OOQE S9 Pro Bluetooth Speaker User Guide
- June 1, 2024
- OOQE
Table of Contents
Bluetooth Speaker
S9 Pro
Nothing but amazing bass.
Quick Start Guide
TOUCH KYE
| |
---|---|---
Short press to switch sound effects
Long press on/off| Short press to switch audio source
Long press TWS pairing| Devpat Audio ndicator Light
| |
Short press play/pause answer
Long press to reject, double click to disconnect| Short press to adjust volume
Long press to switch up and down tracks| Red : Treble Audio
Green: Bass Audio
Blue : 3D Audio
BUTTON
| AUX
---|---
| USB Type-( Charge Port
| Play MP3/WMA/WAV/FLAC/APE music files from Micro SD card
| Devpat Audio Indicator Light
CHARGING
USB Audio
Turn on the S9 Pro , and connect the Type-C cable attached to the USB
interface of the PC. And then there will be “USB speaker” prompt tone. Make
sure connect the cable after turn on the S9 Pro , or it will prompt” USB mass
storge” .
Charge: The red LED will be on when charging and once fully charged the red
LED turns off. It takes about 3-4 hours to fully charge.
BT Connection
Activate the BT settings on your smart phone or other devices, then search and
connect the speaker S9 Pro . Enter “0000” if a password is needed. The speaker
will automatically turn off if no audio input for 30 minutes.
True Wireless Stereo
Operation steps of True Wireless Stereo
- Turn off the BT function of phone, and then turn on the two sets of S9 Pro .
- Double click the M switch button of any one set quickly, prompt tone will be emitted and the audio indicator light flashes and then will be normally on when the two sets of S9 Pro enter the TWS mode.
- Initiate BT function of phone, and connect the S9 Pro . Enjoy the true stereo effect which the left & right channels are independently.
Mark: The speakers will automatically enter the TWS mode when they are turned on again. And it will be out of the TWS mode when double press the M switch button again.
WIRED CONNECTION
Connect the 3.Smm audio cable attached to the aux interface of devices, such
as mobile phone, PC or TV.
Warranty
The Warranty Information:
- If a malfunction or a damage occurs due to quality issues, please take the product to sales agency. Since the date of purchase, the warranty is valid for 1 year.
- Damages due to unauthorized disassembly or inappropriate usage of the users not under warranty.
- For your interest, keep this card without altering .
Important Notice:
In order to safeguard your legal rights and interests, please fill out
clearly, avoid alternation and keep the warranty card safely. Please contact
local supplier or manufacturer for any inquiries.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
ISED Statement
This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 0cm
between the radiator & your body.