aotedor NXN20-205 Power Wheelchair User Manual

aotedor NXN20-205 Power Wheelchair

User Manual

Please Read This User Manual Carefully And Save It For Future Reference.

Refer to the Help Guide
This is the Aotedor Electric Wheelchair manual.
You can use Google Drive to Scan the QR code below to access essential operating instructions on your mobile device.

Customer Service

For any questions, please do not hesitate to contact us via below methods.

Phone:909-566-2822 (US)
Facebook: Aotedor US
Whatsapp:+8618175895080
Aotedor Direct

WhatsApp contact

official email address: AotedorDirect@outlook.com

Brief Introduction

• This model is equipped with modern high-tech electronics and special features for the most comfortable ride.
• This manual contains important information regarding the safe use of the power wheelchair.
• Please read it carefully and ensure you understand all the instructions before attempting to use the vehicle.

1. Footrest
2. Battery
3. Charging port
4. Joystick controller
5. Armrest
6. Handlebar
7. Rear wheel
8.  Motor
9.  Front wheel

Terminology

• Joystick: The device used to “move” the power chair.
• Controller. The device that allows the joystick to function.
• Armrests: Where arms can rest during time spent on power chair
• Footrest: Where feet can rest during time spent on the power chair.
• Anti-tip wheels: Wheels that allow slight tipping, or prevent tipping while driving. Rear wheel: The main wheels that move the power chair.

Let’s  Out Your New Electric Wheelchair

What’s in the Box?

• Electric Wheelchair User Manual [This Booklet]

• Electric Wheelchair
  Batteries2 0

• Electric Wheelchair

• Toolkit*l

• Battery Charger* 1 1 TO;KITJ

• Controller* 1

Unpacking and Setting up the Wheelchair

Remove the Wheelchair from the Box

• cut the packing tape on only one end of the shipping box .
• lay the box on one side(be sure to save it in case you decide to return the unit).
•  grab the unopened end of the box and lift slowly to slide the wheelchair out.

Unfold The Wheelchair

1. Unfold both armrests outwards and press the cushion.
2. Fix the backrest.
3. Put down the folded footrest.

Attach the Controller

1. Insert the front controller to the appropriate length. The controller’s fixture is on the right. If you want to install the controller on the left, you need to move the black fixture to the left first.
   

2. Ensure that the Controller plug is properly connected to the battery.
   

Lift The Armrests

Press the button on the underside of the armrests to loosen them for easy in and out from sideways .

Remove The Battery

1. Step 1: Pull out the power plug.
2. Step 2: Press the locking button to disengage the battery box from the frame, pull out the battery box based on the direction of the guide block.

Manual/ Automatic Switching

It is crucial to switch the wheelchair from manual to electric mode (locked) while utilizing the electric function and while charging via the controller.Failure to do so may result in persistent alerts throughout the entire process.For detailed instructions on how to switch modes,please refer to below images.

ATTENTION :
It is advisable to keep the wheelchair in the electric operation state. The role of the clutch device is only to allow the wheelchair to be pushed manually in crowded places. Please keep both clutch forks in same state.

Folding your wheelchair

1. Step 1: Press this button and fold the backrest.
   

2. Step 2: Hold the center of seat cushion , pull up the seat , then fold the wheelchair easily.

3. Step 3: Raise the footrest to the folded position

Control button

1. Battery indicator
2. Horn
3.  Acceleration button
4. LED light button
5. USB
6. LED light
7. On/off button
8. Speed indicator
9. Deceleration button
10. Joystick
11. Charging port

On/off button and power display
The on / off button provides power to the electronic components of the control system to provide power to the wheelchair motor. In an emergency, you can use the on/ off button to stop the wheelchair.

The power display shows the current battery power of the wheelchair. The indicator light tells you that the wheelchair is on. At the same time, the power display also shows the status of the wheelchair.

Turn on the power

Press the power button Both indicators will light up.

Turn off the power

Press the power button The indicator light will go off

Joystick
The main function of the joystick is to control the speed and direction of the wheelchair. The further the joystick is moved from a central position, the faster the wheelchair runs. When you release the joystick, the wheelchair automatically brakes.

Speed display (Sl -SS)
This display indicates the wheelchair setting. With a total of five settings, S1 is the lowest speed, and S5 is the highest.

Horn
Press the horn to sound an alert.

Deceleration button
This button reduces the speed setting gear and turns the corresponding speed indicator lights off. This button has no effect when driving the wheelchair.

Acceleration button
This button can increase the speed setting gear and the corresponding speed indicator lights on. This button has no effect when driving the wheelchair.

LED light
This button can control the light which under the controller.

Self-help guidance
If a system failure occurs, check the position of the flashing lamp on the speed display and battery indicator. Below are a series of errors which could be indicated by an abnormal sound:

Controller status indication

in and the connection is good.

Six long after two| The controlled is| Just after a heavy load, check
short sounds| displaying an

over-current status

| whether the vehicle exceeds the rated load, then turn it off and restart.
Seven long after two| There is a joystick| When the controller switch is
short sounds| problem| turned on, whether to release the joystick and put the joystick in the center position. After turning the joystick,

turn off and on again.

Eight long after two short sounds| The controller is faulty| Replace the controller
Nine long after two short sounds| The controller is faulty| Replace the controller
| |

Specification

Output:3A

Practice before use

Failure to follow the instructions below may result in serious
injury or damage to the electric wheelchair.
Before venturing onto the roads, find an open area such as a park and ask a friend to accompany you until you have mastered the power chair’s operation.

This button reduces the speed setting gear and turns the corresponding speed indicator lights off. This button has no effect when driving the wheelchair.

Stop, forward, and reverse operations.
Simply push the joystick gently in the direction you wish to move in.

• First, practice moving forward. Be sure to set the speed to the lowest shift.
• After you have accomplished moving forwards, practise an “S” turn.
• When you can confidently perform these man­oeuvres, try reversing. Pay particular attention to check for obstacles when moving backwards.

In the event of one of the following errors, immediately turn off the electric wheelchair’s power supply:

1. Sudden movement
2. Operation direction is not controlled
3. Brake failure

Safety instructions

• Do not carry passengers.
• Do not drive across a slope.
• Do not drive under the influence of alcohol.
• Do not tailgate another vehicle.
• Do not operate hand-held communication devices such as radios or mobile phones.
• Do not exceed the safe climbing maximum angle.
• Do not use the joystick in an erratic manner when going up or downhill.
• Do not exceed the maximum user weight.
• Do not press the power button of the controller whilst moving as this could damage the electromagnetic brakes or the joystick controller.
• Do not travel on soft terrain.
• Do not attempt to climb stairs over two inches tall unless a ramp is installed. Do not disassemble the power wheelchair unless the electromagnetic brakes are engaged and the joystick controller is turned off.
• Do not operate the power wheelchair without a driver.
• Do not drive the power wheelchair on the main roads – the footpath  must be used.
• Do not change driving direction or reverse before the power wheelchair has completely stopped.
• Always engage a slow speed when going down gradients (move the joystick to the central position)
• Always use the safety belt.
• Always keep feet on the footrest while travelling.
• Always make sure the batteries are fully charged before setting out on a journey.
• Always charge the power wheelchair in a well-ventilated area.
• Always replace a loose screw from the centre of the wheel with a wrench.

Reminder! When using an electric wheelchair, the driver must follow all the rules and regulations of the road.

Precautions when driving on slopes:

WARNING

Do not disassemble the motor as this may result in severe damage or malfunction.

Joystick controller operation

Assemble the controller

1. Install the controller on the controller connection.
2. Adjust the controller direction then tighten the plum nut.
3. Fix the cabin plug with battery box.

The operation of the controller
Try to avoid knocking the controller, especially the joystick. Do not beat the controller and the joystick while traveling. Do not hit the controller.
When operating the wheelchair, ensure that the control system is safe and reliable.

Operating environment
Do not keep the control system and its components in a humid environment for long periods of time. If food or drink is spilled on the control system, it should be cleaned immediately.

Cleaning
Use a soft cloth to gently wipe the control system and the joystick.
Do not use abrasives and similar cleaners.

Battery use

The electric wheelchair uses a 24 voltage battery. It is a good idea to carry a replacement 24Vl 2AH battery, in case you need to charge the one in use. This is a maintenance-free sealed lithium battery. The batteries are designed to handle deep discharges. Although they are similar in performance to car batteries, they cannot be replaced. Car batteries are not safe for use in electric wheelchairs.

Battery charge and discharge
In order to maximize the efficiency of your wheelchair battery, you should:

1. Fully charge your battery during initial use.
2. Start slowly when using the wheelchair in your home or on the driveway.
3. Give your battery charge 4-6 hours, and then re-operate the wheelchair.
4. After 4-5 cycles of charging and discharging, the battery effect can reach 100%, and can continue for a long time.

Important information about the battery

Frequently charged batteries provide reliable performance and long battery life. If the battery is not charged often or not fully charged, it may cause damage to the battery permanently, causing unreliable operation and reduced battery life.

• If you do not often use your electric wheelchair, you must charge once a month to maintain battery life.
• If you want to ship your wheelchair, you must contact the shipping company in advance to ensure that the wheelchair meets the special requirements of the transport.
• Maintenance-free fully enclosed lead-acid batteries are designed for wheelchairs and other mobile vehicles. Overall, maintenance-free, fully enclosed lead-acid batteries are safe, green and environmentally friendly, such as aircraft, buses and trains. We recommend that you contact the
• public transport department for packaging and shipping according to special performance.
• Used batteries should be carefully discarded according to your local council’s regulations.

Maintenance &Warranty

Your electric wheelchair is designed to be maintenance-free. However, we recommend the following checks be completed on a regular basis.
Charger
The charger.a very important part of your wheelchair. provides energy to your wheelchair quickly and safely.

Joystick/Controller
Ensure that the controller is kept away from the damp air as this may cause easily damage and warranty void.

Battery cable
Check the battery cables to make sure they are not corroded.

WARNING
Do not disassemble the motor as this may result in severe damage or malfunction.

WARNING
Order information on Amazon is the warranty credential. Please carefully keep your Amazon order number. Note:the following cases are not covered by our warranty.
CD Fault damage caused by unauthorized disassembly, repair, modification,or abuse. @ Natural wear and tear of the product accessories.

• Warranty Period: One Year
• Phone: 909-566-2822 (US)
• Email: AotedorDirect@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>