Securaco P1 Smart Keypad Instructions

KEYPAD INSTRUCTION

PACKING LIST

MEET THE KEYPAD

INSTALLATION

1. Install keypad
   1. Open the battery cover on the back. 2.Load two AA batteries into the Keypad. Close the battery cover. 3.Screw the bottom screw back. 4. Stick the Keypad on the door.

2. Add Keypad in the app
   2.1 Download the APP by scanning the QR code, or search “Smart Life” on App Store / Google Play. Create a new account or log in with an existing account. https://smartapp.tuya.com/smartlife
   2.3 Select “Auto Scan”, after you find the device, then click “Next”.
   2.4 After the device is added, click “Done”.

3. Bind Keypad to smart lock
   3.1 Select smart lock in the app Click on “ ”
   3.2Click “add” ，Select Keypad ，Click “Bind”.
   3.3 Click “ ”to add password.
   3.4 Kill the APP to break the connection from your phone and lock, so the password can be useful to the lcok.

NOTE| After adding the password, please wait for 30 seconds (or close the APP) to disconnect the phone from the lock, so that the password can be effectively used.
---|---
After you replaced the battery, the old offline password may not work and you need to connect the keypad to the APP for one time.
4. Add keypad to gateway
4.1 Select gateway in the APP, then click “ Add device by list”.
4.2 Select the Keypad , and then click “OK”. When the pop-up box is displayed, select “Immediately to join”.
4.3 The keypad is added to the gateway.

GUIDE FOR USE

1| Unlock/ Lock with password| Firstly, add the password.
Then, kill the APP.
Finally, enter the password to unlock/lock the door.
---|---|---
2| Check battery| Select “Accessories” in the APP to check battery status.
After you replaced the battery, the old offline password may not work and you need to connect the keypad to the APP for one time.
3| Beep alarm| There will be beeps when the device battery is low, and the battery needs to be replaced at this time.
4| Unbind device| Firstly, delete the device in the APP, then press “SET” button nearby the battery case for 5 seconds until you hear a beep, the device is unbound.
5| One way to unlock
multiple doors| If you need to use one keypad to open multiple locks, first turn on “multiple” in the keypad settings, and then bind the keypad to multiple locks.

PARAMETERS

WARNING

The battery may overheat if the following conditions occur, which may cause a fire or explosion hazard.

• Battery dismantling, impacting, squeezing or putting into fire, soaking.
• Contact metal or electrode short.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>