OZARKE Everlasting Candle Warmer Lamp Instruction Manual

OZARKE Everlasting Candle Warmer Lamp

Product Information

Specifications

• Product Name: Candle Warmer Lamp
• Power Supply: Electric
• Timer Options: 2, 4, 8 hours
• Dimming Levels: Adjustable
• Manufacturer Contact: Info@ozarke.com | Phone: 800-604-7271

Product Usage Instructions

Using the Candle Warmer Lamp

1. Install the Bulb: Ensure the bulb is properly installed in the lamp.
2. Place the Candle: Put the bottled candle in the groove of the base and turn on the power.
3. Activate the Wax Melting Lamp: Turn on the switch to start the wax melting process.

Pro Tip: For optimal fragrance release, heat the candle 2-3 times under the wax melting lamp. After each heating session, pour off a layer of melted oil from the surface of the candle to enhance the volatilization of essential oils.

Usage Guidelines

• Maintenance: Disconnect power before cleaning. Avoid using grinding tools or solvents. Regular cleaning and inspection are recommended for product longevity.
• Do’s: Clean with a soft cloth. Use as intended.
• Don’ts: Do not wash with water. Do not disassemble for modifications.

Timer Instructions

Familiarize yourself with the buttons:

• Clock Button: Set a timer to 2, 4, or 8 hours.
• + Button: Increase dimming level.
• – Button: Decrease dimming level.
• On/Off Button: Turn lamp on or off.

Setting the Timer
Press Clock Button to cycle through timer options. Select the desired duration.

Adjusting Dimming Level
Use + Button to increase brightness and the – Button to decrease. Adjust to preference.

Turning Lamp On/Off
Press On/Off Button to control lamp operation. Turn off when not in use to save energy.

Frequently Asked Questions (FAQ)

• Q: Can I use scented candles with this lamp?
  A: Yes, scented candles can be used with the candle warmer lamp for fragrance release.

• Q: How often should I clean the lamp
  A: Regular cleaning is recommended to maintain optimal performance. Clean as needed based on usage.

Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.

Working Principle:

The candle warmer lamp operates by heating the bulb to evenly melt the surface of the fragrance candle and release its aroma. It provides a safer and more convenient alternative to open flames and also serves as a decorative item.

Here are the steps for using the candle warmer lamp:

• Step 1: Install the bulb.
• Step 2: Place the bottled candle in the groove of the base and turn on the power.
• Step 3: Turn on the switch to activate the wax melting lamp.
• Protection Grade: IP20
• Working Environment: -5°C to 45°C for normal operation
• Protection Level Against Electric Shock: Class II
• Power: Maximum 35W
• Power Supply: 110V/50Hz-220V/60Hz

Pro Tip:

To ensure proper volatilization of the essential oil, it is recommended to heat the candle 2-3 times under the wax melting lamp. After each heating session, pour off a layer of melted oil from the surface of the candle. This will allow the essential oil to continue volatilizing until the wax is completely melted. By following this process, you can optimize the fragrance release from your candle.

Usage Guidelines

• Remove the plastic protective bag from the lamp body before use.
• Prior to use, please check if the voltage matches and ensure the product is not damaged.
• Do no t turn on the power supply until the installation of the product is completed. Always cut off the power supply before moving it.
• It is important to use a stable voltage. Unstable voltage can shorten the product’s lifespan.
• Keep the lamp away from curtains, paper, and other flammable materials.
• Do not place the lamp on surfaces that are inclined at an angle greater than 6 degrees.
• Keep the lamp away from children and pets. Avoid exposing it to direct sunlight and high humidity Avoid lighting candles simultaneously when using the wax melting lamp to prevent accidents. The continuous working time of the wax melting lamp should not exceed 4 hours.
• Do not touch the bulb and lampshade while the product is in operation or still hot to prevent burns.
• Before going to bed, remember to turn off the power supply to avoid prolonged exposure to excessive heat.
• Do no t handle the plug or adjust the power supply with wet hands to prevent the risk of electric shock.
• This product is intended for indoor use only.
• Individuals with amblyopia, astigmatism, or children should not stare directly at the product’s light source for an extended period.

Maintenance:

• Befor e wiping and cleaning the product, always disconnect the power supply.
• Do not use grinding tools or solvents to clean the product.
• Regular cleaning and inspection are recommended to prolong the product’s service life. Do not wash the lamp body directly with water.
• It is strictly forbidden to disassemble the product for any modifications.

Timer Instructions

Familiarize yourself with the different buttons and their functions:

• Clock Button: Use this button to set the timer to 2, 4, or 8 hours.
• + Button: Press this button to increase the dimming level of the lamp.
• – Button: Press this button to decrease the dimming level of the lamp.
• On and off Button: Use this button to turn the lamp on and off.

Setting the Timer

• Press the Clock Button to activate the timer function.
• Each time you press the Clock Button, the timer will cycle through the available options: 2 hours, 4 hours, and 8 hours.
• Select the desired timer duration by pressing the Clock Button until the desired option is displayed.

Adjusting the Dimming Level

• To increase the brightness of the lamp, press the + Button. Each press will incrementally increase the dimming level.
• To decrease the brightness, press the – Button. Each press will incrementally decrease the dimming level.

Turning the Lamp On and Off

• Press the On and off Button to turn the lamp on or off. When the lamp is on, the light will be emitted.
• To conserve energy, make sure to turn off the lamp when it is not in use.

Should you require any installation assistance, please contact our customer service team:
Email : Info@ozarke.com
Phone : 800-604-7271

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>