GELID Solutions M.2 SSD IceCap Pro Cooler User Guide
- June 9, 2024
- GELID Solutions
Table of Contents
GELID Solutions M.2 SSD IceCap Pro Cooler User Guide
Installation Instructions
-
Peel off the protective film and apply the (2) Thermal Pad onto the top of your (3) M.2 Type 2280 SSD.
-
Peel off the protective film and apply the (4) Thermal Pad into the inner surface of the (5) bottom.
-
Attach the (1) Heatsink on top of your M.2 Type 2280 SSD.
-
Align the position and put it into inner surface of the (5) bottom.
-
Fasten the 4 screws to assembly the cooler.
-
Plug in the 4 Pin PWM Connector into 4 Pin PWM Socket of your motherboard.
Limits of Warranty
Warranty coverage does not include the following:
- A faulty product that leads to harm or damage to other products
- Damage of product as a result of other product components
- Incorrect method of operation or use of product not for intended use
- Any form of alteration to original product
- Inability to install the product as a result of incompatibility with other components.
The Specifications are subject to change without notice. Please consult our website for further information: www.gelidsolutions.com
Disclaimer:
In no event shall GELID Solutions its directors or employees be liable for any
indirect damages, incidental or consequential damages arising from any defect
or error in this manual or product.
© Copyright 2022 All rights reserved by GELID Solutions Limited All Brand names and Trademarks are the properties of their respective owners.