FORTYFOUR Altitune Wireless Speaker User Manual
- June 15, 2024
- FORTYFOUR
Table of Contents
Altitune Wireless Speaker
User Manual
Specs
Playtime: ………………….. Approx. 9 hours (@ 50-60% volume)
Input Power: …………………. DC 5V/1A
Output Power: …………………. 5W x 2
Battery: …………………. 3.7 V 1000 mAh
Charing Time: ………………….. Approx. 2-3 hours
Range: …………………. up to 30 ft.
- Power Button
- LED Indicator Light
- USB-C Charging Port
Functions
- Power Button
Power ON/OFF| Press once
---|---
Pairing:| Hold 2 seconds
TWS ON:| Press 3 times
TWS OFF:| Press 5 times
Play/Pause| Press 2 times
Reset| Hold 8 seconds - LED Indicator Light
Pairing:| White flashing light
---|---
Paired:| Solid white light
TWS ON:| Blue flashing light
Charging:| Solid orange light
Fully Charged:| Solid green light
Wireless Connection
Turn on the speaker
Open wireless pairing menu on your wireless device.
Select “Altitune Speaker” and pair
Note: If the speaker is not paired to any device for 15 minutes, it will
shut off.
When the battery is low, a voice prompt will indicate this and the speaker
will power off automatically.
Safety
- Keep product away from extreme temperatures
- Avoid liquid immersion of this product
- Do not attempt to disassemble, repair, or modify the device
- Do not use concentrated chemical products or detergents to clean this product
- Use only 5V/1A power supply. Connecting the power supply to a voltage that is too high may cause serious damage
- The speaker may become warm while charging, this is normal
- Do not expose to fire or high temperature
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>