COSMIRROR RM378 LED Shaving Mirror Instruction Manual
- May 15, 2024
- COSMIRROR
Table of Contents
COSMIRROR RM378 LED Shaving Mirror
Product Information
Specifications
- Product Name: LED Shaving Mirror
- Main Materials: ABS/PC
- LED Beads: 56 pieces
- Battery: AAA battery *4 pieces
- Maximum Power: 5.5W
- Product Size: 170mm x 214mm x 119mm
Product Usage Instructions
Safety Instructions
Please DO NOT use any liquid other than water to clean the mirror.
Installation
- Ensure the surface is clean, dry, and free from dust, and oil before installing the adhesive hook.
- Insert four AAA batteries into the mirror.
- Place the mirror into the slot of the adhesive hook.
- Adjust the mirror to any angle needed (360-degree rotation available).
- Adjust the light brightness according to your preference.
Operation
- Press the sensor switch to turn on the LED light.
- Long press the sensor switch to adjust the brightness.
- Press again to turn off the LED light.
- Short press the sensor switch to adjust the color of the LED light (Cool white / Warm white / Nature white).
Maintenance
Use only water to clean the mirror. Do not use any other liquid.
Frequently Asked Questions (FAQ)
Q: Can I use cleaning agents other than water on the mirror?
A: No, please only use water to clean the mirror as using other liquids may damage it.
Q: How do I adjust the brightness of the LED light?
A: Long press the sensor switch to adjust the brightness level according to
your preference.
Q: What type of batteries does the mirror use?
A: The mirror uses four AAA batteries for operation.
Safety Instructions
- Please DO NOT use other liquids to clean the mirror besides water.
- Do not place or store appliances where it can fall or be pulled into a tub or sink. If the appliance falls into water, DO NOT REACH INTO THE WATER.
- Close supervision is necessary when any appliance is used by or near children.
- Do not operate this appliance if the appliance malfunctions or has been damaged in any manner. No repairs should be attempted by the consumer.
- Use the appliance only for intended use as described in this instruction book.
- Be sure the mirror is not in a position where it can reflect sunlight.
- Do NOT expose the product to fire as this may result in explosions and other hazards.
Storage Instructions
- Be sure direct sunlight does not strike the mirror when left unattended.
- Place the mirror in a cool and dry area.
- For safety, please make sure the mirror is out of reach of children.
Specifications
- [Product Name] LED Shaving Mirror
- [Main materials ] ABS/PC
- [LED beads] 56 pieces
- [LED color temperature] 3500K-7000K±500K
- [Battery] AAA battery *4 pieces
- [Maximum power] ≈5.5W
- [Product Size] As shown in the figure
Package List
Illustrate
Instruction
Installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>