PROAIM SM-8 8 Camera Gripper Suction Mount for 3-Axis Gimbals Instruction Manual
- June 1, 2024
- PROAIM
Table of Contents
PROAIM SM-8 8 Camera Gripper Suction Mount for 3-Axis Gimbals
Product Information
Specifications
- Product Name: Camera Gripper Suction Mount For 3-Axis Gimbals (SM-8)
- Model: SM-8
- Manufacturer: Proaim
- Compatibility: Designed for 3-axis gimbals
Product Usage Instructions
Assembly
- Inspect the contents of the package to ensure all parts are included.
- Attach the Camera Gripper Suction Mount securely to your 3-axis gimbal.
- Adjust the suction cups to ensure a tight grip on the mounting surface.
Usage
- Once assembled, place the gripper suction mount on a smooth, clean surface and press down firmly to create a strong suction hold.
- Ensure the mount is securely attached before using it with your camera and gimbal setup.
Maintenance
- Regularly check the suction cups for any signs of wear or damage.
- Clean the suction cups and the mounting surface before each use for optimal performance.
FAQs
- Q: Can I use this mount with any type of camera?
- A: The Camera Gripper Suction Mount is specifically designed for use with 3-axis gimbals and is compatible with a wide range of cameras that are suitable for gimbal setups.
- Q: How do I ensure a secure grip with the suction cups?
- A: Make sure the mounting surface is clean and smooth before attaching the suction cups. Press down firmly on each cup to create a strong vacuum seal.
What’s In The Box
- Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>