OZARKE 641320646570OZ SKIRTS HaloLight Instruction Manual
- May 15, 2024
- OZARKE
Table of Contents
OZARKE 641320646570OZ SKIRTS HaloLight
Product Information
Specifications:
- Power Supply Range: 100-240V, 50Hz
- Indoor Use Only
- Avoid exposure to corrosive chemicals or gases
- Do not install the lamp outdoors
Product Usage Instructions:
Safety Instructions:
- Turn off the power: Before working with electrical wiring, ensure the power to the area is switched off.
- Use appropriate tools: Only use tools specifically designed for electrical work and ensure they are in good condition.
- Wear protective gear: Safety glasses, gloves, and other protective equipment should be worn as needed.
- Test for power: Prior to handling any wires, use a non-contact voltage tester to confirm the absence of electrical current.
- Avoid wet conditions: Electrical work should not be conducted in wet or damp environments.
- Keep a safe distance: Maintain distance from exposed wires or electrical components.
- Seek professional help: If unsure about any aspect of electrical wiring, consult a qualified electrician.
Installation Instructions:
- Ensure the power supply is within the specified range (100-240V, 50Hz).
- Avoid scratching the lamp’s surface and wires during installation.
- Install the lamp indoors only; do not place it outdoors.
- Keep the lamp away from corrosive chemicals and gases; do not wash with water, use a clean soft cloth for cleaning.
Touch Switch:
Include specific instructions for using the touch switch here.
FAQ
-
Q: Can I install the lamp outdoors?
A: No, the lamp is designed for indoor use only. Installing it outdoors may lead to damage or safety hazards. -
Q: What should I do if the lamp is scratched during installation?
A: Avoid scratching the lamp’s surface and wires during installation. If scratched, handle it carefully to prevent further damage.
INSTRUCTION MANUAL
Thank you for shopping with Ozarké, we really appreciate your business. Our goal is to provide an excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at info@ozarke.com and one of our customer service reps will reach out to assist you.
Before you get started:
When working with electrical wiring, follow these safety instructions to
prevent injury or damage:
- Turn off the power: Before starting any work, turn off the power to the area you will be working in.
- Use appropriate tools: Only use tools designed for electrical work and in good condition.
- Wear protective gear: Wear safety glasses, gloves, and other protective gear as necessary.
- Test for power: Use a non-contact voltage tester to check for electrical current before touching any wires.
- Avoid wet conditions: Do not work with electrical wiring in wet or damp conditions.
- Keep a safe distance: Stay away from exposed wires or electrical components.
- Seek professional help: Consult a qualified electrician if you are unsure about any aspect of electrical wiring or encounter any problems.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
Touch Switch
3 Color Temperature & Stepless Dimming: In addition to stepless brightness
adjustment, the tripod floor lamp has 3 different color temperature settings:
Cold White, Natural White, and Warm White (ranging from 3000 K to 5000 K). A
single tap will turn the lamp on and set it to Cold White. A second tap will
switch it to Natural White, and a third tap will change it to Warm White. With
the stepless dimming design, holding down on the touch sensor will gradually
adjust the lighting to suit your needs. Once you’ve set a comfortable
brightness level, you’re all set.