dellonda DH25 Double Monitor Arms Installation Guide
- June 1, 2024
- dellonda
Table of Contents
Dellonda Adjustable Dual Monitor Arms,
360° Rotation 9kg Capacity for 10-27” Screens
Model No. DH25
Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
Important Information
Please read these instructions carefully. Note the safe operational
requirements, warnings & cautions.
Use the product correctly and with care for the purpose for which it is
intended. Failure to do so may cause damage and/or personal injury and will
invalidate the warranty. Keep these instructions safe for future use.
Contents
| 1 | Bottom support 1 | 1 PCS | 1 |
|---|---|---|---|
| 2 | Screw | 1 PCS | |
| 3 | Washer | 1 PCS | |
| 4 | Butterfly knob | 1 PCS | |
| 5 | Bottom support 2 | 1 PCS | 2 |
| 6 | Knob | 1 PCS | |
| 7 | Cable cover 1 | 1 PCS | 3 |
| 8 | Nylon ties | 1 OPCS | |
| 9 | Anti-slip rubber 1 | 1 PCS | |
| 10 | Anti-slip rubber 2 | 4PCS | |
| 11 | Anti-slip rubber 3 | 1 PCS | |
| 12 | Cable cover 2 | 2PCS | |
| 13 | M6 box wrench | 1 PCS |
About
the Product
Adjustable double monitor arms create a more ergonomic workspace. Monitor arms
easily adjusts using gas spring system. Features 360° rotation enabling you to
convert your display orientation from landscape to portrait. Features cable
management system ensuring a tidy desk.
Safety Instructions
- This product contains small items that could be a choking hazard if swallowed. Keep theseitems away from small children.
- Ensure instructions are read and completely understood before attempting installation. If unsure contact a professional installer for assistance.
- The desk/mounting surface must be capable of supporting the combined weight of the mount and the display. Otherwise the structure must be reinforced.
- Never exceed the max. load of 9kg.
- Safety gear (safety shoes) and proper tools must be used.
- A minimum of 2 people are required for this installation. Failure to use safety equipment can result in property damage, serious injury or death.
- Check fixings for tightness every 2 months.
- Note: this product is intended for indoor use only.
- WARNING! This product contains high pressure gas spring parts. Do not put into a fire, high temperature or disassemble it.
- To ensure the sealing performance of the gas spring the upper arm (with the spring) should adjusted properly each month.
Preparation Before Assembly
- Make sure the VESA holes 100 x 100 mm or 75 x 75 mm in the monitor (fig.1).
- Remove the original fixed base of monitor.
Installation With Clamp (Fig.2)
- For table thickness: 20-100mm.
- Select right holes according to the thickness of the desk.
Installation With Bolt (Fig.3)
- For table thickness: 25-90mm
Use the correct size washers (fig.4.E) for your monitor.
Attaching The Monitor (Fig.5)
- To adjust the monitor use the supplied 5×5 Allen key (G)
- Adjust the monitor height after installing. If the monitor keeps dropping, use the supplied 5×5 Allen key to adjust the screw on the arm in “-” direction.
- If the monitor cannot be lowered use the supplied 5×5 Allen key to adjust the screw on the arm in “+” direction.
- Make the resistance of the arm equal to the weight of the monitor.
Attaching And Using The Inbuilt Cord Management
- Fig.7.12 Remove cover from top arm by gently pulling until it comes away.
- Fig.6.8 use cable tie to secure cables in the arm.
- To remove the cable tidy from the lower arm remove the screw (fig.7).
- If using the clamp to attach to the desktop. Use the plastic cover/cable tidy to cover the clamp and manage the cables (fig.7.7).
Specifications
| Supported VESA: | 75 x 75, 100 x 100mm |
|---|---|
| Supported Screen Size: | 10-27” |
| Load Capacity: | 2-9kg |
| Tilt Range: | -85 – 15° |
| Installation: | Clamp & Grommet |
Environment Protection and Waste Protection and Electrical Equipment
Regulations (WEEE)
Recycle unwanted packaging materials. When this product is no longer required,
or has reached the end of it’s useful life, please dispose of it in an
environmentally friendly way. Drain any fluids (if applicable) into approved
containers, in accordance with local waste regulations. Under the Waste
Batteries and Accumulators Regulations 2009, Jack Sealey would like to inform
the user that this product contains one or more batteries. It is our policy to
continually improve products and we reserve the right to alter data,
specifications and parts without prior notice.
No liability is accepted for incorrect use of this product. Guarantee is 12
months from purchase date, proof of which is required for any claim.
Dellonda Limited
Kempson Way, Suffolk Business
Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757575
[email protected]
****www.dellonda.co.uk