interlogix D1300 Series IFS RS-485 Point to Point Data Transceiver Owner’s Manual

: June 9, 2024
: interlogix

Table of Contents

Overview
Application Examples
Standard Features
Specifications
System Design
Ordering Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

D1300 Series
IFS RS-485 (2-wire)
Point-to-Point Data Transceivers

Security

Overview

The IFS D1300 series data transceivers provide point-topoint transmission of half-duplex (2-wire) EIA RS-485 tri-state data signals over one or two optical fibers. The transceivers are transparent to data encoding allowing for broad- range compatibility. When used as a line-terminating device, these modules are also compatible with the IFS D2300 series drop and repeat data transceivers. Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive data status indicating LED’s for monitoring proper system operation. The modules are available in either stand-alone or rack mount versions.

Application Examples

Access Control Systems
Building Automation and Environmental Control Systems
Computer/Data Equipment
Fire & Alarm Systems
ITS Traffic Signalization Networks

RS-485 (2-wire) Point-to-Point Data Transceivers

For implementing point-to-point transmission of half-duplex (2-wire) EIA RS-485 tri-state data signals over one or two optical fibers.

Standard Features

Meets EIA RS-485 Specifications
Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Automatic Resettable Solid-State Current Limiters
Power, Transmit and Receive Data Status LED Indicators
No In-field Electrical or Optical Adjustments Required
Data rates up to 400 kbps NRZ
Data Re-clocking
Transparent to Data Encoding / Compatible with Major Data Protocols
Point-to-Point Network Architecture
2-Wire (Half-Duplex)
True Tri-State Output
Hot-Swappable Rack Modules
Distances up to 20 Miles (33 km)
Comprehensive Lifetime Warranty

Specifications

Data
Data Interface:
Data Rate:
Total Network Pulse Distortion:-HS Option Data Rate:
Wavelength| RS-485 (2-wire)
DC – 150 Kbps
<1µs
DC – 400 Kbps
D1300 and D1300WDMB: 850 nm, Multimode
All others: 1310 nm, Multimode or Single Mode
---|---
Number Of Fibers| 2
Electrical & Mechanical
Power:
Surface Mount:
Rack:
Number of Rack Slots:
Current Protection:
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount:
Rack Mount:
Shipping Weight:| 12 VDC @ 200 mA to 24 VDC @ 100 mA
From Rack
1
Automatic Resettable Solid-State Current Limiters
Meets IPC Standard
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
< 2 lbs./0.9 kg
Environmental
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:| > 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.

System Design

Ordering Information

| Part Number| Description| Fibers Required| Opt. Pwr. Budget| Max. Distance*
---|---|---|---|---|---
Multimode
62.5/125µm**| D1300
D1300WDMA
D1300WDMB
D1320| RS-485 Data Transceiver (850 nm)
RS-485 Data Transceiver (850 nm)
RS-485 Data Transceiver (1310 nm)
RS-485 Data Transceiver (1310 nm)| 2
1
1
2| 11 dB
11 dB
11 dB
10 dB| 1.9 miles (3 km)
1.9 miles (3 km)
1.9 miles (3 km)
6 miles (10 km)
Single Mode
9/125µm| D1325| Data Transceiver (1310 nm)| 1| 11 dB| 20 miles (33 km)
Accessories♦| PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Options| Add ‘-24’ for 24 VDC Power (Extra charge, consult factory)
Add ‘-R3’ to Model Number for R3 Rack Mount – No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-HS’ for High Speed Data Rates up to 400 Kbps (Extra charge, consult factory)

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦All accessories are third party manufactured.

North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to change without notice
© 2008 General Electric Company
All Rights Reserved