THUNDEROBOT ML903 Gaming Mouse User Manual
- June 1, 2024
- THUNDEROBOT
Table of Contents
THUNDEROBOT ML903 Gaming Mouse
Specifications
- Mouse Dimensions: 124.139.763.7mm
- Wireless Charging Station Dimensions: 92.24945.1mm
Product Usage Instructions
For Mouse
LAYOUT:
- Left/right button
- Scroll wheel
- Forward button
- Backward button
- Battery indicator
- USB Type-C port
- Triple-step switch
- DPI switch button/BT pairing button
- DPI indicator/Connect indicator
- Optical sensor
- Magnetic charging contact
- 2.4G wireless dongle compartment
- Mouse foot sticker
- 2.4G wireless dongle
Instructions:
- Toggle the Triple-step switch to select the connection mode (wired, 2.4G, or BT).
- Connect the USB cable to the USB Type-C port for wired mode.
- To wirelessly charge, align the mouse’s magnetic charging contact with the station’s.
- Press the DPI switch button to change DPI settings.
For Wireless Charging Station/4K Dongle (4K Suite Only)
LAYOUT:
- USB Type-C port
- Rear lighting
- Magnetic charging contact
- Anti-slip sticker
Instructions:
- For wireless charging, place the mouse on the station with aligned contacts.
FAQ
-
How do I change the DPI settings on the mouse?
To change DPI settings, press the DPI switch button on the mouse. The charging station’s lighting zone will sync with the color change indicating the DPI level. -
Can I charge the mouse wirelessly?
Yes, the mouse supports both cable and wireless charging. To wirelessly charge, align the magnetic contacts of the mouse with the charging station.
Please read the manual carefully before using this product and keep it for reference
SECURITY INFORMATION
BEFORE USING AND OPERATING THE EQUIPMENT, PLEASE READ AND FOLLOW THE PRECAUTION BELOW TO ENSURE THAT THE EQUIPMENT IS PERFORMING BEST AND TO AVOID DANGEROUS OR ILLEGAL SITUATIONS.
- Please use the equipment within the temperature 0°C-35°C and store the equipment and its accessories within the temperature -10°C-+40°C. When the ambient temperature is too high or too low, it may cause equipment failure.
- The equipment and its accessories may contain some small parts. Please place the equipment and its accessories out of the child’s reach. Children may inadvertently damage the equipment and its accessories, or swallow small parts causing suffocation or other hazards.
- Please avoid rain or damp of the equipment and its accessories, otherwise it may cause fire or electric shock.
- Please keep the equipment and its battery away from the fire source, high temperature and direct sunlight. It is forbidden to throw the battery into the fire, dismantle, fall, squeeze or modify the battery. It is forbidden to immerse the battery in water or other liquid to avoid external blow and pressure, so as not to cause battery leakage, overheating, fire or explosion.
- Do not replace the battery by yourself, otherwise it may damage the battery, resulting in overheating, fire and personal injury.
- Do not disassemble or modify the equipment (including the replacement of the built-in battery) and its accessories, otherwise the equipment and its accessories are not within the scope of the warranty.
- Please dispose the equipment, batteries and other accessories according to the local regulations and they should not be treated as household garbage. If the battery is not disposed of properly, the battery may explode.
LAYOUT
FOR MOUSE
- A Left/right button
- B Scroll wheel
- C Forward button
- D Backward button
- E Battery indicator
- F USB Type-C port
- G Triple-step switch
- H DPI switch button/BT pairing button
- I DPI indicator/Connect indicator
- J Optical sensor
- K Magnetic charging contact
- L 2.4G wireless dongle compartment
- M Mouse foot sticker
- N 2.4G wireless dongle
FOR WIRELESS CHARGING STATION/4K DONGLE
(4K SUITE ONLY)
- 0 USB Type-C port
- P Rear lighting
- Q Magnetic charging contact
- R Lighting effect switch button
- S Anti-slip sticker
SPECIFICATION
Dimension
- Mouse: 124.139.763.7mm
- Wireless charging station: 92.24945.1mm
DPI INDICATORS
| DPI| INDICATOR COLOR
---|---|---
1| 800| RED
2| 1200| ICE BLUE (DEFAULT)
3| 1600| YELLOW
4| 3200| PINK
Press the DPI switch button to change the DPI, the charging station lighting zone will sync the color change.
PACKING LIST
- Mouse * 1
- USB cable * 1
- 2.4G wireless dongle * 1
- 2.4G wireless dongle extension *1
- User manual / Certificate * 1
- Wireless charging station * 1 (4K suite only)
INSTRUCTIONS FOR USE
FOR MOUSE
Triple-step switch
- Power off mode: the mouse is power off, connect the USB cable will enable wired mode.
- 2.4G Power on: 2.4G mode, the connect indicator will flash green, the mouse works.
- Power on: BT mode, the connect indicator will flash blue, make the mouse near to the PC, press the BT paring button to pair the devices.
*Wired mode: plug-and-play, not affected by the switch, the wired mode will work by default if the wired/wireless connection enabled simultaneously.
The mouse will be charging in wired mode.
2.4G MODE DUAL DONGLE SWITCH
In 2.4G mode, connect the 4K dongle and 2.4G wireless dongle to different PC,
using the combination buttons can switch the connection between different PC.
*The dongle switch combination buttons: forward button + backward button + scroll button, press and hold for 1s.
BT MODE HOST DEIVCE SWITCH
In BT mode, press and hold the BT pairing button to pair the mouse and the PC,
the connect indicator will flash blue (the BT can be paired with max two
devices
simultaneously).
- DPI switch button + forward button to switch the paired device.
CHARGING FUNCTIONALITY
The mouse support charging via cable or wireless. Cable charging: connect the
mouse and the PC device via the USB cable. Wireless charging: put the mouse to
the wireless charging station, make sure the contact aligned.
FOR WIRELESS CHARGING STATION/4K DONGLE
(4K SUITE ONLY)
Press the lighting effect switch button (button R) will change the lighting
effect of the charging station. These are the available effects: RGB
streamer(default) – single color steady (yellow, ice blue, pink, red, blue,
green, purple) – single color breathing (yellow, ice blue, pink, red, blue,
green, purple) – neon- OFF.
OTHER FUNCTIONS
AUTOMATIC SLEEP MODE
The mouse will enter into sleep mode after standing for 3 minutes, move the
cursor will wake it up. If standing over 15 minutes the mouse will enter into
deep sleep mode, click the buttons to wake it up.
CHARGING STATUS
The battery indicator (E) lights will lit up in cycles during the charing,
once fully charged all three lights will lit up.
BATTERY STATUS
The battery indicator (E), 3 lights up means the battery is about 100%, 2
lights up about 60%, 1 light up about 25% or less.
BATTERY LOW POWER OFF
If the battery capacity is less the 10%, the battery indicator (E) 1 light
will flash (once per second); If the battery voltage is lower than 3.2V, the
mouse will automatically power off.
SAFETY TIP
The MAX charging voltage is 5V and the charging current is no more than 1A.
OS SUPPORT
Windows 11/Windows 10/Windows 8/Windows 7/ Windowse Vista/WindowseXP
macOS10.12 – 10.14/ Mac OS X 10.8 – 10.11
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement, The
device can be used in portable exposure condition without restriction.
FCC WARNING: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment. The device has been
evaluated to meet general RF exposure requirement. This equipment complies
with FCC’s RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna (s) must not be co-located or
conjunction with any other antenna or transmitter.
https://www.thunderobot.com/