached the end of it’s useful life, please dispose of it in an
environmentally friendly way. Drain any fluids (if applicable) into approved
containers, in accordance with local waste regulations. Under the Waste
Batteries and Accumulators Regulations 2009, Dellonda would like to inform the
user that this product contains one or more batteries. It is our policy to
continually improve products and we reserve the right to alter data,
specifications and parts without prior notice. No liability is accepted for
incorrect use of this product. Guarantee is 12 months from purchase date,
proof of which is required for any claim.
Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
- 01284 757575
- support@dellonda.co.uk
- www.dellonda.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>