TFA 30.5054.xx Digital Thermo-Hygrometer Instruction Manual

Instruction manual
Kat.Nr.: 30.5054.xxhttps://www.tfa-dostmann.de/en/produkt/digitales- thermo-hygrometer-black-white-30-5054/#product-information

30.5054.xx Digital Thermo-Hygrometer

Thank you for choosing this instrument from TFA.
Before you use this product:
Please make sure you read the instruction manual carefully.
The operating instructions are enclosed with the device or can be downloaded at
www.tfa-dostmann.de/en/service/downloads/instruction-manuals
This product should only be used as described within these instructions.
Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
Please take particular note of the safety advice! Please keep this instruction manual safe for future reference.

Safety notices

WARNING

• Keep this device and the batteries out of reach of children.
• Small parts can be swallowed by children (under three years old).
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart, or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking. Make sure the polarities are correct. Never use a combination of old and new batteries together, nor batteries of different types. Remove the batteries if the device will not be used for an extended period of time.
  Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries!

CAUTION

• Unauthorized repairs, alterations, or changes to the product are prohibited.
• Do not expose the device to extreme temperatures, vibrations, or shocks.
• Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
• Only suitable for indoor use. Protect it from moisture!

Elements
Display (Fig.1)
A – Indoor temperature
B – Indoor humidity
C – Date / weekday
D – Time
E – Smiley for the comfort level

Buttons & Housing (Fig.2)
A – SET button
B – Magnet (integrated)
C – Holder with a self-adhesive pad
D – Suspension device
E – Stand (fold-out)
F – Battery compartment
G – – button
H – + button

Getting started

• Remove the protective film from the display.
• Fold out the stand (Fig.2-E). Open the battery compartment (Fig.2-F) and remove the battery insulation strips.
• Close the battery compartment.
• All LCD segments will be displayed for a short moment.
• The device is ready for use.

Operation

Special features of the display

• Due to the special “E-paper” display, all display changes have a reaction time of 1 second. The time interval between each keypress must be greater than 1 second.
• To ensure display quality, the screen automatically switches between positive and negative display modes once every hour.

Manual settings

• Press and hold the SET button (Fig.2-A) for 3 seconds to enter the setting mode.
• The first adjustable value appears on the display.
• Use the + or – button (Fig.2-H+G) to make the desired setting. Press and hold the + or – button in the respective setting mode for quick setting (in step 2).
• Confirm with the SET button and go to the next setting.
• The device will automatically quit the setting mode if no button is pressed for 30 seconds.
• The sequence is shown as follows:
• 24/12-hour format (default: 24H)
• Year, month, day
• Month/day sequence D/M or M/D (default D/M)
• Hours, minutes
•  Day-of-week language (default: GE)
• Day-of-week language: German (GE), French (FR), Spanish (SP), Italian (IT), Dutch (DU), Danish (DA), English (EN).

Indication of maximum and minimum values

• Press the + button (Fig.2-H) in normal mode.
• MAX appears on the display. The maximum values measured since the last reset appear on the display.
• Press the + button again.
• MIN appears on the display. The minimum values measured since the last reset appear on the display.
• To go back to the present value display, press the + button once more.
• The device will automatically quit the MAX/MIN mode if no button is pressed for 10 seconds.
• To clear the recorded maximum or minimum readings, press and hold the + button (Fig.2-H) for three seconds while the maximum or minimum values are displayed.

Display indications

• With the SET button (Fig.2-A) you can toggle between date and weekday in normal mode.
• Press the – button (Fig.2-G) in normal mode to change between °C (Celsius) or °F (Fahrenheit) as temperature units.
• In normal mode, press and hold the – button to switch between positive and negative display mode.

Comfort level

• On the display appear 3 different faces to indicate the comfort level of indoor climate for temperature and humidity.

Positioning and fixing
You can choose between four different options:

• With the foldable leg at the back (Fig.2-E), the device can be set up in various positions.
  The stand is properly latched when a click is heard.

• Fasten the wall holder (Fig.2-C) with the self-adhesive foil at a suitable place and hang up the device.

• Remove the wall holder and fix the device with the suspension device (Fig.2-D) on a nail or a screw.

• Use the integrated magnet (Fig.2-B) at the back of the device to place it on metal surfaces.
  Avoid radiators and direct sunshine.

Battery replacement

• When the batteries are used up, appear on the display.
• Open the battery compartment (Fig.2-F) and insert two new CR2032 batteries, +pole above.
• Close the battery compartment.
• Note: If the batteries are removed while the product is operating, the screen will retain the display at the time the batteries were removed until the batteries are next inserted.

Troubleshooting

Change the batteries
Display| Change the batteries
Display LL.L / HH.H| The temperature outside the measuring range
Incorrect indication| Change the batteries

If your device fails to work despite these measures, contact the retailer where you purchased the product.

Specifications

Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.

Never dispose of empty batteries and rechargeable batteries with ordinary household waste. As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or local regulations in order to protect the environment. The symbols for the contained heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead
This product is labeled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE). Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-of- life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal.

No part of this manual may be reproduced without the written consent of TFA Dostmann. The technical data are correct at the time of going to print and may change without prior notice.
The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.
www.tfa-dostmann.de/en/service/downloads/instruction-manuals

www.tfa-dostmann.de | E-Mail: info@tfa- dostmann.de
TFA Dostmann GmbH & Co. KG
Zum Ottersberg 12
97877 Wertheim
Germany

05/21

Documents / Resources

| TFA 30.5054.xx Digital Thermo- Hygrometer [pdf] Instruction Manual
30.5054.xx Digital Thermo-Hygrometer, 30.5054.xx, Digital Thermo-Hygrometer, Thermo-Hygrometer, Hygrometer
---|---

References

• Testseite für dostmann.de
• ᐅ Messgeräte, die begeistern | TFA Dostmann
• ᐅ Bedienungsanleitung für TFA Produkte – TFA Dostmann

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>