Interlogix 5530M Wiring Uplink’s Cellular Communicators and Programming the Panel Instruction Manual

Interlogix 5530M Wiring Uplink’s Cellular Communicators and Programming

the Panel

Product Information

Interlogix NX-8E Alarm Panel

The Interlogix NX-8E Alarm Panel is a versatile and reliable security system that allows for seamless integration with various communicators for enhanced monitoring and control capabilities.

Specifications

• Model: Interlogix NX-8E
• Compatibility: Works with Uplink Cellular Communicators, 5530M communicators, MN Series with UDM, and more
• Features: Contact ID reporting, Keyswitch zone and output programming, UDL functionality

Product Usage Instructions

Wiring Uplink’s Cellular Communicators to Interlogix NX-8E

1. Ensure proper power and connectivity for the Uplink Cellular Communicators.
2. Follow the wiring diagrams provided in the manual to connect the communicators to the NX-8E panel.

Programming the Interlogix NX-8E Alarm Panel via the Keypad

1. To enable Contact ID reporting, follow these steps:
   • Enter programming mode by pressing *89713.
   • Navigate to the main menu by entering 00#.
   • Select the desired settings for reporting and zones.
   • Exit programming mode by pressing the necessary keys.

Frequently Asked Questions (FAQ)

Q: How do I program the Panel for Upload/Download (UDL)?
A: To program the Panel for UDL, follow these steps:

• Enter programming mode by pressing *89713.
• Navigate to the main edit menu by entering 00#.
• Configure the Download Access Code and set the number of rings to answer.
• Ensure proper settings for Download control toggles.
• Exit programming mode by pressing the necessary keys.

Wiring Uplink’s Cellular Communicators and Programming the Panel

CAUTION:

• It is advised that an experienced alarm installer programs the panel as further programming may be required to ensure proper performance and use of the full functionality.
• Do not route any wiring over circuit board.
• Full panel testing, and signal confirmation, must be completed by the installer.

NEW FEATURE: For 5530M Communicators, the status of the panel can be retrieved not only from the status PGM but now also from the Open/Close reports from the dialler. Therefore, wiring the white wire and programming of the status PGM of the panel is optional.

IMPORTANT NOTE: The Open/Close reporting needs to be enabled during the initial pairing procedure.

Wiring

Wiring the 5530M communicators to Interlogix NX-8E

Wiring the MN Series with UDM to Interlogix NX-8E for UDL for remote upload/download

Panel via the Keypad

Programming the Interlogix NX-8E Alarm Panel via the Keypad

Enable Contact ID reporting:

Program Keyswitch zone and output:

Programming the GE Interlogix NX-8E Alarm Panel via the Keypad for remote Upload/Download (UDL)

Program the Panel for Upload/Download (UDL):

Documents / Resources

| Interlogix 5530M Wiring Uplink’s Cellular Communicators and Programming the Panel [pdf] Instruction Manual
5530M Wiring Uplink s Cellular Communicators and Programming the Panel, 5530M, Wiring Uplink s Cellular Communicators and Programming the Panel, Cellular Communicators and Programming the Panel, Communicators and Programming the Panel, Programming the Panel, Panel
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>