ANKER CZ-22 Car Mounted Magnetic Suction Wireless Charging Bracket User Guide

Table of Contents

ANKER-CZ-22-Car-Mounted-Magnetic-Suction-Wireless-Charging-Bracket-
product

Specifications

Package Content

How to Install

Wipe the surface with the wet alcohol wipe and let it dry.
Peel off the 3M tape and stick the Velcro tape to the desired location in your car. Wait for 24 hours.
Bend the holder as needed and attach it to the 3M Velcro tape.

How to Use

For iPhone 15/14/13/12 series with MagSafe

Connect the USB plug to the car charger port and Type-C plug to your holder.
Connect your mobile phone with the wireless charger to start charging. Check the battery display on the phone screen for charging status.

For Use With Non-MagSafe Phones

Clean the back of your phone or case with the wet and dry wipes provided. Use the positioning tool to find the center.
Place the protective film on the center before installing the metal ring.
Attach the metal ring to the center over the protective film.

Attention:

Using a phone case may affect magnetic attraction; consider attaching the metal ring plate to the phone case.
Ensure the surface is clean and dry before applying the 3M Velcro tape.
Avoid excessive bending of the holder; it can withstand up to 300 bends.
Avoid bending the holder at 180 degrees.

Made in China. FCC Compliant.

Q: Can I use this wireless charger with phones other than iPhones?
- A: Yes, this wireless charger is compatible with both iPhone models with MagSafe and non-MagSafe phones. Simply follow the installation instructions provided in the user guide.
Q: How do I know if my phone is charging correctly?
- A: When using an iPhone with MagSafe, you can check the battery display on your phone screen for the charging status. For non-MagSafe phones, ensure proper alignment and attachment of the metal ring for effective charging.
Q: Is it necessary to wait for 24 hours after sticking the Velcro tape in my car?
- A: Yes, it is recommended to wait for 24 hours after applying the Velcro tape to ensure a secure and stable installation in your car.

$ANKER-CZ-22-Car-Mounted-Magnetic-Suction-Wireless- Charging-Bracket-fig $1$$

Please wipe the surface with the wet alcohol wipe and keep it dry before sticking the 3M Velcro tape.
Peel off the 3M tape and stick the Velcro tape to the center console/dashboard/behind of the car monitor, and wait for 24 hours
Bend the holder as you want, stick it on the 3M Velcro tape

For iPhone 15/14/13/12 series with MagSafe

Connect the USB plug to car charger port and Type-C plug to your holder. $ANKER-CZ-22-Car-Mounted-Magnetic-Suction-Wireless-Charging-Bracket-fig $5$$
Connect the mobile phone with the wireless charger to charge. Note that you can know the charging status by the battery display on the phone screen. $ANKER-CZ-22-Car-Mounted-Magnetic-Suction-Wireless-Charging-Bracket-fig $6$$
Charging Status Display: P.S. Please kindly note the branding light is not an indicator light.

For Use With Non-MagSafe Phones:

Clean the back of your phone or case with the provided wet and dry wipes. Then determine the center with the positioning tool
NECESSARY: Stick the protective film on the center before installing the metal ring.
Attach the metal ring to the center, on top of the protective film

Attention:

Use with the phone case will affect the magnetic attraction, you can stick the metal ring plate to the phone cases.
Make sure the surface is clean and dry before you stick the 3M Velcro tape on it.
After you stick the 3M Velcro tape on your car, please wait for 24 hours.
The handle part of holder can withstand 300 bends, please avoid bending too many times in a short period of time.
Please avoid 180-degree bending.