dellonda DG66 Chester Rattan Outdoor Dining Table Instructions

: May 15, 2024
: dellonda

Table of Contents

dellonda DG66 Chester Rattan Outdoor Dining Table
Product Information
Product Usage Instructions
Contents
Assembly
STORAGE
Warranty:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dellonda DG66 Chester Rattan Outdoor Dining Table

dellonda-DG66-Chester-Rattan-Outdoor-Dining-Table-product-
image

Product Information

Specifications

Product: Dellonda Chester Rattan Outdoor Dining Table
Model No.: DG66
Material: Premium quality PE weave rattan
Features: UV treated, fade-resistant, weatherproof, 5mm clear tempered glass table top, parasol/umbrella hole
Disclaimer: Colors may vary slightly due to lighting conditions

Product Usage Instructions

Safety Instructions
Avoid prolonged exposure to the sun. Use the product correctly and with care for its intended purpose to prevent damage or personal injury. Keep the product clean and well-maintained.

Assembly

Identify the components listed in the contents section of the manual.
Follow the assembly sequence provided in the manual.
Use the included tools (hex key, spanner) for assembly.
Ensure all bolts, nuts, and washers are securely fastened.
Once assembled, place the table on a flat surface in your desired outdoor location.

Storage
When not in use, store the product in a clean, dry environment to prolong its lifespan. Cover the table when not in use to protect it from dust and debris. Avoid storing it in direct sunlight for extended periods.

Environment Protection and Waste Disposal
Recycle packaging materials and dispose of the product in an environmentally friendly manner when no longer needed. Drain any fluids into approved containers following local waste regulations.

Manufacturer Information
Dellonda Limited
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

Phone: 01284 757575
Email: support@dellonda.co.uk
Website: www.dellonda.co.uk

FAQ

Q: Can this outdoor dining table be left outside all year round?
A: Yes, the table is designed to be weatherproof and can be used outside throughout the year. However, it is recommended to cover it when not in use to protect it from dust and debris.
Q: What is the warranty period for this product?
A: The warranty for this product is 12 months from the purchase date. Proof of purchase is required for any warranty claims.

Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

Important Information
Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.

Refer to instruction manual

About the Product
Manufactured using premium quality PE weave rattan material. UV Treated, fade resistant and weatherproof design can be used outside all year round. Easy to clean 5mm clear tempered glass table top. Features parasol/umbrella hole. Disclaimer: Colours may slightly vary due to lighting conditions. Material: Polyurethane Rattan.

SPECIFICATION

Model no: ……………………………………………………………………………….. DG66
Table dimensions (Ø x H): ……………………………………………. Ø110 x 74cm
Material: …………………………………………………………… Polyurethane Rattan

Safety Instructions

Always read these instructions fully before assembling and using your furniture.
WARNING: Keep all flame and heat sources away from this furniture.
DO NOT use bleach, alkaline or harsh detergents for cleaning. Soap and warm water are recommended.
DO NOT use a high-pressure washer to clean this product.
This product has a reasonable level of protection against UV degradation, however as with any material it will begin to fade and degrade after long periods of exposure to the sun.

Assembly

Carefully turn the table top (A) onto it’s face, position the two legs (B) and bolt in place using the M6 x 20mm bolts (E) and M6 steel washers (G).
Offer up the two table base infill panels (C) into the table base legs (B), assemble using the illustrated nut a bolt sequence to secure. Pass a steel washer (G) onto the M6 x 35mm bolt (D) then pass this through the two tabs trapping a plastic washer (H) in between, then push on another M6 steel washer (G) and secure with an M6 nut (F), cover the bolt head by pushing the plastic bolt cap (I).
Repeat this sequence for the other seven connecting positions.
It may be useful to only tighten the bolts for all eight locations at the end of the assembly sequence.
Turn the table assembly onto its feet and carefully lift into position the glass table top (J).
Push the parasol insert (K) through the glass top (J) and table top (A) and screw the nut back on from the underside to secure in place.

STORAGE

Ensure that the table is clean dry before being stored in a cool, dry and well ventilated location.
Wipe down the table’s frame and legs and any areas that could have been exposed to mud and dirt.
Store the table during long periods of not being used prolong the usable life of all parts.

Environment Protection and Waste Protection and Electrical Equipment Regulations (WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or has reached the end of it’s useful life, please dispose of it in an environmentally friendly way. Drain any fluids (if applicable) into approved containers, in accordance with local waste regulations. It is our policy to continually improve products and we reserve the right to alter data, specifications and parts without prior notice. No liability is accepted for incorrect use of this product.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important: No Liability is accepted for incorrect use of this product.