PROAIM OA-ZYLN-12 Zyline Camera Offset Arm Instructions
- June 1, 2024
- PROAIM
Table of Contents
PROAIM OA-ZYLN-12 Zyline Camera Offset Arm
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below:
- Proaim Zyline 12″ Offset Arm (OA-ZYLN-12)
Specifications
| Product | Zyline Offset Arm |
|---|---|
| Model | OA-ZYLN-12 |
| Brand | Proaim |
| Length | 12 inches |
Description of Image
The image depicts two views of the Proaim Zyline Offset Arm. The Offset Arm
is a black, oblong piece with several holes for mounting and a large central
hole with a metallic screw fixture. It appears to be made of a sturdy
material, likely metal, with a matte finish. There are two identical units
shown from different angles, providing a comprehensive view of the product.
Product Usage Instructions
- Unbox the Zyline Offset Arm (OA-ZYLN-12) and inspect the contents to ensure all parts are included.
- Identify the different components of the offset arm as per the provided assembly manual.
- Follow the step-by-step assembly instructions to correctly set up the offset arm.
- Ensure all connections are securely tightened to prevent any wobbling or instability.
- Once assembled, attach the Zyline Offset Arm (OA-ZYLN-12) to the compatible equipment or mounting point.
- Adjust the arm as needed to achieve the desired positioning for your equipment.
- Regularly check the arm for any signs of wear or loose parts and tighten or replace as necessary.
What’s In The Box
Proaim Zyline 12″ Offset Arm (OA-ZYLN-12)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Frequently Asked Questions
- Q: What should I do if any parts are missing from the package?
- A: In case of missing parts, please contact our customer support for assistance and replacement.
- Q: Can the Zyline Offset Arm (OA-ZYLN-12) be used with any camera or equipment?
- A: The compatibility of the arm may vary, so it is recommended to check the specifications and weight capacity to ensure suitability for your equipment.
- Q: How do I know if I have received all parts of the Zyline Offset Arm?
- A: Inspect the contents of your shipped package to ensure it includes the Proaim Zyline 12″ Offset Arm (OA-ZYLN-12) as listed.
- Q: What should I do if a part is missing or damaged?
- A: Contact the manufacturer or the retailer from whom you purchased the product for assistance with missing or damaged components.
- Q: Where can I find additional assembly instructions?
- A: Further assembly instructions would typically be provided in the following pages of the assembly manual, which are not shown in the provided image.