blink H2211672 Indoor and Outdoor Wireless HD Security Camera User Guide
- June 5, 2024
- blink
Table of Contents
blink H2211672 Indoor and Outdoor Wireless HD Security Camera
Getting started with Blink is easy!
Existing users skip to step 3
- Download the Blink Home Monitor App.
- Add your Sync Module 2.
- Add your camera(s) to your system.
Follow the in-app instructions to complete setup.
For more detailed setup and mounting instructions go to
blinkforhome.com/setup or scan the QR code.
IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC
SHOCK, OR OTHER INJURY OR DAMAGE.
BATTERY SAFETY
The Lithium batteries accompanying this device cannot be recharged. Do not
open, disassemble, bend, deform, puncture, or shred the battery. Do not
modify, attempt to insert foreign objects into the battery or immerse or
expose to water or other liquids. Do not expose the battery to fire,
explosion, high temperature or other hazard. Fires involving lithium batteries
can usually be controlled with flooding with water, except in confined spaces
where a smothering agent should be used.
If dropped and you suspect damage, take steps to prevent any ingestion or
direct contact of fluids and any other materials from the battery with skin or
clothes. If a battery leaks, remove all batteries and recycle or dispose of
them in accordance with battery manufacturer’s recommendations. If fluid or
other material from the battery comes into contact with skin or clothes, flush
skin or clothes with water immediately. An open battery should never be
exposed to water, as fire or explosion may result from exposure to water.
Insert the batteries in the proper direction as indicated by positive (+) and
negative (-) markings in battery compartment. Always replace with non-
rechargeable AA 1.5V Lithium batteries (lithium metal batteries) specified for
this product.
Do not mix used and new batteries or batteries of different types (for
example, Lithium and alkaline batteries). Always remove old, weak, or worn-out
batteries promptly and recycle or dispose of them in accordance with
applicable laws and regulations.
Do not expose your device or adapter to liquids. If your device or adapter
gets wet, carefully unplug all cables without getting your hands wet and wait
for the device and adapter to dry completely before plugging them in again. Do
not attempt to dry your device or adapter with an external heat source, such
as a microwave oven or a hair dryer. If the device or adapter appear damaged,
discontinue use immediately. Use only accessories supplied with the device to
power your device. To avoid risk of electric shock, do not touch your device
or any wires connected to your device during a lightning storm.
PRODUCT SPECIFICATIONS Blink Indoor, Blink Outdoor
Model Number: BCM00410U, BCM00400U, BCM00401U, BCM00411U Electrical Rating: 2
1.5V AA Single Use Lithium Metal batteries and optional USB 5V 1A external
power supply.
Operating Temperature Range Blink Outdoor: -20 to 45 °C Operating Temperature
Range Blink Indoor: 0 to 35 °C
FOR CANADIAN CUSTOMERS
Innovation, Science and Economic Development Canada (ISED) Compliance
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Information Regarding Exposure to Radio Frequency Energy This equipment
complies with IC RSS-102 RF exposure limits set
©2022 Amazon.com, Inc. or its affiliates. Amazon, Blink, and all related marks
are trademarks of Amazon.com, Inc. or its affiliates. Designed in
Massachusetts.
References
- . Spend less. Smile more.
- Setting up your Blink devices — Blink Support
- Amazon Digital Services and Device Support - Amazon Customer Service
- Blink Smart Security