nicknack GDL402 Ball Track Model Wooden Puzzle Marble Run Toy Instruction Manual
- June 1, 2024
- nicknack
Table of Contents
GDL402 Ball Track Model Wooden Puzzle Marble Run Toy
Product Information
Specifications:
-
Model: NO.GDL402 Ball Track
-
Parts Included: Color-changing steel ball, male and female
screws, screwdriver, lamp, wax block, sandpaper -
Assembly Difficulty: Intermediate
-
Recommended Age: 14+
Product Usage Instructions
Parts List:
- 20MM male screws x10
- 9MM female screws x6
- Color-changing steel ball x1
- Lamp x1
- Screwdriver x1
- Wipe cloth x1
- Wax block x1
- Sandpaper x1
Assembly Steps:
-
Before starting, carefully organize and identify all parts
required for each assembly step. -
Follow the provided instructions for each step of the assembly
process. -
If necessary, use sandpaper to smooth out any rough edges on
the parts. -
Ensure proper lubrication by applying wax to the designated
parts. -
Connect male and female screws as indicated in the manual using
the screwdriver. -
Check that all parts are securely in place before proceeding to
the next step. -
If stability is an issue after assembly, consider using glue to
reinforce connections.
Troubleshooting:
If you encounter any issues during assembly such as parts not
fitting correctly or excessive friction, refer to the manual for
specific solutions. Common problems and their solutions
include:
-
Problem: Transmission part is stuck
Reason: Friction between boards
Solution: Apply wax evenly, sand rough edges -
Problem: Steel ball stuck on the track
Reason: Bayonet not connected properly
Solution: Adjust track inclination, check
smoothness of track connections
Cleaning and Maintenance:
After completing assembly, clean the product with a cloth to
remove any dust or debris. Periodically lubricate moving parts with
wax to ensure smooth operation.
Additional Tips:
-
During assembly, press buckles firmly to ensure stability.
-
If parts do not conform to the drawings, follow the written
instructions instead. -
Keep spare parts handy in case of breakage during
assembly.
Frequently Asked Questions (FAQ)
Q: What should I do if some parts are missing?
A: If you find that some parts are missing, please contact
customer support for assistance. Make sure to have your product
information and proof of purchase ready.
Q: Can I disassemble the product after assembly?
A: Yes, you can disassemble the product if needed. Follow the
reverse steps of the assembly instructions carefully to avoid
damaging any parts.
NO.GDL402 BALL TRACK MODEL ASSEMBLY INSTRUCTIONS
Parts list
20MM
9MM
Color-changing
Male and
9MM
Steel ball
lamp
Screwdriver female screws Cross screw
X10
X6
X1
X2
X40
6MM
6MM Cross screw
X6
Wipe the cloth Wax block Sandpaper
X1
X1
X1
Problem
The transmission part is stuck
Steel ball stuck on the track
Reason
Solution
1.There is a lot of friction between the boards
2.The node burr is too long
1.Apply wax to the parts evenly 2.Sand the burr and make sure each part is in place
1.The bayonet is not connected to the bottom
2.Adjust the inclination of the track
1.The parts are in place 2.Check whether there is smoothness between the track and the track, and whether each track is installed in place
Tips
1
If it is not stable after installation, glue can be provided to make the
interface more stable
During the assembly process, the buckle needs to be pressed to the end to make it stable
F10 F8
Acrylic both sides need to tear cover film
E15 F10 D5
A40 A37
Remarks
1.Before assembly, carefully remove the parts required for each assembly step
and place them properly.
2.Some parts have spare parts. 3.If necessary, sand the parts with sandpaper.
4.Please keep the instructions for later reference. 5.If some parts do not
conform to the drawing, the number shall prevail. 6.The parts need to be
removed carefully. If there is a break during the
removal process, please bring your own glue to paste and repair.
It needs to be lubricated with wax
Ensure the bayonet connection between gears
Sand the parts with sandpaper
Make sure the parts rotate smoothly
Special attention should be paid to assembly
Clean with a cloth
Turn clockwise to tighten
Remove the surface coating
2
Acrylic both sides need
to tear cover film
F11 F9
E16 D5
C26
D5
C25
1
3
A32
E7
D15
D16
4
A33
G2 E7
G1 E6
E7
A32
F13
Acrylic both sides need to tear cover film
G2
Turn clockwise to tighten
9MM
Cross screw X8
G1
Turn clockwise to tighten
E9 G2
G1
Cross
D12
screw
F13 G1 G2 E9
5
Acrylic both sides need
6
to tear cover film
D7
Acrylic both sides need to tear cover film
It needs to be lubricated
D8
D6
with wax
G11
It needs to
be lubricated
with wax G11
A6
D18
E12
D17
F7
Clean with
a cloth
A2
D13 F7
Clean with a cloth
Acrylic both sides need to tear cover film
7
Acrylic both sides need to tear cover
film
E13
F5
E19 F5
female screws
A41
E10 E11
Male and female
screws
X2
2
20MM
8
Turn clockwise
to tighten
Male screws
12
Acrylic both sides need to tear cover film
D19
D21
E8
D22 It needs to be lubricated with wax
A3 A1
9
A4 A5
10
A7
Male and female
screws
X2
D20
E8
20MM
D11 D10 F6 D12
Acrylic both sides need to tear
cover film
D9
13
D24 D22
9MM
Cross screw X12
Turn clockwise to tighten
Cross
d screw
Sand the parts
D23
with sandpaper
It needs to be lubricated with wax
It needs to be lubricated with wax
x6
Install six sets
11
Acrylic both sides need to tear
cover film
r
Ensure the bayonet connection between gears
B18 B10
Make sure the parts B9
rotate smoothly
14
D2
D1
A35
15
D27
d
F4
d ef
g hi
x6
d
3
16
F1
F3
Acrylic both sides need to tear cover film
E1
Acrylic both sides need to tear cover film
F2
D27
F3
17
F1 E1
D27
F3
F1
D2
F4 D1
e
F1
Acrylic both sides need to tear cover film
E1 F1
F3 D2 D1
E1 F1
F3 D2 D1
E1
E2
D3
F2
D4
f
Acrylic both sides need to tear cover film
D27
F4 18
F1
g
C28
Acrylic both sides need to tear cover film
D27
F4
F1
h
F1 F3 D3
D4
19 Acrylic both
sides need to tear cover film
D27
F1
i
C27
20
Insert position
A36
Color-changing lamp
4
9MM 9MM
21
Acrylic both sides need to tear cover film
A31
G8
24
Turn
Acrylic both
clockwise
sides need to
to tighten
tear cover film
i
Cross screw
X3
A15
A16
A39
A39
m
B15
22
B2 B6
B3
G8
A31
23
B6 B2
F12
B3
25
6MM
Ensure the Cross screw X6
bayonet
connection
a
between gears
Acrylic both sides need to tear cover film
E3
E5
Turn
clockwise to tighten
26
E17 D26
b
E4
c
E18
Acrylic both sides need to tear cover film
B18 B12
B11
E14
B2 G5 B2
Turn clockwise to tighten
Cross screw
X2
D25 A22
E17 A39
5
27
D26
c ba
28
29
Colorchanging
lamp
C3
33
Insert position
F14
C22 G6 C1
C21 C20
31
D25
B5
B4
Acrylic both sides need to tear cover film
Clean with a cloth
Acrylic both sides need totear cover film
34
G7
C2 C24
C1
C23
35
Acrylic both sides need to tear cover film
B2 F15
B2
C19
36
B2
c b a
G4
B2
B2
32
Clean with a cloth
Clean with a cloth
Acrylic both sides need to tear cover film
Clean with a cloth
6
37
C9 C5 C7
B1
41
B14 B16
B13
38
C15 C12
C13
39
C16 C4
42
B8
B17
B7
A34
C6 C10
40
C11
C14
C18
C17
43 9MM Cross screw X4
A10
Turn clockwise to tighten
Acrylic both sides need to tear cover film
DETAIL DETAIL
7
44
Acrylic both sides need to tear cover film
45
A12
n
A11
46
47 G10
Acrylic both sides need to tear cover film
48
A8 A9
49 A23 A24
A23
50
9MM
Cross screw X2
Turn clockwise to tighten
Acrylic both
A21
sides need to
tear cover film A39
B18
9MM
Cross screw X2
Turn clockwise to tighten
51
A20
G9
A39
52
A19 A39
Colorchanging
lamp
A28 A29
8
53
54
55
A26
A27
56
A30
A25
57
Make sure the parts rotate smoothly
58
59
C8 B18
Acrylic both sides need to tear cover film
s
9
60
A13
9MM
Cross screw X3
Turn clockwise to tighten
A14 A39
A39
61 A17
A39
Acrylic both sides need to tear cover film
9MM
Cross screw X4
k
A39
Turn clockwise to tighten
A18 A39
62
63
64
65
C29
66
Lamp Insert position
B20
B19
B20
B20
B19
Color-
Color-
changing
B19 changing
lamp
lamp
A38
Color-changing lamp Use 3 LR41 button
batteries
Please pull out the insulation sheet before use
67
Turn the lights on clockwise
Turn off the light counterclockwise
Clean with a cloth
Finish
10
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>