logitech ZONE 300 Wireless Bluetooth On-ear Headset Microphone User Guide

logitech ZONE 300 Wireless Bluetooth On-ear Headset Microphone

Product Usage Instructions

• Press the power button once to power on the headset.
• Once powered on, the LED light will turn white.
• There will be a voice prompt that tells you the battery status.
• Press and hold the power button for 2 seconds to enter pairing mode.
• Repeat if you want to pair with another device (up to 8 devices).
• You can connect to 2 devices simultaneously.
• Slide the earcups up and down the headband until they sit comfortably on your ears.
• Adjust the microphone boom until it is leveled with your mouth for better voice capture.
• Flip up or down the mic boom to mute or unmute.
• Voice prompts will indicate whether the microphone is muted or unmuted.
• Plug one end of the USB-C charging cable into the earcup and the other end into a power source.
• The LED light will breathe when charging and turn solid white when fully charged.
• A 5-minute charge gives up to 1 hour of talk time; a full charge takes around 2 hours.

Take control of your music and meeting experience with Logi Tune. Adjust the sidetone, mic level, and EQ using the Logi Tune app for Logitech headsets. Update software and firmware periodically for optimal performance.

Your headset will auto-power off after 30 mins of inactivity. Adjust the sleep timer in Logi Tune. Press the power switch to wake up the headset.

FAQ

• Q: How do I know if my headset is fully charged?
• A: The LED light will turn solid white when fully charged.
• Q: How many devices can I pair with simultaneously?
• A: You can pair with up to 8 devices and connect to 2 devices simultaneously.

KNOW YOUR PRODUCT

WHAT’S IN THE BOX

1. Zone 300
2. USB-C charging cable
3. User documentation

POWER ON/OFF

1. Press the power button once to power on the headset.
2. Once powered on, the LED light will turn white.
3. There will be a voice prompt that tells you the battery status1.

CONNECTING YOUR HEADSET

1. Long press the power button on the earcup until the LED indicator starts blinking to initiate Bluetooth® pairing.

2. In your computer or mobile device’s Bluetooth® settings, select “Zone 300” in discoverable devices.
   If you are using Windows 10 or later, a notification will pop up when you place the headset close to your computer. Click “Connect”.

3. Repeat steps 1 and 2 if you want to pair with another device. You can pair with a maximum of 8 devices and connect to 2 devices simultaneously.

ADJUSTING FIT

1. It may be easier to adjust the headsets on your head. Slide the earcups up and down the headband until they sit comfortably on your ears.
2. Move the microphone boom up or down until it is levelled with your mouth for better voice capture.

MUTING

1. Flip up or down the mic boom to mute or unmute.
2. You will hear voice prompts that indicate whether the microphone is muted or unmuted1.

CHARGING
The LED light on the headset will become red when the battery is lower than 10%.

1. Plug one end of the cable into the USB-C port on the bottom of the earcup and the other end into the USB-C charging port on your computer or a power adapter.
2. The LED light will start breathing when charging.
3. The LED light will turn solid white when fully charged.
   A 5-minute charge will give you up to 1 hour of talk time, and a full charge takes around 2 hours.

The headset can be used with Bluetooth® paired while charging.

CUSTOMIZING WITH LOGI TUNE
Take control of your music and meeting experience with Logi Tune. Adjust the sidetone, mic level, and EQ for your preferred audio experience using the Logi Tune desktop or mobile app for Logitech headsets.
It is also recommended to boost your headset performance with periodic software and firmware updates.

• logitech.com/tune.

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking. In Logi Tune, select the sidetone feature, and adjust the dial accordingly.

• A higher number means you hear more external sounds.
• A lower number means you hear less external sound.

AUTO SLEEP TIMER
By default, your headset will automatically power off when not in use for 30 minutes to conserve battery. Adjust the sleep timer in Logi Tune. To wake up your headset, try pressing the power switch again.

RESET YOUR HEADSET

1. Power the headset on.
2. Press and hold the call button and volume “–” button for 5 seconds.
3. The LED light will quickly blink from red to white 3 times and then turn off when your headset is successfully reset.
4. The headset will turn off after reset.

BUTTON CONTROLS

 | Usage| Button| Action|
---|---|---|---|---

Call controls

| Answer / End call| ****

Call button

| Short press|
Reject call| 1 5 sec press|
Resume call|
Short press|

Volume

| Volume up| “+”| Short press|
Volume down| “-“| Short press|
Connectivity| Bluetooth ® pairing| Power button| 2 sec press|

LED LIGHT INDICATORS

Power

| Power on| Solid
Battery charging| Breathing
Battery fully charged| Solid
Low battery (<10%)| Red

Connectivity

| Bluetooth ® pairing| Blinking
Bluetooth ® connected| Solid
Connection lost| Slow blinking
Factory reset| Fast blink from red to white for three times then turn off

Note: User-triggered behaviours, such as Bluetooth® pairing, will be prioritized; The light indicator will then revert to its previous status once the behavior is completed.

DIMENSIONS

Headset

• Height: 172.84 mm (6.8 in)
• Width: 166.71 mm (6.6 in)
• Depth: 66 mm (2.6 in)
• Weight: 122 g (4.3 oz)

Earpad

• Height: 66 mm (2.6 in)
• Width: 66 mm (2.6 in)
• Depth: 16 mm (0.63 in)

COMPATIBILITY

• Works with Windows, macOS, ChromeOS2, Linux2, iOS, iPadOS, or Android devices via Bluetooth®.
• Compatible with common calling applications.

TECHNICAL SPECIFICATIONS

• Microphone Type: Dual beamforming mics with noise-cancelling algorithms
• Frequency response (Speaker): 50-20 kHz (music mode), 100-7 kHz (talk mode)
• Frequency response (Microphone): 100-7 kHz
• Listening time: Up to 16 hrs3
• Talk time: Up to 20 hrs3
• Bluetooth® version: 5.3
• Wireless range: Up to 30 m / 98 ft4
• Charging cable length: 1 m

FOOTNOTE

1. The headset currently supports voice prompts in the following languages: English, French, German, Italian, Spanish, and Portuguese. You can choose your preferred language in the Logi Tune app.
2. Device basic functions will be supported for operating systems that do not support Logi Tune. Check Logi Tune compatibility on logi.com/tune.
3. Battery life may vary based on user and computing conditions.
4. Open field line of sight. Wireless range may vary depending on the operating environment and computer setup.

© 2024 Logitech. Logitech, Logi, Zone, and the Logitech logo are trademarks or registered trademarks of Logitech Europe S.A. or its affiliates in the U.S. and/or other countries. Windows is a trademark of Microsoft Inc., registered in the U.S. and other countries. Apple, the Apple logo, Mac and iOS are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc. Android, ChromeOS, Google Play and the Google Play logo are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Logitech is under license. USB-C is a trademark of the USB Implementers Forum. All other third-party trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

www.logitech.com/support/zone300.

References

• Logi Tune Software
• Logi Tune Software
• Logitech Support + Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>