dellonda DH64 Stand White Workstation Desk Frame Instruction Manual

: May 15, 2024
: dellonda

Table of Contents

Thank you
Important Information
Contents
Parts List
Product Description
Specification
About the Product
Safety Instructions
Assembly
Operation
Troubleshooting
Customers Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dellonda DH64 Stand White Workstation Desk Frame

Thank you

Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

Important Information

Please read these instructions carefully and note any safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.

Parts List

No.	Part	Qty
1

Parts List Pedestal

| 2
2|

Parts List Left Column

| 1
3|

Right Column

| 1
4|

Parts List Supporting beam

| 4
5|

Transmission rod

| 1
6|

Supporting plate

| 1
7|

Adapter

| 1
8|

Baffle

| 2
9|

Power cable

| 1
10|

cable tie

| 1
11|

Parts List Adaptor hodler

| 1
12|

Handset

| 2
13|

Switch cord

| 1
14|

Control Box

| 1

Product Description

Specification

Height range : 710-1210mm
Horizontal adjustment: 850-1290mm
Speed: 25mm/s
Max. load capacity: 70kg
Sound level: 50dB
Supply: 230V
Minimum Desktop Dimensions (W x D): 900 x 500mm
Maximum Desktop Dimensions (W x D): 1400 x 700mm

About the Product

Height-adjustable desk frame creates the possibility of a sitting or standing working environment. Single motor system ensures a fast and stable adjustment. Features ultra-quiet operation with sound level less than 50dB. Range of four desktop designs available; Model No’s. DH19, DH20, DH21, DH22.

Safety Instructions

ELECTRICAL SAFETY
WARNING! It is the user’s responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical products.
Electrical safety information. It is important that the following information is read and understood:
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the correct fuse.
DO NOT pull or carry the appliance by the power cable.
DO NOT pull the plug from the socket by the cable.
DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is replaced immediately by a qualified electrician.
If the cable or plug is damaged during use, switch off the electricity supply and remove from use.
Ensure that repairs are carried out by a qualified electrician.
ALWAYS make sure there are no hazards in the operating environment. e.g., nothing that will get hooked up on the desk, or stop the desk from raising or lowering fully.
Unplug the power source before cleaning. Wipe the dust on surface with slight damp cloth when cleaning, DO NOT get water in the electrical housing, and be careful not to loosen any cables.
The electrical housing contains electronic components, metals, plastics, wires etc., dispose of in accordance with environmental legislation, not the general household waste.
Check carefully to ensure correct and complete assembly before use.
Familiarise yourself with all functions and program settings of the product before first use.
DO NOT let Children play on the product
Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect on the use of the equipment.
DO NOT clean the unit with corrosive or abrasive materials.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, it’s service agent or a similarly qualified person in order to avoid a hazard and prolong the life of the equipment.
Keep the original instructions, for future reference.
ALWAYS inspect the unit prior to use for fatigue and damage. Professional repair only

Assembly

Step 1

Install pedestal (1)

Assembly

Step 2

Install supporting beam (4)

Assembly

Step 3

Install transmission rod (5)

Assembly

Step 4

Install supporting plate (6)

Assembly

Step 5

Assembly

Step 6-1

Assembly

Step 6-2

Assembly

Step 7

Assembly

Operation

Press UP or DOWN button to raise or lower height of the desk.
RESET
To reset the desk height to its default position whilst at its lowest or highest position, press and hold the up or down button for 5 seconds.
LIFTING / LOWERING
To adjust the height of the desk use the up and down arrows.
If the buttons are held for more than 1.2 seconds automatic mode will be engaged. Press either button to stop the movement.

Troubleshooting

FAULT	SOLUTION

No response whilst pressing the up/down button after mains supply is connected|

Check if mains supply is connected
Contact Dellonda

Desktop will not respond|

Check if it is overloaded (70kg max.)
Contact Dellonda

Overworked (Duty cycle: max. 2 min. on 30 mins off|

Leave to rest for 30 mins.
Contact Dellonda

Environment Protection, Waste Electrical and Waste Electronic Equipment Regulations (WEEE)

Recycle unwanted packaging materials. When this product is no longer required, or has reached the end of its useful life, please dispose of in an environmentally friendly way. Drain any fluids (if applicable) into approved containers, in accordance with local waste regulations. It is our policy to continually improve products and we reserve the right to alter data, specifications and parts without prior notice. No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim.