YFW Technology YFW-W002 3-In-1 Wireless Charging Stand Instruction Manual

June 6, 2024
YFW Technology

YFW Technology YFW-W002 3-In-1 Wireless Charging Stand Instruction Manual

Please read the instructions carefully first.in order to install the product correctly for quick use.

Product Introduction

FIG 1 Product Introduction.JPG

  1. Airpods Charging back
  2. Cable management
  3. Anti-slip Mat
  4. Apple Watch Silica gel plug
  5. Anti-slip removable rubber(washable for multiple times)
  6. Mobile Phone Wireless Charging Pad
  7. Indicator light
  8. Type-c Interface

Specifications

FIG 2 Specifications.JPG

FCC ID:2AY3K-YFWW002
Applicable Mobile Phone Mode: Mobile phone with wireless charging function or external wireless charging receiver

For Apple Watch series 514/3/2/1 /Nike+/Sport/Edition(Both 38/40/42/44mm);Apple Airpods, Apple Airpods Pro

NOTE.
Do not use Apple’s 5v/1A stock charger or a computer’s usb port to power your wireless charger. cases made of metal, attachments such as magnets, cards, grips will interfere with charging quick charge 3.0 wall adapter required for fast charge mode

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Wireless charging mode

FIG 3 Apple Watch cable installation steps.JPG

Apple Watch cable installation steps

FIG 4 Apple Watch cable installation steps.JPG

FIG 5 Apple Watch cable installation steps.JPG

FIG 6 Apple Watch cable installation steps.JPG

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals