Blackview Tab 3 Kids Tablet Instruction Manual

Blackview Tab 3 Kids Tablet

Overview

How to insert the TF card

How to boot

Non-removable battery Press the power button for 3-5 seconds to boot

Language switching settings

• Main menu–settings-system setting– language and input method
• Language and input method–language–language adding
• Select the language you need, the system will automatically jump back to the language interface
• Select the icon after the language bar and drag it to the first one.

SAR

• The maximum electromagnetic radiation absorption ratio (SAR) of this product is :s:2.0W/kg.
• In line with the requirements of the national standard GB 21288-2007.

Safety

Safety- In order to ensure safely using the product, you must strictly abide by the following rules

• The pad should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
• Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
• If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device.
• Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards.
• Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
• Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
• The company does not bear the responsibility for accidents caused by non-standard related charging equipment.
• If you want to read the full CE accomplice, please check this link: http://www.blackview.hk/ce/

Maintenance

• Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
• Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
• Please avoid falling, knocking or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
• Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
• Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
• If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds, the pad will be forced to restart (unlock the pad when restarting) It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

RF Specification

dBm

| 20 dBm.
WIFI 2.4G| 802.11b/g/n(20MHz): 2412~2472MHz;

802.11n(40MHz):2422~2462MHz

| 12.44 dBm| 20 dBm.
FM| Rx(Downlink): 87.5MHz~108MHzGPS| |
GPS|  Rx(Downlink): 1.57542GHz| |

Warning:

1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.
3.  The product shall only be connected to a USB interface of version USB2.0.
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. Operation temperature:10~ 40ºC.
6. The plug considered as disconnect device of adapter.
7. The device complies with RF specifications when the device used at 0mm form your body(SAR limit 2.0 W/Kg for 10g) and at 0mm form your Member(DAS limit 4.0 W/Kg for 10g). for 10g;
   Body SAR Value: 1.102W/Kg for 10g;
   Model: HJ0501000N2EU
   Input: 100240V~ 50/60Hz 0.15A
   Output: 5.0V 1.0A (5.0W)

Manufacturer: Shenzhen Hanjin Electronics Co., Ltd
Rechargeable Li-ion Battery; Model : U317296PV; Specification: DC 3.8V, 3280mAh,12.46Wh
Manufacturer: SHENZHEN UTILITY ENERGY CO.. LTD.

This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation.

EU Declaration of Conformity
We,
Shenzhen DOKE Electronic Co.,Ltd (801, Building3, 7th Industrial Zone, Yule Community, Yutan Road, Gunging District, Shenzhen, China) hereby declares that this Tablet PC is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
According to Article 10(2) of Directive 2014/53/EU, the Tab 3 Kids can be used in Europe without restriction.

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.
This device complies with part 15 of the FCG Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may causa undesired operation.
   This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or ammeter.

NOTE: This equipment has been tested and found to comply with the larnites for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  Interference to radio communications. However, there is no guarantee that interference will notocc11r in a particular installation.

If th.is equipment does causeharmful interference to radio or television reception, which can be determined by truing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help!

FCC RF Exposure Information and Statement the SAR limit of USA (FCC) isl.6 W /kg averaged over one gram of this Device Tab 3 Kids(2A7DX-T AB3KIDS) has been tested against this SAR larnite. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested for typical operations 0mm from the body. To maintain compliance with FCC RF exposure requirements, 0mm separation distance should. maintained to the user’s bodies

SAR Statement : Tablet has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in Canada that set the limit averaged over 1 gram of tissue. During testing, Tab 3 Kids (25768-TAR3KIDS) radios are set to their highest transmission levels and placed in positions that simulate uses against the head, with no separation, and when worn or carried against the torso of the body, with 0mm separation. To reduce exposure to RF energy, use a hands- free option, such as the built- in speaker phone, the supplied headphones, or other similar accessories. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.

CUSTOMER SUPPORT

Address: 801, Building3, 7th Industrial Zone, Yolk Community,
Yutan Road, Gangling District, Shenzhen, China
Website: www.blackview.hk
Follow Blackview community, a place where you
can share and discuss with Blackview user
keep posted with most up-to-day news
http://ww.blackview.hk

References

• Cool Rugged Phones & Tablets & Smartphones - Blackview

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>