BirdDog Dante NDI Bridge User Guide
- June 4, 2024
- BirdDog
Table of Contents
BirdDog Dante NDI Bridge
A SHORT WALK THROUGH DANTE NDI BRIDGE
❶ Choose your Network Adaptor (your Dante Network).
❷ Activate or Deactivate the BirdDog Comms Pro compatibility.
❸ Dante to NDI If No. of Audio Channels is set on “6 Channels”, you need to
choose an NDI Output Name for your Dante to NDI.
If No. of Audio Channels is set on “Stereo Pair”, you need to choose all 3 NDI
Output Names for your Dante to NDI.
❹ NDI to Dante You need to select which NDI Source you prefer to use.
❺ Once the above settings are complete you can activate Dante with the toggle.
Allow the software to load. 6
❻ Once running you can turn ON/OFF Dante to NDI or NDI to Dante
(these functions are only active once Dante is turned on as per instruction ❺
)
NOTE:
To modify the NDI Output Name or the NDI source, you need to turn OFF the
Dante main toggle ( ❺ )
To access the free Dante Controller just press the CONFIGURE button on the
top-right side. ( ❼ ). Dante Controller is required to be running somewhere on
the network.
❽ You can now add a Dante Name.
IMPORTANT NOTES:
Ensure Internet connection
Install NDI Tools
click here
Install Dante Controller
click here
Help & Support
[email protected]