TRADEQUIP 2048T Air Workshop Press Instruction Manual
- June 1, 2024
- TRADEQUIP
Table of Contents
TRADEQUIP 2048T Air Workshop Press
Product Information
Specifications
- Product Name : Air/Manual Workshop Press
- Safe Working Capacity: 50,000KG
- Bed Width : 713mm
- Inside Bed Gap: 210mm
- Power Source: Manual two-speed pump
- Features : Non-slip bed winch with steel cable roller
- Manufacture r: TradeQuip
- Product Code: 2048T
Product Usage Instructions
- Safety First: Before operating the workshop press, ensure all safety precautions are in place, including wearing appropriate protective gear.
- Positioning: Place the component to be worked on between the press bed and the ram, ensuring it is centred and secure.
- Operating the Pump: Use the manual two-speed pump to raise or lower the ram as needed for the task at hand.
- Pressing: Slowly apply pressure using the pump to press, bend, straighten, or stamp the component. Monitor progress carefully.
- Adjustments: Make any necessary adjustments to the component or positioning during the pressing process to achieve the desired outcome.
FAQ
- Q: Can this workshop press handle components of various shapes and sizes?
- A: Yes, the wide bed width and inside bed gap make it suitable for handling a variety of components.
- Q: Is it recommended to lubricate any parts of the workshop press?
- A: It is advisable to regularly lubricate moving parts, such as the ram and winch, to ensure smooth operation and longevity of the press.
- Q : How do I maintain and clean the workshop press?
- A : Regularly inspect for any damage or wear, clean surfaces free of debris, and store in a dry and secure location when not in use.
This “TradeQuip “Made for the Trade” 50,000kg Air/Manual Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With its very wide 713mm bed width and 210mm inside bed gap, this press becomes one of the most diverse Workshop Presses in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non- slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
Features
- Heavy-duty high-grade steel frame
- Hand-operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish to help prevent rust
- Paint is oil, grease and dirt-resistant
- High-quality large-diameter hydraulic unit
- Hand winch for fast height adjustments
Specifications
- Safe Working Capacity : 50,000kg
- Working Range : 137-837mm
- Overall Dimensions: 1700H x 1290W x 745Dmm
- Bed Outside: 356mm
- Bed Inside: 200mm
- Bed Width: 710mm
- Bed Internal : 390 x 200mm
- Piston Ram Stroke : 190mm
- Ram Diameter: 95mm
- Bed Height Settings : 6
- Operating Air Pressure : 110-125 psi
- Nett Weight : 271kg
- Carton : 1900 x 945 x 490mm
- Gross Weight: 305kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>